diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..d1b4432
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,5 @@
+coral-jupyter-server (0.0.1-1) mendel-chef; urgency=medium
+
+  * Initial release.
+
+ -- Coral <coral-support@google.com>  Wed, 17 Sep 2019 23:28:51 +0000
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..79bd105
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,13 @@
+Source: coral-jupyter-server
+Section: devel
+Priority: optional
+Maintainer: AIY Team <coral-support@google.com>
+Build-Depends: debhelper (>= 9)
+Standards-Version: 3.9.8
+Homepage: https://aiyprojects.withgoogle.com/
+
+Package: coral-jupyter-server
+Version: 0.0.1
+Architecture: all
+Depends: jupyter-notebook, mendel-minimal
+Description: Sets up a Jupyter notebook to run Coral demos
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..f11f694
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,27 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: coral-jupyter-server
+Source: <https://aiyprojects.googlesource.com/>
+
+Files: *
+Copyright: Copyright 2019 Google, LLC <coral-support@google.com>
+License: Apache-2.0
+
+Files: debian/*
+Copyright: 2019 Google, LLC <coral-support@google.com>
+License: Apache-2.0
+
+License: Apache-2.0
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+ .
+ https://www.apache.org/licenses/LICENSE-2.0
+ .
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ .
+ On Debian systems, the complete text of the Apache version 2.0 license
+ can be found in "/usr/share/common-licenses/Apache-2.0".
diff --git a/debian/coral-jupyter-server.install b/debian/coral-jupyter-server.install
new file mode 100644
index 0000000..777f0f7
--- /dev/null
+++ b/debian/coral-jupyter-server.install
@@ -0,0 +1,2 @@
+etc /
+var /
\ No newline at end of file
diff --git a/debian/coral-jupyter-server.service b/debian/coral-jupyter-server.service
new file mode 100644
index 0000000..d9324ca
--- /dev/null
+++ b/debian/coral-jupyter-server.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=Coral Jupyter Server
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/jupyter-notebook --config=/etc/coral-jupyter-server/jupyter_notebook_config.py
+ExecStop=/usr/bin/jupyter-notebook stop 7000
+User=mendel
+Group=mendel
+WorkingDirectory=/var/lib/coral-jupyter-server
+
+[Install]
+WantedBy=multi-user.target
diff --git a/debian/postinst b/debian/postinst
new file mode 100644
index 0000000..c7fe32d
--- /dev/null
+++ b/debian/postinst
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+chown -R mendel /var/lib/coral-jupyter-server/
+chgrp -R mendel /var/lib/coral-jupyter-server/
\ No newline at end of file
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..d90e714
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,27 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+# export DH_VERBOSE = 1
+
+
+# see FEATURE AREAS in dpkg-buildflags(1)
+#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# see ENVIRONMENT in dpkg-buildflags(1)
+# package maintainers to append CFLAGS
+#export DEB_CFLAGS_MAINT_APPEND  = -Wall -pedantic
+# package maintainers to append LDFLAGS
+#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
+
+
+%:
+	dh $@
+
+override_dh_systemd_enable:
+	dh_systemd_enable --name=coral-jupyter-server
+
+# dh_make generated override targets
+# This is example for Cmake (See https://bugs.debian.org/641051 )
+#override_dh_auto_configure:
+#	dh_auto_configure -- #	-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH)
+
diff --git a/etc/coral-jupyter-server/jupyter_notebook_config.py b/etc/coral-jupyter-server/jupyter_notebook_config.py
new file mode 100644
index 0000000..7ad0617
--- /dev/null
+++ b/etc/coral-jupyter-server/jupyter_notebook_config.py
@@ -0,0 +1,855 @@
+# Configuration file for jupyter-notebook.
+
+#------------------------------------------------------------------------------
+# Application(SingletonConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## This is an application.
+
+## The date format used by logging formatters for %(asctime)s
+#c.Application.log_datefmt = '%Y-%m-%d %H:%M:%S'
+
+## The Logging format template
+#c.Application.log_format = '[%(name)s]%(highlevel)s %(message)s'
+
+## Set the log level by value or name.
+#c.Application.log_level = 30
+
+#------------------------------------------------------------------------------
+# JupyterApp(Application) configuration
+#------------------------------------------------------------------------------
+
+## Base class for Jupyter applications
+
+## Answer yes to any prompts.
+#c.JupyterApp.answer_yes = False
+
+## Full path of a config file.
+#c.JupyterApp.config_file = ''
+
+## Specify a config file to load.
+#c.JupyterApp.config_file_name = ''
+
+## Generate default config file.
+#c.JupyterApp.generate_config = False
+
+#------------------------------------------------------------------------------
+# NotebookApp(JupyterApp) configuration
+#------------------------------------------------------------------------------
+
+## Set the Access-Control-Allow-Credentials: true header
+#c.NotebookApp.allow_credentials = False
+
+## Set the Access-Control-Allow-Origin header
+#
+#  Use '*' to allow any origin to access your server.
+#
+#  Takes precedence over allow_origin_pat.
+c.NotebookApp.allow_origin = 'https://colab.research.google.com'
+
+## Use a regular expression for the Access-Control-Allow-Origin header
+#
+#  Requests from an origin matching the expression will get replies with:
+#
+#      Access-Control-Allow-Origin: origin
+#
+#  where `origin` is the origin of the request.
+#
+#  Ignored if allow_origin is set.
+#c.NotebookApp.allow_origin_pat = ''
+
+## Allow password to be changed at login for the notebook server.
+#
+#  While loggin in with a token, the notebook server UI will give the opportunity
+#  to the user to enter a new password at the same time that will replace the
+#  token login mechanism.
+#
+#  This can be set to false to prevent changing password from the UI/API.
+#c.NotebookApp.allow_password_change = True
+
+## Allow requests where the Host header doesn't point to a local server
+#
+#  By default, requests get a 403 forbidden response if the 'Host' header shows
+#  that the browser thinks it's on a non-local domain. Setting this option to
+#  True disables this check.
+#
+#  This protects against 'DNS rebinding' attacks, where a remote web server
+#  serves you a page and then changes its DNS to send later requests to a local
+#  IP, bypassing same-origin checks.
+#
+#  Local IP addresses (such as 127.0.0.1 and ::1) are allowed as local, along
+#  with hostnames configured in local_hostnames.
+#c.NotebookApp.allow_remote_access = False
+
+## Whether to allow the user to run the notebook as root.
+#c.NotebookApp.allow_root = False
+
+## DEPRECATED use base_url
+#c.NotebookApp.base_project_url = '/'
+
+## The base URL for the notebook server.
+#
+#  Leading and trailing slashes can be omitted, and will automatically be added.
+#c.NotebookApp.base_url = '/'
+
+## Specify what command to use to invoke a web browser when opening the notebook.
+#  If not specified, the default browser will be determined by the `webbrowser`
+#  standard library module, which allows setting of the BROWSER environment
+#  variable to override it.
+#c.NotebookApp.browser = ''
+
+## The full path to an SSL/TLS certificate file.
+#c.NotebookApp.certfile = ''
+
+## The full path to a certificate authority certificate for SSL/TLS client
+#  authentication.
+#c.NotebookApp.client_ca = ''
+
+## The config manager class to use
+#c.NotebookApp.config_manager_class = 'notebook.services.config.manager.ConfigManager'
+
+## The notebook manager class to use.
+#c.NotebookApp.contents_manager_class = 'notebook.services.contents.largefilemanager.LargeFileManager'
+
+## Extra keyword arguments to pass to `set_secure_cookie`. See tornado's
+#  set_secure_cookie docs for details.
+#c.NotebookApp.cookie_options = {}
+
+## The random bytes used to secure cookies. By default this is a new random
+#  number every time you start the Notebook. Set it to a value in a config file
+#  to enable logins to persist across server sessions.
+#
+#  Note: Cookie secrets should be kept private, do not share config files with
+#  cookie_secret stored in plaintext (you can read the value from a file).
+#c.NotebookApp.cookie_secret = b''
+
+## The file where the cookie secret is stored.
+#c.NotebookApp.cookie_secret_file = ''
+
+## Override URL shown to users.
+#
+#  Replace actual URL, including protocol, address, port and base URL, with the
+#  given value when displaying URL to the users. Do not change the actual
+#  connection URL. If authentication token is enabled, the token is added to the
+#  custom URL automatically.
+#
+#  This option is intended to be used when the URL to display to the user cannot
+#  be determined reliably by the Jupyter notebook server (proxified or
+#  containerized setups for example).
+#c.NotebookApp.custom_display_url = ''
+
+## The default URL to redirect to from `/`
+#c.NotebookApp.default_url = '/tree'
+
+## Disable cross-site-request-forgery protection
+#
+#  Jupyter notebook 4.3.1 introduces protection from cross-site request
+#  forgeries, requiring API requests to either:
+#
+#  - originate from pages served by this server (validated with XSRF cookie and
+#  token), or - authenticate with a token
+#
+#  Some anonymous compute resources still desire the ability to run code,
+#  completely without authentication. These services can disable all
+#  authentication and security checks, with the full knowledge of what that
+#  implies.
+#c.NotebookApp.disable_check_xsrf = False
+
+## Whether to enable MathJax for typesetting math/TeX
+#
+#  MathJax is the javascript library Jupyter uses to render math/LaTeX. It is
+#  very large, so you may want to disable it if you have a slow internet
+#  connection, or for offline use of the notebook.
+#
+#  When disabled, equations etc. will appear as their untransformed TeX source.
+#c.NotebookApp.enable_mathjax = True
+
+## extra paths to look for Javascript notebook extensions
+#c.NotebookApp.extra_nbextensions_path = []
+
+## handlers that should be loaded at higher priority than the default services
+#c.NotebookApp.extra_services = []
+
+## Extra paths to search for serving static files.
+#
+#  This allows adding javascript/css to be available from the notebook server
+#  machine, or overriding individual files in the IPython
+#c.NotebookApp.extra_static_paths = []
+
+## Extra paths to search for serving jinja templates.
+#
+#  Can be used to override templates from notebook.templates.
+#c.NotebookApp.extra_template_paths = []
+
+##
+#c.NotebookApp.file_to_run = ''
+
+## Extra keyword arguments to pass to `get_secure_cookie`. See tornado's
+#  get_secure_cookie docs for details.
+#c.NotebookApp.get_secure_cookie_kwargs = {}
+
+## Deprecated: Use minified JS file or not, mainly use during dev to avoid JS
+#  recompilation
+#c.NotebookApp.ignore_minified_js = False
+
+## (bytes/sec) Maximum rate at which stream output can be sent on iopub before
+#  they are limited.
+#c.NotebookApp.iopub_data_rate_limit = 1000000
+
+## (msgs/sec) Maximum rate at which messages can be sent on iopub before they are
+#  limited.
+#c.NotebookApp.iopub_msg_rate_limit = 1000
+
+## The IP address the notebook server will listen on.
+c.NotebookApp.ip = '192.168.100.2'
+
+## Supply extra arguments that will be passed to Jinja environment.
+#c.NotebookApp.jinja_environment_options = {}
+
+## Extra variables to supply to jinja templates when rendering.
+#c.NotebookApp.jinja_template_vars = {}
+
+## The kernel manager class to use.
+#c.NotebookApp.kernel_manager_class = 'notebook.services.kernels.kernelmanager.MappingKernelManager'
+
+## The kernel spec manager class to use. Should be a subclass of
+#  `jupyter_client.kernelspec.KernelSpecManager`.
+#
+#  The Api of KernelSpecManager is provisional and might change without warning
+#  between this version of Jupyter and the next stable one.
+#c.NotebookApp.kernel_spec_manager_class = 'jupyter_client.kernelspec.KernelSpecManager'
+
+## The full path to a private key file for usage with SSL/TLS.
+#c.NotebookApp.keyfile = ''
+
+## Hostnames to allow as local when allow_remote_access is False.
+#
+#  Local IP addresses (such as 127.0.0.1 and ::1) are automatically accepted as
+#  local as well.
+#c.NotebookApp.local_hostnames = ['localhost']
+
+## The login handler class to use.
+#c.NotebookApp.login_handler_class = 'notebook.auth.login.LoginHandler'
+
+## The logout handler class to use.
+#c.NotebookApp.logout_handler_class = 'notebook.auth.logout.LogoutHandler'
+
+## The MathJax.js configuration file that is to be used.
+#c.NotebookApp.mathjax_config = 'TeX-AMS-MML_HTMLorMML-full,Safe'
+
+## A custom url for MathJax.js. Should be in the form of a case-sensitive url to
+#  MathJax, for example:  /static/components/MathJax/MathJax.js
+#c.NotebookApp.mathjax_url = ''
+
+## Sets the maximum allowed size of the client request body, specified in  the
+#  Content-Length request header field. If the size in a request  exceeds the
+#  configured value, a malformed HTTP message is returned to the client.
+#
+#  Note: max_body_size is applied even in streaming mode.
+#c.NotebookApp.max_body_size = 536870912
+
+## Gets or sets the maximum amount of memory, in bytes, that is allocated  for
+#  use by the buffer manager.
+#c.NotebookApp.max_buffer_size = 536870912
+
+## Dict of Python modules to load as notebook server extensions.Entry values can
+#  be used to enable and disable the loading ofthe extensions. The extensions
+#  will be loaded in alphabetical order.
+#c.NotebookApp.nbserver_extensions = {}
+
+## The directory to use for notebooks and kernels.
+#c.NotebookApp.notebook_dir = ''
+
+## Whether to open in a browser after starting. The specific browser used is
+#  platform dependent and determined by the python standard library `webbrowser`
+#  module, unless it is overridden using the --browser (NotebookApp.browser)
+#  configuration option.
+c.NotebookApp.open_browser = False
+
+## Hashed password to use for web authentication.
+#
+#  To generate, type in a python/IPython shell:
+#
+#    from notebook.auth import passwd; passwd()
+#
+#  The string should be of the form type:salt:hashed-password.
+#c.NotebookApp.password = ''
+
+## Forces users to use a password for the Notebook server. This is useful in a
+#  multi user environment, for instance when everybody in the LAN can access each
+#  other's machine through ssh.
+#
+#  In such a case, server the notebook server on localhost is not secure since
+#  any user can connect to the notebook server via ssh.
+#c.NotebookApp.password_required = False
+
+## The port the notebook server will listen on.
+c.NotebookApp.port = 7000
+
+## The number of additional ports to try if the specified port is not available.
+#c.NotebookApp.port_retries = 50
+
+## DISABLED: use %pylab or %matplotlib in the notebook to enable matplotlib.
+#c.NotebookApp.pylab = 'disabled'
+
+## If True, display a button in the dashboard to quit (shutdown the notebook
+#  server).
+#c.NotebookApp.quit_button = True
+
+## (sec) Time window used to  check the message and data rate limits.
+#c.NotebookApp.rate_limit_window = 3
+
+## Reraise exceptions encountered loading server extensions?
+#c.NotebookApp.reraise_server_extension_failures = False
+
+## DEPRECATED use the nbserver_extensions dict instead
+#c.NotebookApp.server_extensions = []
+
+## The session manager class to use.
+#c.NotebookApp.session_manager_class = 'notebook.services.sessions.sessionmanager.SessionManager'
+
+## Shut down the server after N seconds with no kernels or terminals running and
+#  no activity. This can be used together with culling idle kernels
+#  (MappingKernelManager.cull_idle_timeout) to shutdown the notebook server when
+#  it's not in use. This is not precisely timed: it may shut down up to a minute
+#  later. 0 (the default) disables this automatic shutdown.
+#c.NotebookApp.shutdown_no_activity_timeout = 0
+
+## Supply SSL options for the tornado HTTPServer. See the tornado docs for
+#  details.
+#c.NotebookApp.ssl_options = {}
+
+## Supply overrides for terminado. Currently only supports "shell_command".
+#c.NotebookApp.terminado_settings = {}
+
+## Set to False to disable terminals.
+#
+#  This does *not* make the notebook server more secure by itself. Anything the
+#  user can in a terminal, they can also do in a notebook.
+#
+#  Terminals may also be automatically disabled if the terminado package is not
+#  available.
+#c.NotebookApp.terminals_enabled = True
+
+## Token used for authenticating first-time connections to the server.
+#
+#  When no password is enabled, the default is to generate a new, random token.
+#
+#  Setting to an empty string disables authentication altogether, which is NOT
+#  RECOMMENDED.
+c.NotebookApp.token = ''
+
+## Supply overrides for the tornado.web.Application that the Jupyter notebook
+#  uses.
+#c.NotebookApp.tornado_settings = {}
+
+## Whether to trust or not X-Scheme/X-Forwarded-Proto and X-Real-Ip/X-Forwarded-
+#  For headerssent by the upstream reverse proxy. Necessary if the proxy handles
+#  SSL
+#c.NotebookApp.trust_xheaders = False
+
+## DEPRECATED, use tornado_settings
+#c.NotebookApp.webapp_settings = {}
+
+## Specify Where to open the notebook on startup. This is the `new` argument
+#  passed to the standard library method `webbrowser.open`. The behaviour is not
+#  guaranteed, but depends on browser support. Valid values are:
+#
+#   - 2 opens a new tab,
+#   - 1 opens a new window,
+#   - 0 opens in an existing window.
+#
+#  See the `webbrowser.open` documentation for details.
+#c.NotebookApp.webbrowser_open_new = 2
+
+## Set the tornado compression options for websocket connections.
+#
+#  This value will be returned from
+#  :meth:`WebSocketHandler.get_compression_options`. None (default) will disable
+#  compression. A dict (even an empty one) will enable compression.
+#
+#  See the tornado docs for WebSocketHandler.get_compression_options for details.
+#c.NotebookApp.websocket_compression_options = None
+
+## The base URL for websockets, if it differs from the HTTP server (hint: it
+#  almost certainly doesn't).
+#
+#  Should be in the form of an HTTP origin: ws[s]://hostname[:port]
+#c.NotebookApp.websocket_url = ''
+
+#------------------------------------------------------------------------------
+# ConnectionFileMixin(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## Mixin for configurable classes that work with connection files
+
+## JSON file in which to store connection info [default: kernel-<pid>.json]
+#
+#  This file will contain the IP, ports, and authentication key needed to connect
+#  clients to this kernel. By default, this file will be created in the security
+#  dir of the current profile, but can be specified by absolute path.
+#c.ConnectionFileMixin.connection_file = ''
+
+## set the control (ROUTER) port [default: random]
+#c.ConnectionFileMixin.control_port = 0
+
+## set the heartbeat port [default: random]
+#c.ConnectionFileMixin.hb_port = 0
+
+## set the iopub (PUB) port [default: random]
+#c.ConnectionFileMixin.iopub_port = 0
+
+## Set the kernel's IP address [default localhost]. If the IP address is
+#  something other than localhost, then Consoles on other machines will be able
+#  to connect to the Kernel, so be careful!
+#c.ConnectionFileMixin.ip = ''
+
+## set the shell (ROUTER) port [default: random]
+#c.ConnectionFileMixin.shell_port = 0
+
+## set the stdin (ROUTER) port [default: random]
+#c.ConnectionFileMixin.stdin_port = 0
+
+##
+#c.ConnectionFileMixin.transport = 'tcp'
+
+#------------------------------------------------------------------------------
+# KernelManager(ConnectionFileMixin) configuration
+#------------------------------------------------------------------------------
+
+## Manages a single kernel in a subprocess on this host.
+#
+#  This version starts kernels with Popen.
+
+## Should we autorestart the kernel if it dies.
+#c.KernelManager.autorestart = True
+
+## DEPRECATED: Use kernel_name instead.
+#
+#  The Popen Command to launch the kernel. Override this if you have a custom
+#  kernel. If kernel_cmd is specified in a configuration file, Jupyter does not
+#  pass any arguments to the kernel, because it cannot make any assumptions about
+#  the arguments that the kernel understands. In particular, this means that the
+#  kernel does not receive the option --debug if it given on the Jupyter command
+#  line.
+#c.KernelManager.kernel_cmd = []
+
+## Time to wait for a kernel to terminate before killing it, in seconds.
+#c.KernelManager.shutdown_wait_time = 5.0
+
+#------------------------------------------------------------------------------
+# Session(Configurable) configuration
+#------------------------------------------------------------------------------
+
+## Object for handling serialization and sending of messages.
+#
+#  The Session object handles building messages and sending them with ZMQ sockets
+#  or ZMQStream objects.  Objects can communicate with each other over the
+#  network via Session objects, and only need to work with the dict-based IPython
+#  message spec. The Session will handle serialization/deserialization, security,
+#  and metadata.
+#
+#  Sessions support configurable serialization via packer/unpacker traits, and
+#  signing with HMAC digests via the key/keyfile traits.
+#
+#  Parameters ----------
+#
+#  debug : bool
+#      whether to trigger extra debugging statements
+#  packer/unpacker : str : 'json', 'pickle' or import_string
+#      importstrings for methods to serialize message parts.  If just
+#      'json' or 'pickle', predefined JSON and pickle packers will be used.
+#      Otherwise, the entire importstring must be used.
+#
+#      The functions must accept at least valid JSON input, and output *bytes*.
+#
+#      For example, to use msgpack:
+#      packer = 'msgpack.packb', unpacker='msgpack.unpackb'
+#  pack/unpack : callables
+#      You can also set the pack/unpack callables for serialization directly.
+#  session : bytes
+#      the ID of this Session object.  The default is to generate a new UUID.
+#  username : unicode
+#      username added to message headers.  The default is to ask the OS.
+#  key : bytes
+#      The key used to initialize an HMAC signature.  If unset, messages
+#      will not be signed or checked.
+#  keyfile : filepath
+#      The file containing a key.  If this is set, `key` will be initialized
+#      to the contents of the file.
+
+## Threshold (in bytes) beyond which an object's buffer should be extracted to
+#  avoid pickling.
+#c.Session.buffer_threshold = 1024
+
+## Whether to check PID to protect against calls after fork.
+#
+#  This check can be disabled if fork-safety is handled elsewhere.
+#c.Session.check_pid = True
+
+## Threshold (in bytes) beyond which a buffer should be sent without copying.
+#c.Session.copy_threshold = 65536
+
+## Debug output in the Session
+#c.Session.debug = False
+
+## The maximum number of digests to remember.
+#
+#  The digest history will be culled when it exceeds this value.
+#c.Session.digest_history_size = 65536
+
+## The maximum number of items for a container to be introspected for custom
+#  serialization. Containers larger than this are pickled outright.
+#c.Session.item_threshold = 64
+
+## execution key, for signing messages.
+#c.Session.key = b''
+
+## path to file containing execution key.
+#c.Session.keyfile = ''
+
+## Metadata dictionary, which serves as the default top-level metadata dict for
+#  each message.
+#c.Session.metadata = {}
+
+## The name of the packer for serializing messages. Should be one of 'json',
+#  'pickle', or an import name for a custom callable serializer.
+#c.Session.packer = 'json'
+
+## The UUID identifying this session.
+#c.Session.session = ''
+
+## The digest scheme used to construct the message signatures. Must have the form
+#  'hmac-HASH'.
+#c.Session.signature_scheme = 'hmac-sha256'
+
+## The name of the unpacker for unserializing messages. Only used with custom
+#  functions for `packer`.
+#c.Session.unpacker = 'json'
+
+## Username for the Session. Default is your system username.
+#c.Session.username = 'mendel'
+
+#------------------------------------------------------------------------------
+# MultiKernelManager(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## A class for managing multiple kernels.
+
+## The name of the default kernel to start
+#c.MultiKernelManager.default_kernel_name = 'python3'
+
+## The kernel manager class.  This is configurable to allow subclassing of the
+#  KernelManager for customized behavior.
+#c.MultiKernelManager.kernel_manager_class = 'jupyter_client.ioloop.IOLoopKernelManager'
+
+#------------------------------------------------------------------------------
+# MappingKernelManager(MultiKernelManager) configuration
+#------------------------------------------------------------------------------
+
+## A KernelManager that handles notebook mapping and HTTP error handling
+
+## White list of allowed kernel message types. When the list is empty, all
+#  message types are allowed.
+#c.MappingKernelManager.allowed_message_types = []
+
+## Whether messages from kernels whose frontends have disconnected should be
+#  buffered in-memory.
+#
+#  When True (default), messages are buffered and replayed on reconnect, avoiding
+#  lost messages due to interrupted connectivity.
+#
+#  Disable if long-running kernels will produce too much output while no
+#  frontends are connected.
+#c.MappingKernelManager.buffer_offline_messages = True
+
+## Whether to consider culling kernels which are busy. Only effective if
+#  cull_idle_timeout > 0.
+#c.MappingKernelManager.cull_busy = False
+
+## Whether to consider culling kernels which have one or more connections. Only
+#  effective if cull_idle_timeout > 0.
+#c.MappingKernelManager.cull_connected = False
+
+## Timeout (in seconds) after which a kernel is considered idle and ready to be
+#  culled. Values of 0 or lower disable culling. Very short timeouts may result
+#  in kernels being culled for users with poor network connections.
+#c.MappingKernelManager.cull_idle_timeout = 0
+
+## The interval (in seconds) on which to check for idle kernels exceeding the
+#  cull timeout value.
+#c.MappingKernelManager.cull_interval = 300
+
+## Timeout for giving up on a kernel (in seconds).
+#
+#  On starting and restarting kernels, we check whether the kernel is running and
+#  responsive by sending kernel_info_requests. This sets the timeout in seconds
+#  for how long the kernel can take before being presumed dead. This affects the
+#  MappingKernelManager (which handles kernel restarts) and the
+#  ZMQChannelsHandler (which handles the startup).
+#c.MappingKernelManager.kernel_info_timeout = 60
+
+##
+#c.MappingKernelManager.root_dir = ''
+
+#------------------------------------------------------------------------------
+# KernelSpecManager(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## If there is no Python kernelspec registered and the IPython kernel is
+#  available, ensure it is added to the spec list.
+#c.KernelSpecManager.ensure_native_kernel = True
+
+## The kernel spec class.  This is configurable to allow subclassing of the
+#  KernelSpecManager for customized behavior.
+#c.KernelSpecManager.kernel_spec_class = 'jupyter_client.kernelspec.KernelSpec'
+
+## Whitelist of allowed kernel names.
+#
+#  By default, all installed kernels are allowed.
+#c.KernelSpecManager.whitelist = set()
+
+#------------------------------------------------------------------------------
+# ContentsManager(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## Base class for serving files and directories.
+#
+#  This serves any text or binary file, as well as directories, with special
+#  handling for JSON notebook documents.
+#
+#  Most APIs take a path argument, which is always an API-style unicode path, and
+#  always refers to a directory.
+#
+#  - unicode, not url-escaped
+#  - '/'-separated
+#  - leading and trailing '/' will be stripped
+#  - if unspecified, path defaults to '',
+#    indicating the root path.
+
+## Allow access to hidden files
+#c.ContentsManager.allow_hidden = False
+
+##
+#c.ContentsManager.checkpoints = None
+
+##
+#c.ContentsManager.checkpoints_class = 'notebook.services.contents.checkpoints.Checkpoints'
+
+##
+#c.ContentsManager.checkpoints_kwargs = {}
+
+## handler class to use when serving raw file requests.
+#
+#  Default is a fallback that talks to the ContentsManager API, which may be
+#  inefficient, especially for large files.
+#
+#  Local files-based ContentsManagers can use a StaticFileHandler subclass, which
+#  will be much more efficient.
+#
+#  Access to these files should be Authenticated.
+#c.ContentsManager.files_handler_class = 'notebook.files.handlers.FilesHandler'
+
+## Extra parameters to pass to files_handler_class.
+#
+#  For example, StaticFileHandlers generally expect a `path` argument specifying
+#  the root directory from which to serve files.
+#c.ContentsManager.files_handler_params = {}
+
+## Glob patterns to hide in file and directory listings.
+#c.ContentsManager.hide_globs = ['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*.so', '*.dylib', '*~']
+
+## Python callable or importstring thereof
+#
+#  To be called on a contents model prior to save.
+#
+#  This can be used to process the structure, such as removing notebook outputs
+#  or other side effects that should not be saved.
+#
+#  It will be called as (all arguments passed by keyword)::
+#
+#      hook(path=path, model=model, contents_manager=self)
+#
+#  - model: the model to be saved. Includes file contents.
+#    Modifying this dict will affect the file that is stored.
+#  - path: the API path of the save destination
+#  - contents_manager: this ContentsManager instance
+#c.ContentsManager.pre_save_hook = None
+
+##
+#c.ContentsManager.root_dir = '/'
+
+## The base name used when creating untitled directories.
+#c.ContentsManager.untitled_directory = 'Untitled Folder'
+
+## The base name used when creating untitled files.
+#c.ContentsManager.untitled_file = 'untitled'
+
+## The base name used when creating untitled notebooks.
+#c.ContentsManager.untitled_notebook = 'Untitled'
+
+#------------------------------------------------------------------------------
+# FileManagerMixin(Configurable) configuration
+#------------------------------------------------------------------------------
+
+## Mixin for ContentsAPI classes that interact with the filesystem.
+#
+#  Provides facilities for reading, writing, and copying both notebooks and
+#  generic files.
+#
+#  Shared by FileContentsManager and FileCheckpoints.
+#
+#  Note ---- Classes using this mixin must provide the following attributes:
+#
+#  root_dir : unicode
+#      A directory against against which API-style paths are to be resolved.
+#
+#  log : logging.Logger
+
+## By default notebooks are saved on disk on a temporary file and then if
+#  successfully written, it replaces the old ones. This procedure, namely
+#  'atomic_writing', causes some bugs on file system without operation order
+#  enforcement (like some networked fs). If set to False, the new notebook is
+#  written directly on the old one which could fail (eg: full filesystem or quota
+#  )
+#c.FileManagerMixin.use_atomic_writing = True
+
+#------------------------------------------------------------------------------
+# FileContentsManager(FileManagerMixin,ContentsManager) configuration
+#------------------------------------------------------------------------------
+
+## If True (default), deleting files will send them to the platform's
+#  trash/recycle bin, where they can be recovered. If False, deleting files
+#  really deletes them.
+#c.FileContentsManager.delete_to_trash = True
+
+## Python callable or importstring thereof
+#
+#  to be called on the path of a file just saved.
+#
+#  This can be used to process the file on disk, such as converting the notebook
+#  to a script or HTML via nbconvert.
+#
+#  It will be called as (all arguments passed by keyword)::
+#
+#      hook(os_path=os_path, model=model, contents_manager=instance)
+#
+#  - path: the filesystem path to the file just written - model: the model
+#  representing the file - contents_manager: this ContentsManager instance
+#c.FileContentsManager.post_save_hook = None
+
+##
+#c.FileContentsManager.root_dir = ''
+
+## DEPRECATED, use post_save_hook. Will be removed in Notebook 5.0
+#c.FileContentsManager.save_script = False
+
+#------------------------------------------------------------------------------
+# NotebookNotary(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## A class for computing and verifying notebook signatures.
+
+## The hashing algorithm used to sign notebooks.
+#c.NotebookNotary.algorithm = 'sha256'
+
+## The sqlite file in which to store notebook signatures. By default, this will
+#  be in your Jupyter data directory. You can set it to ':memory:' to disable
+#  sqlite writing to the filesystem.
+#c.NotebookNotary.db_file = ''
+
+## The secret key with which notebooks are signed.
+#c.NotebookNotary.secret = b''
+
+## The file where the secret key is stored.
+#c.NotebookNotary.secret_file = ''
+
+## A callable returning the storage backend for notebook signatures. The default
+#  uses an SQLite database.
+#c.NotebookNotary.store_factory = traitlets.Undefined
+
+#------------------------------------------------------------------------------
+# GatewayKernelManager(MappingKernelManager) configuration
+#------------------------------------------------------------------------------
+
+## Kernel manager that supports remote kernels hosted by Jupyter Kernel or
+#  Enterprise Gateway.
+
+#------------------------------------------------------------------------------
+# GatewayKernelSpecManager(KernelSpecManager) configuration
+#------------------------------------------------------------------------------
+
+#------------------------------------------------------------------------------
+# GatewayClient(SingletonConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## This class manages the configuration.  It's its own singleton class so that we
+#  can share these values across all objects.  It also contains some helper methods
+#   to build request arguments out of the various config options.
+
+## The authorization token used in the HTTP headers.  (JUPYTER_GATEWAY_AUTH_TOKEN
+#  env var)
+#c.GatewayClient.auth_token = None
+
+## The filename of CA certificates or None to use defaults.
+#  (JUPYTER_GATEWAY_CA_CERTS env var)
+#c.GatewayClient.ca_certs = None
+
+## The filename for client SSL certificate, if any.  (JUPYTER_GATEWAY_CLIENT_CERT
+#  env var)
+#c.GatewayClient.client_cert = None
+
+## The filename for client SSL key, if any.  (JUPYTER_GATEWAY_CLIENT_KEY env var)
+#c.GatewayClient.client_key = None
+
+## The time allowed for HTTP connection establishment with the Gateway server.
+#  (JUPYTER_GATEWAY_CONNECT_TIMEOUT env var)
+#c.GatewayClient.connect_timeout = 60.0
+
+## A comma-separated list of environment variable names that will be included,
+#  along with their values, in the kernel startup request.  The corresponding
+#  `env_whitelist` configuration value must also be set on the Gateway server -
+#  since that configuration value indicates which environmental values to make
+#  available to the kernel. (JUPYTER_GATEWAY_ENV_WHITELIST env var)
+#c.GatewayClient.env_whitelist = ''
+
+## Additional HTTP headers to pass on the request.  This value will be converted
+#  to a dict. (JUPYTER_GATEWAY_HEADERS env var)
+#c.GatewayClient.headers = '{}'
+
+## The password for HTTP authentication.  (JUPYTER_GATEWAY_HTTP_PWD env var)
+#c.GatewayClient.http_pwd = None
+
+## The username for HTTP authentication. (JUPYTER_GATEWAY_HTTP_USER env var)
+#c.GatewayClient.http_user = None
+
+## The gateway API endpoint for accessing kernel resources
+#  (JUPYTER_GATEWAY_KERNELS_ENDPOINT env var)
+#c.GatewayClient.kernels_endpoint = '/api/kernels'
+
+## The gateway API endpoint for accessing kernelspecs
+#  (JUPYTER_GATEWAY_KERNELSPECS_ENDPOINT env var)
+#c.GatewayClient.kernelspecs_endpoint = '/api/kernelspecs'
+
+## The gateway endpoint for accessing kernelspecs resources
+#  (JUPYTER_GATEWAY_KERNELSPECS_RESOURCE_ENDPOINT env var)
+#c.GatewayClient.kernelspecs_resource_endpoint = '/kernelspecs'
+
+## The time allowed for HTTP request completion. (JUPYTER_GATEWAY_REQUEST_TIMEOUT
+#  env var)
+#c.GatewayClient.request_timeout = 60.0
+
+## The url of the Kernel or Enterprise Gateway server where kernel specifications
+#  are defined and kernel management takes place. If defined, this Notebook
+#  server acts as a proxy for all kernel management and kernel specification
+#  retrieval.  (JUPYTER_GATEWAY_URL env var)
+#c.GatewayClient.url = None
+
+## For HTTPS requests, determines if server's certificate should be validated or
+#  not. (JUPYTER_GATEWAY_VALIDATE_CERT env var)
+#c.GatewayClient.validate_cert = True
+
+## The websocket url of the Kernel or Enterprise Gateway server.  If not
+#  provided, this value will correspond to the value of the Gateway url with 'ws'
+#  in place of 'http'.  (JUPYTER_GATEWAY_WS_URL env var)
+#c.GatewayClient.ws_url = None
diff --git a/var/lib/coral-jupyter-server/example.ipynb b/var/lib/coral-jupyter-server/example.ipynb
new file mode 100644
index 0000000..a687e98
--- /dev/null
+++ b/var/lib/coral-jupyter-server/example.ipynb
@@ -0,0 +1 @@
+# ipynb notebooks will live here as soon as I port some examples :)
\ No newline at end of file