blob: 63aff315b7c53f4a8a9d1dfa3ed59ea71b896186 [file] [log] [blame]
/* vi: set sw=8 ts=8: */
/*
* This file suffers from chronically incorrect tabification
* of messages. Before editing this file:
* 1. Switch you editor to 8-space tab mode.
* 2. Do not use \t in messages, use real tab character.
* 3. Start each source line with message as follows:
* |<7 spaces>"text with tabs"....
* or
* |<5 spaces>"\ntext with tabs"....
*/
#ifndef __BB_USAGE_H__
#define __BB_USAGE_H__
#define NOUSAGE_STR "\b"
#define addgroup_trivial_usage \
"[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name"
#define addgroup_full_usage "\n\n" \
"Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \
"\nOptions:" \
"\n -g GID Group id" \
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage "\n\n" \
"Add an user\n" \
"\nOptions:" \
"\n -h DIR Home directory" \
"\n -g GECOS GECOS field" \
"\n -s SHELL Login shell" \
"\n -G GROUP Add user to existing group" \
"\n -S Create a system user" \
"\n -D Do not assign a password" \
"\n -H Do not create home directory" \
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage "\n\n" \
"Read and optionally set system timebase parameters. See adjtimex(2).\n" \
"\nOptions:" \
"\n -q Quiet" \
"\n -o offset Time offset, microseconds" \
"\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \
"\n (positive values make clock run faster)" \
"\n -t tick Microseconds per tick, usually 10000" \
"\n -p timeconstant" \
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage "\n\n" \
"Extract or list FILES from an ar archive\n" \
"\nOptions:" \
"\n -o Preserve original dates" \
"\n -p Extract to stdout" \
"\n -t List" \
"\n -x Extract" \
"\n -v Verbose" \
#define arp_trivial_usage \
"\n" \
"[-vn] [-H type] [-i if] -a [hostname]\n" \
"[-v] [-i if] -d hostname [pub]\n" \
"[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
"[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
"[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
#define arp_full_usage "\n\n" \
"Manipulate ARP cache\n" \
"\nOptions:" \
"\n -a Display (all) hosts" \
"\n -s Set new ARP entry" \
"\n -d Delete a specified entry" \
"\n -v Verbose" \
"\n -n Don't resolve names" \
"\n -i IF Network interface" \
"\n -D Read <hwaddr> from given device" \
"\n -A, -p AF Protocol family" \
"\n -H HWTYPE Hardware address type" \
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
#define arping_full_usage "\n\n" \
"Send ARP requests/replies\n" \
"\nOptions:" \
"\n -f Quit on first ARP reply" \
"\n -q Quiet" \
"\n -b Keep broadcasting, don't go unicast" \
"\n -D Duplicated address detection mode" \
"\n -U Unsolicited ARP mode, update your neighbors" \
"\n -A ARP answer mode, update your neighbors" \
"\n -c N Stop after sending N ARP requests" \
"\n -w timeout Time to wait for ARP reply, in seconds" \
"\n -I dev Interface to use (default eth0)" \
"\n -s sender Sender IP address" \
"\n target Target IP address" \
#define sh_trivial_usage NOUSAGE_STR
#define sh_full_usage ""
#define ash_trivial_usage NOUSAGE_STR
#define ash_full_usage ""
#define hush_trivial_usage NOUSAGE_STR
#define hush_full_usage ""
#define msh_trivial_usage NOUSAGE_STR
#define msh_full_usage ""
#define awk_trivial_usage \
"[OPTION]... [program-text] [FILE...]"
#define awk_full_usage "\n\n" \
"Options:" \
"\n -v var=val Set variable" \
"\n -F sep Use sep as field separator" \
"\n -f file Read program from file" \
#define basename_trivial_usage \
"FILE [SUFFIX]"
#define basename_full_usage "\n\n" \
"Strip directory path and suffixes from FILE.\n" \
"If specified, also remove any trailing SUFFIX."
#define basename_example_usage \
"$ basename /usr/local/bin/foo\n" \
"foo\n" \
"$ basename /usr/local/bin/\n" \
"bin\n" \
"$ basename /foo/bar.txt .txt\n" \
"bar"
#define fbsplash_trivial_usage \
"-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
#define fbsplash_full_usage "\n\n" \
"Options:\n" \
"\n -s Image" \
"\n -c Hide cursor" \
"\n -d Framebuffer device (default /dev/fb0)" \
"\n -i Config file (var=value):" \
"\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
"\n BAR_R,BAR_G,BAR_B" \
"\n -f Control pipe (else exit after drawing image)" \
"\n commands: 'NN' (% for progress bar) or 'exit'" \
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
#define brctl_full_usage "\n\n" \
"Manage ethernet bridges.\n" \
"\nCommands:" \
USE_FEATURE_BRCTL_SHOW( \
"\n show Show a list of bridges" \
) \
"\n addbr BRIDGE Create BRIDGE" \
"\n delbr BRIDGE Delete BRIDGE" \
"\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
"\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
USE_FEATURE_BRCTL_FANCY( \
"\n setageing BRIDGE TIME Set ageing time" \
"\n setfd BRIDGE TIME Set bridge forward delay" \
"\n sethello BRIDGE TIME Set hello time" \
"\n setmaxage BRIDGE TIME Set max message age" \
"\n setpathcost BRIDGE COST Set path cost" \
"\n setportprio BRIDGE PRIO Set port priority" \
"\n setbridgeprio BRIDGE PRIO Set bridge priority" \
"\n stp BRIDGE [1|0] STP on/off" \
) \
#define bunzip2_trivial_usage \
"[OPTION]... [FILE]"
#define bunzip2_full_usage "\n\n" \
"Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -f Force" \
#define bzip2_trivial_usage \
"[OPTION]... [FILE]..."
#define bzip2_full_usage "\n\n" \
"Compress FILE(s) with bzip2 algorithm.\n" \
"When FILE is '-' or unspecified, reads standard input. Implies -c.\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -d Decompress" \
"\n -f Force" \
"\n -1..-9 Compression level" \
#define busybox_notes_usage \
"Hello world!\n"
#define bzcat_trivial_usage \
"FILE"
#define bzcat_full_usage "\n\n" \
"Uncompress to stdout"
#define unlzma_trivial_usage \
"[OPTION]... [FILE]"
#define unlzma_full_usage "\n\n" \
"Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -f Force" \
#define lzmacat_trivial_usage \
"FILE"
#define lzmacat_full_usage "\n\n" \
"Uncompress to stdout"
#define cal_trivial_usage \
"[-jy] [[month] year]"
#define cal_full_usage "\n\n" \
"Display a calendar\n" \
"\nOptions:" \
"\n -j Use julian dates" \
"\n -y Display the entire year" \
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage "\n\n" \
"Concatenate FILE(s) and print them to stdout\n" \
"\nOptions:" \
"\n -u Use unbuffered i/o (ignored)" \
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
#define catv_trivial_usage \
"[-etv] [FILE]..."
#define catv_full_usage "\n\n" \
"Display nonprinting characters as ^x or M-x\n" \
"\nOptions:" \
"\n -e End each line with $" \
"\n -t Show tabs as ^I" \
"\n -v Don't use ^x or M-x escapes" \
#define chat_trivial_usage \
"EXPECT [SEND [EXPECT [SEND...]]]"
#define chat_full_usage "\n\n" \
"Useful for interacting with a modem connected to stdin/stdout.\n" \
"A script consists of one or more \"expect-send\" pairs of strings,\n" \
"each pair is a pair of arguments. Example:\n" \
"chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage "\n\n" \
"Change file attributes on an ext2 fs\n" \
"\nModifiers:" \
"\n - Remove attributes" \
"\n + Add attributes" \
"\n = Set attributes" \
"\nAttributes:" \
"\n A Don't track atime" \
"\n a Append mode only" \
"\n c Enable compress" \
"\n D Write dir contents synchronously" \
"\n d Do not backup with dump" \
"\n i Cannot be modified (immutable)" \
"\n j Write all data to journal first" \
"\n s Zero disk storage when deleted" \
"\n S Write file contents synchronously" \
"\n t Disable tail-merging of partial blocks with other files" \
"\n u Allow file to be undeleted" \
"\nOptions:" \
"\n -R Recursively list subdirectories" \
"\n -v Set the file's version/generation number" \
#define chcon_trivial_usage \
"[OPTIONS] CONTEXT FILE..." \
"\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
USE_FEATURE_CHCON_LONG_OPTIONS( \
"\n chcon [OPTIONS] --reference=RFILE FILE..." \
)
#define chcon_full_usage "\n\n" \
"Change the security context of each FILE to CONTEXT\n" \
USE_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -c,--changes Report changes made" \
"\n -h,--no-dereference Affect symlinks instead of their targets" \
"\n -f,--silent,--quiet Suppress most error messages" \
"\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
"\n -u,--user=USER Set user/role/type/range in the target" \
"\n -r,--role=ROLE security context" \
"\n -t,--type=TYPE" \
"\n -l,--range=RANGE" \
"\n -R,--recursive Recurse subdirectories" \
) \
SKIP_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -c Report changes made" \
"\n -h Affect symlinks instead of their targets" \
"\n -f Suppress most error messages" \
"\n -u USER Set user/role/type/range in the target security context" \
"\n -r ROLE" \
"\n -t TYPE" \
"\n -l RNG" \
"\n -R Recurse subdirectories" \
)
#define chmod_trivial_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage "\n\n" \
"Each MODE is one or more of the letters ugoa, one of the\n" \
"symbols +-= and one or more of the letters rwxst\n" \
"\nOptions:" \
"\n -R Recurse directories" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
)
#define chmod_example_usage \
"$ ls -l /tmp/foo\n" \
"-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
"$ chmod u+x /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
"$ chmod 444 /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chgrp_trivial_usage \
"[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage "\n\n" \
"Change the group membership of each FILE to GROUP\n" \
"\nOptions:" \
"\n -R Recurse directories" \
"\n -h Affect symlinks instead of symlink targets" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v Verbose" \
"\n -f Hide errors" \
)
#define chgrp_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chgrp root /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
#define chown_trivial_usage \
"[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage "\n\n" \
"Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
"\nOptions:" \
"\n -R Recurse directories" \
"\n -h Affect symlinks instead of symlink targets" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
)
#define chown_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chown root /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chown root.root /tmp/foo\n" \
"ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chpst_trivial_usage \
"[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
" [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
" [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
#define chpst_full_usage "\n\n" \
"Change the process state and run PROG\n" \
"\nOptions:" \
"\n -u USER[:GRP] Set uid and gid" \
"\n -U USER[:GRP] Set $UID and $GID in environment" \
"\n -e DIR Set environment variables as specified by files" \
"\n in DIR: file=1st_line_of_file" \
"\n -/ DIR Chroot to DIR" \
"\n -n NICE Add NICE to nice value" \
"\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
"\n -d BYTES Limit data segment" \
"\n -o N Limit number of open files per process" \
"\n -p N Limit number of processes per uid" \
"\n -f BYTES Limit output file sizes" \
"\n -c BYTES Limit core file size" \
"\n -v Verbose" \
"\n -P Create new process group" \
"\n -0 Close standard input" \
"\n -1 Close standard output" \
"\n -2 Close standard error" \
#define setuidgid_trivial_usage \
"account prog args"
#define setuidgid_full_usage "\n\n" \
"Set uid and gid to account's uid and gid, removing all supplementary\n" \
"groups and run PROG"
#define envuidgid_trivial_usage \
"account prog args"
#define envuidgid_full_usage "\n\n" \
"Set $UID to account's uid and $GID to account's gid and run PROG"
#define envdir_trivial_usage \
"dir prog args"
#define envdir_full_usage "\n\n" \
"Set various environment variables as specified by files\n" \
"in the directory dir and run PROG"
#define softlimit_trivial_usage \
"[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
" [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
" PROG ARGS"
#define softlimit_full_usage "\n\n" \
"Set soft resource limits, then run PROG\n" \
"\nOptions:" \
"\n -a BYTES Limit total size of all segments" \
"\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
"\n -d BYTES Limit data segment" \
"\n -s BYTES Limit stack segment" \
"\n -l BYTES Limit locked memory size" \
"\n -o N Limit number of open files per process" \
"\n -p N Limit number of processes per uid" \
"\nOptions controlling file sizes:" \
"\n -f BYTES Limit output file sizes" \
"\n -c BYTES Limit core file size" \
"\nEfficiency opts:" \
"\n -r BYTES Limit resident set size" \
"\n -t N Limit CPU time, process receives" \
"\n a SIGXCPU after N seconds" \
#define chroot_trivial_usage \
"NEWROOT [COMMAND...]"
#define chroot_full_usage "\n\n" \
"Run COMMAND with root directory set to NEWROOT"
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
"# mount /dev/hdc1 /mnt -t minix\n" \
"# chroot /mnt\n" \
"# ls -l /bin/ls\n" \
"-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
"N"
#define chvt_full_usage "\n\n" \
"Change the foreground virtual terminal to /dev/ttyN"
#define cksum_trivial_usage \
"FILES..."
#define cksum_full_usage "\n\n" \
"Calculate the CRC32 checksums of FILES"
#define clear_trivial_usage \
""
#define clear_full_usage "\n\n" \
"Clear screen"
#define cmp_trivial_usage \
"[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
#define cmp_full_usage "\n\n" \
"Compares FILE1 vs stdin if FILE2 is not specified\n" \
"\nOptions:" \
"\n -l Write the byte numbers (decimal) and values (octal)" \
"\n for all differing bytes" \
"\n -s Quiet" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage "\n\n" \
"Compare FILE1 to FILE2, or to stdin if - is specified\n" \
"\nOptions:" \
"\n -1 Suppress lines unique to FILE1" \
"\n -2 Suppress lines unique to FILE2" \
"\n -3 Suppress lines common to both files" \
#define bbconfig_trivial_usage \
""
#define bbconfig_full_usage "\n\n" \
"Print the config file which built busybox"
#define bbsh_trivial_usage \
"[FILE]...\n" \
"or: bbsh -c command [args]..."
#define bbsh_full_usage "\n\n" \
"The bbsh shell (command interpreter)"
#define chrt_trivial_usage \
"[OPTION]... [prio] [pid | command [arg]...]"
#define chrt_full_usage "\n\n" \
"Manipulate real-time attributes of a process\n" \
"\nOptions:" \
"\n -p Operate on pid" \
"\n -r Set scheduling policy to SCHED_RR" \
"\n -f Set scheduling policy to SCHED_FIFO" \
"\n -o Set scheduling policy to SCHED_OTHER" \
"\n -m Show min and max priorities" \
#define chrt_example_usage \
"$ chrt -r 4 sleep 900; x=$!\n" \
"$ chrt -f -p 3 $x\n" \
"You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
#define cp_full_usage "\n\n" \
"Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -a Same as -dpR" \
USE_SELINUX( \
"\n -c Preserve security context" \
) \
"\n -d,-P Preserve links" \
"\n -H,-L Dereference all symlinks (default)" \
"\n -p Preserve file attributes if possible" \
"\n -f Force overwrite" \
"\n -i Prompt before overwrite" \
"\n -R,-r Recurse directories" \
"\n -l,-s Create (sym)links" \
#define cpio_trivial_usage \
"-[dim" USE_FEATURE_CPIO_O("o") "tuv][F cpiofile]" \
USE_FEATURE_CPIO_O( "[H newc]" )
#define cpio_full_usage "\n\n" \
"Extract or list files from a cpio archive" \
USE_FEATURE_CPIO_O( ", or create a cpio archive" ) \
"\n" \
"Main operation mode:" \
"\n d Make leading directories" \
"\n i Extract" \
"\n m Preserve mtime" \
USE_FEATURE_CPIO_O( \
"\n o Create" \
"\n H newc Define format" \
) \
"\n t List" \
"\n v Verbose" \
"\n u Unconditional overwrite" \
"\n F Input from file" \
#define crond_trivial_usage \
"-fbS -l N " USE_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
#define crond_full_usage "\n\n" \
" -f Foreground" \
"\n -b Background (default)" \
"\n -S Log to syslog (default)" \
"\n -l Set log level. 0 is the most verbose, default 8" \
USE_FEATURE_CROND_D( \
"\n -d Set log level, log to stderr" \
) \
"\n -L Log to file" \
"\n -c Working dir" \
#define crontab_trivial_usage \
"[-c DIR] [-u USER] [-ler]|[FILE]"
#define crontab_full_usage "\n\n" \
" -c Crontab directory" \
"\n -u User" \
"\n -l List crontab" \
"\n -e Edit crontab" \
"\n -r Delete crontab" \
"\n FILE Replace crontab by FILE ('-': stdin)" \
#define cryptpw_trivial_usage \
"[-a des|md5] [string]"
#define cryptpw_full_usage "\n\n" \
"Output crypted string.\n" \
"If string isn't supplied on cmdline, read it from stdin.\n" \
"\nOptions:" \
"\n -a Algorithm to use (default: md5)" \
#define cttyhack_trivial_usage NOUSAGE_STR
#define cttyhack_full_usage ""
#define cut_trivial_usage \
"[OPTION]... [FILE]..."
#define cut_full_usage "\n\n" \
"Print selected fields from each input FILE to standard output\n" \
"\nOptions:" \
"\n -b LIST Output only bytes from LIST" \
"\n -c LIST Output only characters from LIST" \
"\n -d CHAR Use CHAR instead of tab as the field delimiter" \
"\n -s Output only the lines containing delimiter" \
"\n -f N Print only these fields" \
"\n -n Ignored" \
#define cut_example_usage \
"$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
"Hello\n" \
"$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
"world\n"
#define date_trivial_usage \
"[OPTION]... [+FMT] [TIME]"
#define date_full_usage "\n\n" \
"Display time (using +FMT), or set time\n" \
"\nOptions:" \
"\n -u Work in UTC (don't convert to local time)" \
"\n -R Output RFC-822 compliant date string" \
USE_FEATURE_DATE_ISOFMT( \
"\n -I[SPEC] Output ISO-8601 compliant date string" \
"\n SPEC='date' (default) for date only," \
"\n 'hours', 'minutes', or 'seconds' for date and" \
"\n time to the indicated precision" \
) \
"\n -d TIME Display TIME, not 'now'" \
"\n -r FILE Display last modification time of FILE" \
"\n [-s] TIME Set time to TIME" \
USE_FEATURE_DATE_ISOFMT( \
"\n -D FMT Use FMT for str->date conversion" \
) \
"\n" \
"\nRecognized formats for TIME:" \
"\n hh:mm[:ss]" \
"\n [YYYY.]MM.DD-hh:mm[:ss]" \
"\n YYYY-MM-DD hh:mm[:ss]" \
"\n MMDDhhmm[[YY]YY][.ss]" \
#define date_example_usage \
"$ date\n" \
"Wed Apr 12 18:52:41 MDT 2000\n"
#define dc_trivial_usage \
"expression..."
#define dc_full_usage "\n\n" \
"Tiny RPN calculator. Operations:\n" \
"+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
"p - print top of the stack (without altering the stack),\n" \
"f - print entire stack, o - pop the value and set output radix\n" \
"(value must be 10 or 16).\n" \
"Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \
#define dc_example_usage \
"$ dc 2 2 + p\n" \
"4\n" \
"$ dc 8 8 \\* 2 2 + / p\n" \
"16\n" \
"$ dc 0 1 and p\n" \
"0\n" \
"$ dc 0 1 or p\n" \
"1\n" \
"$ echo 72 9 div 8 mul p | dc\n" \
"64\n"
#define dd_trivial_usage \
"[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
" [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
#define dd_full_usage "\n\n" \
"Copy a file with converting and formatting\n" \
"\nOptions:" \
"\n if=FILE Read from FILE instead of stdin" \
"\n of=FILE Write to FILE instead of stdout" \
"\n bs=N Read and write N bytes at a time" \
USE_FEATURE_DD_IBS_OBS( \
"\n ibs=N Read N bytes at a time" \
) \
USE_FEATURE_DD_IBS_OBS( \
"\n obs=N Write N bytes at a time" \
) \
"\n count=N Copy only N input blocks" \
"\n skip=N Skip N input blocks" \
"\n seek=N Skip N output blocks" \
USE_FEATURE_DD_IBS_OBS( \
"\n conv=notrunc Don't truncate output file" \
"\n conv=noerror Continue after read errors" \
"\n conv=sync Pad blocks with zeros" \
"\n conv=fsync Physically write data out before finishing" \
) \
"\n" \
"\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
"\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
#define dd_example_usage \
"$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
"4+0 records in\n" \
"4+0 records out\n"
#define deallocvt_trivial_usage \
"[N]"
#define deallocvt_full_usage "\n\n" \
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
#define delgroup_full_usage "\n\n" \
"Delete group GROUP from the system" \
USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
#define deluser_full_usage "\n\n" \
"Delete USER from the system"
#define depmod_trivial_usage NOUSAGE_STR
#define depmod_full_usage ""
#define devmem_trivial_usage \
"ADDRESS [WIDTH [VALUE]]"
#define devmem_full_usage "\n\n" \
"Read/write from physical address\n" \
"\n ADDRESS Address to act upon" \
"\n WIDTH Width (8/16/...)" \
"\n VALUE Data to be written" \
#define devfsd_trivial_usage \
"mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]")
#define devfsd_full_usage "\n\n" \
"Manage devfs permissions and old device name symlinks\n" \
"\nOptions:" \
"\n mntpnt The mount point where devfs is mounted" \
"\n -v Print the protocol version numbers for devfsd" \
"\n and the kernel-side protocol version and exit" \
USE_DEVFSD_FG_NP( \
"\n -fg Run in foreground" \
"\n -np Exit after parsing the configuration file" \
"\n and processing synthetic REGISTER events," \
"\n do not poll for events" \
)
#define df_trivial_usage \
"[-Pk" \
USE_FEATURE_HUMAN_READABLE("mh") \
USE_FEATURE_DF_FANCY("ai] [-B SIZE") \
"] [FILESYSTEM...]"
#define df_full_usage "\n\n" \
"Print filesystem usage statistics\n" \
"\nOptions:" \
"\n -P POSIX output format" \
"\n -k 1024-byte blocks (default)" \
USE_FEATURE_HUMAN_READABLE( \
"\n -m 1M-byte blocks" \
"\n -h Human readable (e.g. 1K 243M 2G)" \
) \
USE_FEATURE_DF_FANCY( \
"\n -a Show all filesystems" \
"\n -i Inodes" \
"\n -B SIZE Blocksize" \
) \
#define df_example_usage \
"$ df\n" \
"Filesystem 1K-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n" \
"/dev/sda1 64216 36364 27852 57% /boot\n" \
"$ df /dev/sda3\n" \
"Filesystem 1K-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n" \
"$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
"Filesystem 512B-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 17381728 17107080 274648 98% /\n" \
"$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
"Filesystem 512-blocks Used Available Capacity Mounted on\n" \
"/dev/sda3 17381728 17107080 274648 98% /\n"
#define dhcprelay_trivial_usage \
"[client1,client2,...] [server_device]"
#define dhcprelay_full_usage "\n\n" \
"Relay dhcp requests from client devices to server device.\n" \
"Pass clients as CSV"
#define diff_trivial_usage \
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage "\n\n" \
"Compare files line by line and output the differences between them.\n" \
"This implementation supports unified diffs only.\n" \
"\nOptions:" \
"\n -a Treat all files as text" \
"\n -b Ignore changes in the amount of whitespace" \
"\n -d Try hard to find a smaller set of changes" \
"\n -i Ignore case differences" \
"\n -L Use LABEL instead of the filename in the unified header" \
"\n -N Treat absent files as empty" \
"\n -q Output only whether files differ" \
"\n -r Recursively compare subdirectories" \
"\n -S Start with FILE when comparing directories" \
"\n -T Make tabs line up by prefixing a tab when necessary" \
"\n -s Report when two files are the same" \
"\n -t Expand tabs to spaces in output" \
"\n -U Output LINES lines of context" \
"\n -w Ignore all whitespace" \
#define dirname_trivial_usage \
"FILENAME"
#define dirname_full_usage "\n\n" \
"Strip non-directory suffix from FILENAME"
#define dirname_example_usage \
"$ dirname /tmp/foo\n" \
"/tmp\n" \
"$ dirname /tmp/foo/\n" \
"/tmp\n"
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage "\n\n" \
"Print or control the kernel ring buffer\n" \
"\nOptions:" \
"\n -c Clear ring buffer after printing" \
"\n -n LEVEL Set console logging level" \
"\n -s SIZE Buffer size" \
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage "\n\n" \
"Small static DNS server daemon\n" \
"\nOptions:" \
"\n -c Config filename" \
"\n -t TTL in seconds" \
"\n -p Listening port" \
"\n -i Listening ip (default all)" \
"\n -d Daemonize" \
#define dos2unix_trivial_usage \
"[option] [FILE]"
#define dos2unix_full_usage "\n\n" \
"Convert FILE from dos to unix format.\n" \
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
"\n -d unix2dos" \
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
#define dpkg_full_usage "\n\n" \
"Install, remove and manage Debian packages\n" \
"\nOptions:" \
"\n -i Install the package" \
"\n -l List of installed packages" \
"\n -C Configure an unpackaged package" \
"\n -F depends Ignore dependency problems" \
"\n -P Purge all files of a package" \
"\n -r Remove all but the configuration files for a package" \
"\n -u Unpack a package, but don't configure it" \
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage "\n\n" \
"Perform actions on Debian packages (.debs)\n" \
"\nOptions:" \
"\n -c List contents of filesystem tree" \
"\n -e Extract control files to [argument] directory" \
"\n -f Display control field name starting with [argument]" \
"\n -x Extract packages filesystem tree to directory" \
"\n -X Verbose extract" \
#define dpkg_deb_example_usage \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
#define du_trivial_usage \
"[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
#define du_full_usage "\n\n" \
"Summarize disk space used for each FILE and/or directory.\n" \
"Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
" bytes.\n" \
"\nOptions:" \
"\n -a Show file sizes too" \
"\n -H Follow symlinks on command line" \
"\n -L Follow all symlinks" \
"\n -d N Limit output to directories (and files with -a) of depth < N" \
"\n -c Show grand total" \
"\n -l Count sizes many times if hard linked" \
"\n -s Display only a total for each argument" \
"\n -x Skip directories on different filesystems" \
USE_FEATURE_HUMAN_READABLE( \
"\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
"\n -m Sizes in megabytes" \
) \
"\n -k Sizes in kilobytes" \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
#define du_example_usage \
"$ du\n" \
"16 ./CVS\n" \
"12 ./kernel-patches/CVS\n" \
"80 ./kernel-patches\n" \
"12 ./tests/CVS\n" \
"36 ./tests\n" \
"12 ./scripts/CVS\n" \
"16 ./scripts\n" \
"12 ./docs/CVS\n" \
"104 ./docs\n" \
"2417 .\n"
#define dumpkmap_trivial_usage \
"> keymap"
#define dumpkmap_full_usage "\n\n" \
"Print a binary keyboard translation table to standard output"
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage "\n\n" \
"Display DHCP leases granted by udhcpd\n" \
"\nOptions:" \
USE_GETOPT_LONG( \
"\n -f,--file=FILE Leases file to load" \
"\n -r,--remaining Interpret lease times as time remaining" \
"\n -a,--absolute Interpret lease times as expire time" \
) \
SKIP_GETOPT_LONG( \
"\n -f FILE Leases file to load" \
"\n -r Interpret lease times as time remaining" \
"\n -a Interpret lease times as expire time" \
)
#define e2fsck_trivial_usage \
"[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
"[-I inode_buffer_blocks] [-P process_inode_size] " \
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage "\n\n" \
"Check ext2/ext3 file system\n" \
"\nOptions:" \
"\n -p Automatic repair (no questions)" \
"\n -n Make no changes to the filesystem" \
"\n -y Assume 'yes' to all questions" \
"\n -c Check for bad blocks and add them to the badblock list" \
"\n -f Force checking even if filesystem is marked clean" \
"\n -v Verbose" \
"\n -b superblock Use alternative superblock" \
"\n -B blocksize Force blocksize when looking for superblock" \
"\n -j journal Set location of the external journal" \
"\n -l file Add to badblocks list" \
"\n -L file Set badblocks list" \
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
#define echo_full_usage "\n\n" \
"Print the specified ARGs to stdout" \
USE_FEATURE_FANCY_ECHO( "\n" \
"\nOptions:" \
"\n -n Suppress trailing newline" \
"\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
"\n -E Disable interpretation of backslash-escaped characters" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
"Erik is cool\n" \
USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
"$ echo \"Erik\\nis\\ncool\"\n" \
"Erik\\nis\\ncool\n")
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
#define eject_full_usage "\n\n" \
"Eject specified DEVICE (or default /dev/cdrom)\n" \
"\nOptions:" \
USE_FEATURE_EJECT_SCSI( \
"\n -s SCSI device" \
) \
"\n -t Close tray" \
"\n -T Open/close tray (toggle)" \
#define ed_trivial_usage ""
#define ed_full_usage ""
#define env_trivial_usage \
"[-iu] [-] [name=value]... [command]"
#define env_full_usage "\n\n" \
"Print the current environment or run a program after setting\n" \
"up the specified environment\n" \
"\nOptions:" \
"\n -, -i Start with an empty environment" \
"\n -u Remove variable from the environment" \
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage "\n\n" \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
"a hostname with a known 'ethers' entry.\n" \
"\nOptions:" \
"\n -b Send wake-up packet to the broadcast address" \
"\n -i iface Interface to use (default eth0)" \
"\n -p pass Append four or six byte password PW to the packet" \
#define expand_trivial_usage \
"[-i] [-t NUM] [FILE|-]"
#define expand_full_usage "\n\n" \
"Convert tabs to spaces, writing to standard output.\n" \
"\nOptions:" \
USE_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i,--initial Do not convert tabs after non blanks" \
"\n -t,--tabs=N Tabstops every N chars" \
) \
SKIP_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i Do not convert tabs after non blanks" \
"\n -t Tabstops every N chars" \
)
#define expr_trivial_usage \
"EXPRESSION"
#define expr_full_usage "\n\n" \
"Print the value of EXPRESSION to standard output.\n" \
"\n" \
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
" ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
" ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
" ARG1 <= ARG2\n" \
" ARG1 = ARG2\n" \
" ARG1 != ARG2\n" \
" ARG1 >= ARG2\n" \
" ARG1 > ARG2\n" \
" ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
" ARG1 - ARG2\n" \
" ARG1 * ARG2\n" \
" ARG1 / ARG2\n" \
" ARG1 % ARG2\n" \
" STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
" match STRING REGEXP Same as STRING : REGEXP\n" \
" substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
" index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
" length STRING Length of STRING\n" \
" quote TOKEN Interpret TOKEN as a string, even if\n" \
" it is a keyword like 'match' or an\n" \
" operator like '/'\n" \
" (EXPRESSION) Value of EXPRESSION\n" \
"\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
"\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
"of characters matched or 0."
#define fakeidentd_trivial_usage \
"[-fiw] [-b ADDR] [STRING]"
#define fakeidentd_full_usage "\n\n" \
"Provide fake ident (auth) service\n" \
"\nOptions:" \
"\n -f Run in foreground" \
"\n -i Inetd mode" \
"\n -w Inetd 'wait' mode" \
"\n -b ADDR Bind to specified address" \
"\n STRING Ident answer string (default is 'nobody')" \
#define false_trivial_usage \
""
#define false_full_usage "\n\n" \
"Return an exit code of FALSE (1)"
#define false_example_usage \
"$ false\n" \
"$ echo $?\n" \
"1\n"
#define fbset_trivial_usage \
"[options] [mode]"
#define fbset_full_usage "\n\n" \
"Show and modify frame buffer settings"
#define fbset_example_usage \
"$ fbset\n" \
"mode \"1024x768-76\"\n" \
" # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
" geometry 1024 768 1024 768 16\n" \
" timings 12714 128 32 16 4 128 4\n" \
" accel false\n" \
" rgba 5/11,6/5,5/0,0/0\n" \
"endmode\n"
#define fdflush_trivial_usage \
"DEVICE"
#define fdflush_full_usage "\n\n" \
"Force floppy disk drive to detect disk change"
#define fdformat_trivial_usage \
"[-n] DEVICE"
#define fdformat_full_usage "\n\n" \
"Format floppy disk\n" \
"\nOptions:" \
"\n -n Don't verify after format" \
/* Looks like someone forgot to add this to config system */
#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
# define ENABLE_FEATURE_FDISK_BLKSIZE 0
# define USE_FEATURE_FDISK_BLKSIZE(a)
#endif
#define fdisk_trivial_usage \
"[-ul" USE_FEATURE_FDISK_BLKSIZE("s") "] " \
"[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage "\n\n" \
"Change partition table\n" \
"\nOptions:" \
"\n -u Start and End are in sectors (instead of cylinders)" \
"\n -l Show partition table for each DISK, then exit" \
USE_FEATURE_FDISK_BLKSIZE( \
"\n -s Show partition sizes in kb for each DISK, then exit" \
) \
"\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
"\n -C CYLINDERS Set number of cylinders/heads/sectors" \
"\n -H HEADS\n" \
"\n -S SECTORS" \
#define blkid_trivial_usage \
""
#define blkid_full_usage "\n\n" \
"Print UUIDs of all filesystems."
#define findfs_trivial_usage \
"LABEL=label or UUID=uuid"
#define findfs_full_usage "\n\n" \
"Find a filesystem device based on a label or UUID."
#define findfs_example_usage \
"$ findfs LABEL=MyDevice"
#define find_trivial_usage \
"[PATH...] [EXPRESSION]"
#define find_full_usage "\n\n" \
"Search for files. The default PATH is the current directory,\n" \
"default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:" \
"\n -follow Dereference symlinks" \
USE_FEATURE_FIND_XDEV( \
"\n -xdev Don't descend directories on other filesystems") \
USE_FEATURE_FIND_MAXDEPTH( \
"\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
"\n tests/actions to command line arguments only") \
"\n -name PATTERN File name (w/o directory name) matches PATTERN" \
"\n -iname PATTERN Case insensitive -name" \
USE_FEATURE_FIND_PATH( \
"\n -path PATTERN Path matches PATTERN") \
USE_FEATURE_FIND_REGEX( \
"\n -regex PATTERN Path matches regex PATTERN") \
USE_FEATURE_FIND_TYPE( \
"\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
USE_FEATURE_FIND_PERM( \
"\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
"\n or exactly (NNN)") \
USE_FEATURE_FIND_MTIME( \
"\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
"\n or exactly (N) days") \
USE_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
"\n or exactly (N) minutes") \
USE_FEATURE_FIND_NEWER( \
"\n -newer FILE Modified time is more recent than FILE's") \
USE_FEATURE_FIND_INUM( \
"\n -inum N File has inode number N") \
USE_FEATURE_FIND_USER( \
"\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
USE_FEATURE_FIND_GROUP( \
"\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
USE_FEATURE_FIND_DEPTH( \
"\n -depth Process directory name after traversing it") \
USE_FEATURE_FIND_SIZE( \
"\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \
"\n +/-N: file size is bigger/smaller than N") \
"\n -print Print (default and assumed)" \
USE_FEATURE_FIND_PRINT0( \
"\n -print0 Delimit output with null characters rather than" \
"\n newlines") \
USE_FEATURE_FIND_CONTEXT ( \
"\n -context File has specified security context") \
USE_FEATURE_FIND_EXEC( \
"\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \
"\n matching files") \
USE_FEATURE_FIND_PRUNE( \
"\n -prune Stop traversing current subtree") \
USE_FEATURE_FIND_DELETE( \
"\n -delete Delete files, turns on -depth option") \
USE_FEATURE_FIND_PAREN( \
"\n (EXPR) Group an expression") \
#define find_example_usage \
"$ find / -name passwd\n" \
"/etc/passwd\n"
#define fold_trivial_usage \
"[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage "\n\n" \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
"standard output\n" \
"\nOptions:" \
"\n -b Count bytes rather than columns" \
"\n -s Break at spaces" \
"\n -w Use WIDTH columns instead of 80" \
#define free_trivial_usage \
""
#define free_full_usage "\n\n" \
"Display the amount of free and used system memory"
#define free_example_usage \
"$ free\n" \
" total used free shared buffers\n" \
" Mem: 257628 248724 8904 59644 93124\n" \
" Swap: 128516 8404 120112\n" \
"Total: 386144 257128 129016\n" \
#define freeramdisk_trivial_usage \
"DEVICE"
#define freeramdisk_full_usage "\n\n" \
"Free all memory used by the specified ramdisk"
#define freeramdisk_example_usage \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
"[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]"
#define fsck_full_usage "\n\n" \
"Check and repair filesystems\n" \
"\nOptions:" \
"\n -A Walk /etc/fstab and check all filesystems" \
"\n -N Don't execute, just show what would be done" \
"\n -P With -A, check filesystems in parallel" \
"\n -R With -A, skip the root filesystem" \
"\n -T Don't show title on startup" \
"\n -V Verbose" \
"\n -C n Write status information to specified filedescriptor" \
"\n -t type List of filesystem types to check" \
#define fsck_minix_trivial_usage \
"[-larvsmf] /dev/name"
#define fsck_minix_full_usage "\n\n" \
"Check MINIX filesystem\n" \
"\nOptions:" \
"\n -l List all filenames" \
"\n -r Perform interactive repairs" \
"\n -a Perform automatic repairs" \
"\n -v Verbose" \
"\n -s Output superblock information" \
"\n -m Show \"mode not cleared\" warnings" \
"\n -f Force file system check" \
#define ftpget_trivial_usage \
"[options] remote-host local-file remote-file"
#define ftpget_full_usage "\n\n" \
"Retrieve a remote file via FTP\n" \
"\nOptions:" \
USE_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c,--continue Continue previous transfer" \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
SKIP_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c Continue previous transfer" \
"\n -v Verbose" \
"\n -u Username" \
"\n -p Password" \
"\n -P Port number" \
)
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage "\n\n" \
"Store a local file on a remote machine via FTP\n" \
"\nOptions:" \
USE_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
SKIP_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -u Username" \
"\n -p Password" \
"\n -P Port number" \
)
#define fuser_trivial_usage \
"[options] FILE or PORT/PROTO"
#define fuser_full_usage "\n\n" \
"Find processes which use FILEs or PORTs\n" \
"\nOptions:" \
"\n -m Find processes which use same fs as FILEs" \
"\n -4 Search only IPv4 space" \
"\n -6 Search only IPv6 space" \
"\n -s Silent: just exit with 0 if any processes are found" \
"\n -k Kill found processes (otherwise display PIDs)" \
"\n -SIGNAL Signal to send (default: TERM)" \
#define getenforce_trivial_usage NOUSAGE_STR
#define getenforce_full_usage ""
#define getopt_trivial_usage \
"[OPTIONS]..."
#define getopt_full_usage "\n\n" \
"Parse command options\n" \
USE_GETOPT_LONG( \
"\n -a,--alternative Allow long options starting with single -" \
"\n -l,--longoptions=longopts Long options to be recognized" \
"\n -n,--name=progname The name under which errors are reported" \
"\n -o,--options=optstring Short options to be recognized" \
"\n -q,--quiet Disable error reporting by getopt(3)" \
"\n -Q,--quiet-output No normal output" \
"\n -s,--shell=shell Set shell quoting conventions" \
"\n -T,--test Test for getopt(1) version" \
"\n -u,--unquoted Don't quote the output" \
) \
SKIP_GETOPT_LONG( \
"\n -a Allow long options starting with single -" \
"\n -l longopts Long options to be recognized" \
"\n -n progname The name under which errors are reported" \
"\n -o optstring Short options to be recognized" \
"\n -q Disable error reporting by getopt(3)" \
"\n -Q No normal output" \
"\n -s shell Set shell quoting conventions" \
"\n -T Test for getopt(1) version" \
"\n -u Don't quote the output" \
)
#define getopt_example_usage \
"$ cat getopt.test\n" \
"#!/bin/sh\n" \
"GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
" -n 'example.busybox' -- \"$@\"`\n" \
"if [ $? != 0 ]; then exit 1; fi\n" \
"eval set -- \"$GETOPT\"\n" \
"while true; do\n" \
" case $1 in\n" \
" -a|--a-long) echo \"Option a\"; shift;;\n" \
" -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
" -c|--c-long)\n" \
" case \"$2\" in\n" \
" \"\") echo \"Option c, no argument\"; shift 2;;\n" \
" *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
" esac;;\n" \
" --) shift; break;;\n" \
" *) echo \"Internal error!\"; exit 1;;\n" \
" esac\n" \
"done\n"
#define getsebool_trivial_usage \
"-a or getsebool boolean..."
#define getsebool_full_usage "\n\n" \
" -a Show all SELinux booleans"
#define getty_trivial_usage \
"[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
#define getty_full_usage "\n\n" \
"Open a tty, prompt for a login name, then invoke /bin/login\n" \
"\nOptions:" \
"\n -h Enable hardware (RTS/CTS) flow control" \
"\n -i Do not display /etc/issue before running login" \
"\n -L Local line, do not do carrier detect" \
"\n -m Get baud rate from modem's CONNECT status message" \
"\n -w Wait for a CR or LF before sending /etc/issue" \
"\n -n Do not prompt the user for a login name" \
"\n -f issue_file Display issue_file instead of /etc/issue" \
"\n -l login_app Invoke login_app instead of /bin/login" \
"\n -t timeout Terminate after timeout if no username is read" \
"\n -I initstring Init string to send before anything else" \
"\n -H login_host Log login_host into the utmp file as the hostname" \
#define grep_trivial_usage \
"[-HhrilLnqvso" \
USE_DESKTOP("w") \
"eF" \
USE_FEATURE_GREP_EGREP_ALIAS("E") \
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
#define grep_full_usage "\n\n" \
"Search for PATTERN in each FILE or standard input\n" \
"\nOptions:" \
"\n -H Prefix output lines with filename where match was found" \
"\n -h Suppress the prefixing filename on output" \
"\n -r Recurse subdirectories" \
"\n -i Ignore case distinctions" \
"\n -l List names of files that match" \
"\n -L List names of files that do not match" \
"\n -n Print line number with output lines" \
"\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
"\n -v Select non-matching lines" \
"\n -s Suppress file open/read error messages" \
"\n -c Only print count of matching lines" \
"\n -o Show only the part of a line that matches PATTERN" \
"\n -m MAX Match up to MAX times per file" \
USE_DESKTOP( \
"\n -w Match whole words only") \
"\n -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
"\n -e PTRN Pattern to match" \
"\n -f FILE Read pattern from file" \
USE_FEATURE_GREP_CONTEXT( \
"\n -A Print NUM lines of trailing context" \
"\n -B Print NUM lines of leading context" \
"\n -C Print NUM lines of output context") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"$ grep ^[rR]oo. /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n"
#define egrep_trivial_usage NOUSAGE_STR
#define egrep_full_usage ""
#define fgrep_trivial_usage NOUSAGE_STR
#define fgrep_full_usage ""
#define gunzip_trivial_usage \
"[OPTION]... [FILE]..."
#define gunzip_full_usage "\n\n" \
"Uncompress FILEs (or standard input)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -f Force" \
"\n -t Test file integrity" \
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
"$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
#define gzip_trivial_usage \
"[OPTION]... [FILE]..."
#define gzip_full_usage "\n\n" \
"Compress FILEs (or standard input)\n" \
"\nOptions:" \
"\n -c Write to standard output" \
"\n -d Decompress" \
"\n -f Force" \
#define gzip_example_usage \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
"$ gzip /tmp/busybox.tar\n" \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
"[-d delay] [-n] [-f]" USE_FEATURE_WTMP(" [-w]")
#define halt_full_usage "\n\n" \
"Halt the system\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
"\n -n No call to sync()" \
"\n -f Force halt (don't go through init)" \
USE_FEATURE_WTMP( \
"\n -w Only write a wtmp record" \
)
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage "\n\n" \
"Options:" \
"\n -a Get/set fs readahead" \
"\n -A Set drive read-lookahead flag (0/1)" \
"\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
"\n -B Set Advanced Power Management setting (1-255)" \
"\n -c Get/set IDE 32-bit IO setting" \
"\n -C Check IDE power mode status" \
USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
"\n -d Get/set using_dma flag") \
"\n -D Enable/disable drive defect-mgmt" \
"\n -f Flush buffer cache for device on exit" \
"\n -g Display drive geometry" \
"\n -h Display terse usage information" \
USE_FEATURE_HDPARM_GET_IDENTITY( \
"\n -i Display drive identification") \
USE_FEATURE_HDPARM_GET_IDENTITY( \
"\n -I Detailed/current information directly from drive") \
"\n -k Get/set keep_settings_over_reset flag (0/1)" \
"\n -K Set drive keep_features_over_reset flag (0/1)" \
"\n -L Set drive doorlock (0/1) (removable harddisks only)" \
"\n -m Get/set multiple sector count" \
"\n -n Get/set ignore-write-errors flag (0/1)" \
"\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
"\n -P Set drive prefetch count" \
/* "\n -q Change next setting quietly" - not supported ib bbox */ \
"\n -Q Get/set DMA tagged-queuing depth (if supported)" \
"\n -r Get/set readonly flag (DANGEROUS to set)" \
USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
"\n -R Register an IDE interface (DANGEROUS)") \
"\n -S Set standby (spindown) timeout" \
"\n -t Perform device read timings" \
"\n -T Perform cache read timings" \
"\n -u Get/set unmaskirq flag (0/1)" \
USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
"\n -U Un-register an IDE interface (DANGEROUS)") \
"\n -v Defaults; same as -mcudkrag for IDE drives" \
"\n -V Display program version and exit immediately" \
USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
"\n -w Perform device reset (DANGEROUS)") \
"\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
"\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
"\n -X Set IDE xfer mode (DANGEROUS)" \
"\n -y Put IDE drive in standby mode" \
"\n -Y Put IDE drive to sleep" \
"\n -Z Disable Seagate auto-powersaving mode" \
"\n -z Re-read partition table" \
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage "\n\n" \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
"file name. With no FILE, or when FILE is -, read standard input.\n" \
"\nOptions:" \
"\n -n NUM Print first NUM lines instead of first 10" \
USE_FEATURE_FANCY_HEAD( \
"\n -c NUM Output the first NUM bytes" \
"\n -q Never output headers giving file names" \
"\n -v Always output headers giving file names") \
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define hexdump_trivial_usage \
"[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
#define hexdump_full_usage "\n\n" \
"Display file(s) or standard input in a user specified format\n" \
"\nOptions:" \
"\n -b One-byte octal display" \
"\n -c One-byte character display" \
"\n -C Canonical hex+ASCII, 16 bytes per line" \
"\n -d Two-byte decimal display" \
"\n -e FORMAT STRING" \
"\n -f FORMAT FILE" \
"\n -n LENGTH Interpret only LENGTH bytes of input" \
"\n -o Two-byte octal display" \
"\n -s OFFSET Skip OFFSET bytes" \
"\n -v Display all input data" \
"\n -x Two-byte hexadecimal display" \
USE_FEATURE_HEXDUMP_REVERSE( \
"\n -R Reverse of 'hexdump -Cv'") \
#define hd_trivial_usage \
"FILE..."
#define hd_full_usage "\n\n" \
"hd is an alias for hexdump -C"
#define hostid_trivial_usage \
""
#define hostid_full_usage "\n\n" \
"Print out a unique 32-bit identifier for the machine"
#define hostname_trivial_usage \
"[OPTION] [hostname | -F FILE]"
#define hostname_full_usage "\n\n" \
"Get or set hostname or DNS domain name\n" \
"\nOptions:" \
"\n -s Short" \
"\n -i Addresses for the hostname" \
"\n -d DNS domain name" \
"\n -f Fully qualified domain name" \
"\n -F FILE Use the contents of FILE to specify the hostname" \
#define hostname_example_usage \
"$ hostname\n" \
"sage\n"
#define httpd_trivial_usage \
"[-c conffile]" \
" [-p [ip:]port]" \
" [-i] [-f] [-v[v]]" \
USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \
USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
" [-h home]" \
" [-d/-e string]"
#define httpd_full_usage "\n\n" \
"Listen for incoming HTTP requests\n" \
"\nOptions:" \
"\n -c FILE Configuration file (default httpd.conf)" \
"\n -p [IP:]PORT Bind to ip:port (default *:80)" \
"\n -i Inetd mode" \
"\n -f Do not daemonize" \
"\n -v[v] Verbose" \
USE_FEATURE_HTTPD_SETUID( \
"\n -u USER[:GRP] Set uid/gid after binding to port") \
USE_FEATURE_HTTPD_BASIC_AUTH( \
"\n -r REALM Authentication Realm for Basic Authentication") \
USE_FEATURE_HTTPD_AUTH_MD5( \
"\n -m PASS Crypt PASS with md5 algorithm") \
"\n -h HOME Home directory (default .)" \
"\n -e STRING HTML encode STRING" \
"\n -d STRING URL decode STRING" \
#define hwclock_trivial_usage \
USE_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r|--show] [-s|--hctosys] [-w|--systohc]" \
" [-l|--localtime] [-u|--utc]" \
" [-f FILE]" \
) \
SKIP_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
)
#define hwclock_full_usage "\n\n" \
"Query and set hardware clock (RTC)\n" \
"\nOptions:" \
"\n -r Show hardware clock time" \
"\n -s Set system time from hardware clock" \
"\n -w Set hardware clock to system time" \
"\n -u Hardware clock is in UTC" \
"\n -l Hardware clock is in local time" \
"\n -f FILE Use specified device (e.g. /dev/rtc2)" \
#define id_trivial_usage \
"[OPTIONS]... [USER]"
#define id_full_usage "\n\n" \
"Print information about USER or the current user\n" \
"\nOptions:" \
USE_SELINUX( \
"\n -Z Print the security context" \
) \
"\n -u Print user ID" \
"\n -g Print group ID" \
"\n -G Print supplementary group IDs" \
"\n -n Print name instead of a number" \
"\n -r Print real user ID instead of effective ID" \
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
#define ifconfig_full_usage "\n\n" \
"Configure a network interface\n" \
"\nOptions:" \
"\n" \
USE_FEATURE_IPV6( \
" [add ADDRESS[/PREFIXLEN]]\n") \
USE_FEATURE_IPV6( \
" [del ADDRESS[/PREFIXLEN]]\n") \
" [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
" [netmask ADDRESS] [dstaddr ADDRESS]\n" \
USE_FEATURE_IFCONFIG_SLIP( \
" [outfill NN] [keepalive NN]\n") \
" " USE_FEATURE_IFCONFIG_HW("[hw ether" USE_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
" [[-]trailers] [[-]arp] [[-]allmulti]\n" \
" [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
" [mem_start NN] [io_addr NN] [irq NN]\n") \
" [up|down] ..."
#define ifenslave_trivial_usage \
"[-cdf] master-iface <slave-iface...>"
#define ifenslave_full_usage "\n\n" \
"Configure network interfaces for parallel routing\n" \
"\nOptions:" \
"\n -c, --change-active Change active slave" \
"\n -d, --detach Remove slave interface from bonding device" \
"\n -f, --force Force, even if interface is not Ethernet" \
/* "\n -r, --receive-slave Create a receive-only slave" */
#define ifenslave_example_usage \
"To create a bond device, simply follow these three steps :\n" \
"- ensure that the required drivers are properly loaded :\n" \
" # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
"- assign an IP address to the bond device :\n" \
" # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
"- attach all the interfaces you need to the bond device :\n" \
" # ifenslave bond0 eth0 eth1 eth2\n" \
" If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
" interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
" To detach a dead interface without setting the bond device down :\n" \
" # ifenslave -d bond0 eth1\n\n" \
" To set the bond device down and automatically release all the slaves :\n" \
" # ifconfig bond0 down\n\n" \
" To change active slave :\n" \
" # ifenslave -c bond0 eth0\n" \
#define ifup_trivial_usage \
"[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
#define ifup_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
USE_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
"\n -m Don't run any mappings" \
) \
"\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define ifdown_trivial_usage \
"[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
#define ifdown_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
USE_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
"\n -m Don't run any mappings" \
) \
"\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define inetd_trivial_usage \
"[-fe] [-q N] [-R N] [CONFFILE]"
#define inetd_full_usage "\n\n" \
"Listen for network connections and launch programs\n" \
"\nOptions:" \
"\n -f Run in foreground" \
"\n -e Log to stderr" \
"\n -q N Socket listen queue (default: 128)" \
"\n -R N Pause services after N connects/min" \
"\n (default: 0 - disabled)" \
#define init_trivial_usage \
""
#define init_full_usage "\n\n" \
"Init is the parent of all processes"
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
"runlevels, use sysvinit.\n" \
"\n" \
"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
"it has the following default behavior:\n" \
"\n" \
" ::sysinit:/etc/init.d/rcS\n" \
" ::askfirst:/bin/sh\n" \
" ::ctrlaltdel:/sbin/reboot\n" \
" ::shutdown:/sbin/swapoff -a\n" \
" ::shutdown:/bin/umount -a -r\n" \
" ::restart:/sbin/init\n" \
"\n" \
"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
"\n" \
" tty2::askfirst:/bin/sh\n" \
" tty3::askfirst:/bin/sh\n" \
" tty4::askfirst:/bin/sh\n" \
"\n" \
"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
"\n" \
" <id>:<runlevels>:<action>:<process>\n" \
"\n" \
" <id>:\n" \
"\n" \
" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
" The id field is used by BusyBox init to specify the controlling tty for\n" \
" the specified process to run on. The contents of this field are\n" \
" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
" be unique, although if it isn't you may have strange results. If this\n" \
" field is left blank, the controlling tty is set to the console. Also\n" \
" note that if BusyBox detects that a serial console is in use, then only\n" \
" entries whose controlling tty is either the serial console or /dev/null\n" \
" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
" stinkin' utmp.\n" \
"\n" \
" <runlevels>:\n" \
"\n" \
" The runlevels field is completely ignored.\n" \
"\n" \
" <action>:\n" \
"\n" \
" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
" once, restart, ctrlaltdel, and shutdown.\n" \
"\n" \
" The available actions can be classified into two groups: actions\n" \
" that are run only once, and actions that are re-run when the specified\n" \
" process exits.\n" \
"\n" \
" Run only-once actions:\n" \
"\n" \
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
" wants to run 'reboot' at this point to cause the system to reboot.\n" \
" Finally the 'shutdown' action specifies the actions to taken when\n" \
" init is told to reboot. Unmounting filesystems and disabling swap\n" \
" is a very good here.\n" \
"\n" \
" Run repeatedly actions:\n" \
"\n" \
" 'respawn' actions are run after the 'once' actions. When a process\n" \
" started with a 'respawn' action exits, init automatically restarts\n" \
" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
" respawning out of control. The 'askfirst' actions acts just like\n" \
" respawn, except that before running the specified process it\n" \
" displays the line \"Please press Enter to activate this console.\"\n" \
" and then waits for the user to press enter before starting the\n" \
" specified process.\n" \
"\n" \
" Unrecognized actions (like initdefault) will cause init to emit an\n" \
" error message, and then go along with its business. All actions are\n" \
" run in the order they appear in /etc/inittab.\n" \
"\n" \
" <process>:\n" \
"\n" \
" Specifies the process to be executed and its command line.\n" \
"\n" \
"Example /etc/inittab file:\n" \
"\n" \
" # This is run first except when booting in single-user mode\n" \
" #\n" \
" ::sysinit:/etc/init.d/rcS\n" \
" \n" \
" # /bin/sh invocations on selected ttys\n" \
" #\n" \
" # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
" ::askfirst:-/bin/sh\n" \
" # Start an \"askfirst\" shell on /dev/tty2-4\n" \
" tty2::askfirst:-/bin/sh\n" \
" tty3::askfirst:-/bin/sh\n" \
" tty4::askfirst:-/bin/sh\n" \
" \n" \
" # /sbin/getty invocations for selected ttys\n" \
" #\n" \
" tty4::respawn:/sbin/getty 38400 tty4\n" \
" tty5::respawn:/sbin/getty 38400 tty5\n" \
" \n" \
" \n" \
" # Example of how to put a getty on a serial line (for a terminal)\n" \
" #\n" \
" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
" #\n" \
" # Example how to put a getty on a modem line\n" \
" #::respawn:/sbin/getty 57600 ttyS2\n" \
" \n" \
" # Stuff to do when restarting the init process\n" \
" ::restart:/sbin/init\n" \
" \n" \
" # Stuff to do before rebooting\n" \
" ::ctrlaltdel:/sbin/reboot\n" \
" ::shutdown:/bin/umount -a -r\n" \
" ::shutdown:/sbin/swapoff -a\n"
#define inotifyd_trivial_usage \
"/user/space/agent dir/or/file/being/watched[:mask] ..."
#define inotifyd_full_usage "\n\n" \
"Spawn userspace agent on filesystem changes." \
"\nWhen a filesystem event matching the mask occurs" \
"\non specified file/directory an userspace agent is spawned" \
"\nwith the parameters:" \
"\n1. actual event(s)" \
"\n2. file/directory name" \
"\n3. name of subfile (if any), in case of watching a directory" \
"\n" \
"\n a File is accessed" \
"\n c File is modified" \
"\n e Metadata changed" \
"\n w Writtable file is closed" \
"\n 0 Unwrittable file is closed" \
"\n r File is opened" \
"\n m File is moved from X" \
"\n y File is moved to Y" \
"\n n Subfile is created" \
"\n d Subfile is deleted" \
"\n D Self is deleted" \
"\n M Self is moved" \
#define insmod_trivial_usage \
USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..."
#define insmod_full_usage "\n\n" \
"Load the specified kernel modules into the kernel" \
USE_FEATURE_2_4_MODULES( "\n" \
"\nOptions:" \
"\n -f Force module to load into the wrong kernel version" \
"\n -k Make module autoclean-able" \
"\n -v Verbose" \
"\n -q Quiet" \
"\n -L Lock to prevent simultaneous loads of a module" \
USE_FEATURE_INSMOD_LOAD_MAP( \
"\n -m Output load map to stdout" \
) \
"\n -o NAME Set internal module name to NAME" \
"\n -x Do not export externs" \
)
/* -v, -b, -c are ignored */
#define install_trivial_usage \
"[-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory"
#define install_full_usage "\n\n" \
"Copy files and set attributes\n" \
"\nOptions:" \
"\n -c Just copy (default)" \
"\n -d Create directories" \
"\n -D Create leading target directories" \
"\n -s Strip symbol table" \
"\n -p Preserve date" \
"\n -o USER Set ownership" \
"\n -g GRP Set group ownership" \
"\n -m MODE Set permissions" \
USE_SELINUX( \
"\n -Z Set security context" \
)
/* would need to make the " | " optional depending on more than one selected: */
#define ip_trivial_usage \
"[OPTIONS] {" \
USE_FEATURE_IP_ADDRESS("address | ") \
USE_FEATURE_IP_ROUTE("route | ") \
USE_FEATURE_IP_LINK("link | ") \
USE_FEATURE_IP_TUNNEL("tunnel | ") \
USE_FEATURE_IP_RULE("rule") \
"} {COMMAND}"
#define ip_full_usage "\n\n" \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
"where OBJECT := {" \
USE_FEATURE_IP_ADDRESS("address | ") \
USE_FEATURE_IP_ROUTE("route | ") \
USE_FEATURE_IP_LINK("link | ") \
USE_FEATURE_IP_TUNNEL("tunnel | ") \
USE_FEATURE_IP_RULE("rule") \
"}\n" \
"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
" [dev STRING] [to PREFIX] }"
#define ipaddr_full_usage "\n\n" \
"ipaddr {add|delete} IFADDR dev STRING\n" \
"ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
" [to PREFIX] [label PATTERN]\n" \
" IFADDR := PREFIX | ADDR peer PREFIX\n" \
" [broadcast ADDR] [anycast ADDR]\n" \
" [label STRING] [scope SCOPE-ID]\n" \
" SCOPE-ID := [host | link | global | NUMBER]" \
#define ipcalc_trivial_usage \
"[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]"
#define ipcalc_full_usage "\n\n" \
"Calculate IP network settings from a IP address\n" \
"\nOptions:" \
USE_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b,--broadcast Display calculated broadcast address" \
"\n -n,--network Display calculated network address" \
"\n -m,--netmask Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
"\n -p,--prefix Display the prefix for IP/NETMASK" \
"\n -h,--hostname Display first resolved host name" \
"\n -s,--silent Don't ever display error messages" \
) \
) \
SKIP_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b Display calculated broadcast address" \
"\n -n Display calculated network address" \
"\n -m Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
"\n -p Display the prefix for IP/NETMASK" \
"\n -h Display first resolved host name" \
"\n -s Don't ever display error messages" \
) \
)
#define ipcrm_trivial_usage \
"[-MQS key] [-mqs id]"
#define ipcrm_full_usage "\n\n" \
"Upper-case options MQS remove an object by shmkey value.\n" \
"Lower-case options remove an object by shmid value.\n" \
"\nOptions:" \
"\n -mM Remove memory segment after last detach" \
"\n -qQ Remove message queue" \
"\n -sS Remove semaphore" \
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage "\n\n" \
" -i Show specific resource" \
"\nResource specification:" \
"\n -m Shared memory segments" \
"\n -q Message queues" \
"\n -s Semaphore arrays" \
"\n -a All (default)" \
"\nOutput format:" \
"\n -t Time" \
"\n -c Creator" \
"\n -p Pid" \
"\n -l Limits" \
"\n -u Summary" \
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
#define iplink_full_usage "\n\n" \
"iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
"iplink show [DEVICE]" \
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
" replace | monitor } ROUTE }"
#define iproute_full_usage "\n\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [from ADDRESS iif STRING]\n" \
" [oif STRING] [tos TOS]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
" SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
" ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
" [metric METRIC]" \
#define iprule_trivial_usage \
"{[list | add | del] RULE}"
#define iprule_full_usage "\n\n" \
"iprule [list | add | del] SELECTOR ACTION\n" \
" SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
" [dev STRING] [pref NUMBER]\n" \
" ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
" [prohibit | reject | unreachable]\n" \
" [realms [SRCREALM/]DSTREALM]\n" \
" TABLE_ID := [local | main | default | NUMBER]" \
#define iptunnel_trivial_usage \
"{ add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }]\n" \
" [remote ADDR] [local ADDR] [ttl TTL]"
#define iptunnel_full_usage "\n\n" \
"iptunnel { add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
" [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
" [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
#define kbd_mode_trivial_usage \
"[-a|k|s|u] [-C TTY]"
#define kbd_mode_full_usage "\n\n" \
"Report or set the keyboard mode\n" \
"\nOptions set mode:" \
"\n -a Default (ASCII)" \
"\n -k Medium-raw (keyboard)" \
"\n -s Raw (scancode)" \
"\n -u Unicode (utf-8)" \
"\n -C TTY Affect TTY instead of /dev/tty" \
#define kill_trivial_usage \
"[-l] [-SIG] PID..."
#define kill_full_usage "\n\n" \
"Send a signal (default is TERM) to given PIDs\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
#define kill_example_usage \
"$ ps | grep apache\n" \
"252 root root S [apache]\n" \
"263 www-data www-data S [apache]\n" \
"264 www-data www-data S [apache]\n" \
"265 www-data www-data S [apache]\n" \
"266 www-data www-data S [apache]\n" \
"267 www-data www-data S [apache]\n" \
"$ kill 252\n"
#define killall_trivial_usage \
"[-l] [-q] [-SIG] process-name..."
#define killall_full_usage "\n\n" \
"Send a signal (default is TERM) to given processes\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
"\n -q Do not complain if no processes were killed" \
#define killall_example_usage \
"$ killall apache\n"
#define killall5_trivial_usage \
"[-l] [-SIG]"
#define killall5_full_usage "\n\n" \
"Send a signal (default is TERM) to all processes outside current session\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
#define klogd_trivial_usage \
"[-c N] [-n]"
#define klogd_full_usage "\n\n" \
"Kernel logger\n" \
"\nOptions:" \
"\n -c N Only messages with level < N are printed to console" \
"\n -n Run in foreground" \
#define length_trivial_usage \
"STRING"
#define length_full_usage "\n\n" \
"Print STRING's length"
#define length_example_usage \
"$ length Hello\n" \
"5\n"
#define less_trivial_usage \
"[-EMNmh~I?] [FILE...]"
#define less_full_usage "\n\n" \
"View a file or list of files. The position within files can be\n" \
"changed, and files can be manipulated in various ways.\n" \
"\nOptions:" \
"\n -E Quit once the end of a file is reached" \
"\n -M,-m Display a status line containing the line numbers" \
"\n and percentage through the file" \
"\n -N Prefix line numbers to each line" \
"\n -I Ignore case in all searches" \
"\n -~ Suppress ~s displayed past the end of the file" \
#define linux32_trivial_usage NOUSAGE_STR
#define linux32_full_usage ""
#define linux64_trivial_usage NOUSAGE_STR
#define linux64_full_usage ""
#define linuxrc_trivial_usage NOUSAGE_STR
#define linuxrc_full_usage ""
#define setarch_trivial_usage \
"personality program [args...]"
#define setarch_full_usage "\n\n" \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
" linux64 Set 64bit uname emulation" \
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage "\n\n" \
"Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
"Use '--' to indicate that all following arguments are non-options.\n" \
"\nOptions:" \
"\n -s Make symlinks instead of hardlinks" \
"\n -f Remove existing destination files" \
"\n -n Don't dereference symlinks - treat like normal file" \
"\n -b Make a backup of the target (if exists) before link operation" \
"\n -S suf Use suffix instead of ~ when making backup files" \
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
"lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
#define load_policy_trivial_usage NOUSAGE_STR
#define load_policy_full_usage ""
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage "\n\n" \
"Load a console font from standard input" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadfont_example_usage \
"$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage "\n\n" \
"Load a binary keyboard translation table from standard input\n" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadkmap_example_usage \
"$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage "\n\n" \
"Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \
"\nOptions:" \
"\n -s Log to stderr as well as the system log" \
"\n -t TAG Log using the specified tag (defaults to user name)" \
"\n -p PRIO Priority (numeric or facility.level pair)" \
#define logger_example_usage \
"$ logger \"hello\"\n"
#define login_trivial_usage \
"[-p] [-h HOST] [[-f] USER]"
#define login_full_usage "\n\n" \
"Begin a new session on the system\n" \
"\nOptions:" \
"\n -f Do not authenticate (user already authenticated)" \
"\n -h Name of the remote host" \
"\n -p Preserve environment" \
#define logname_trivial_usage \
""
#define logname_full_usage "\n\n" \
"Print the name of the current user"
#define logname_example_usage \
"$ logname\n" \
"root\n"
#define logread_trivial_usage \
"[OPTION]..."
#define logread_full_usage "\n\n" \
"Show messages in syslogd's circular buffer\n" \
"\nOptions:" \
"\n -f Output data as log grows" \
#define losetup_trivial_usage \
"[-o OFS] LOOPDEV FILE - associate loop devices\n" \
" losetup -d LOOPDEV - disassociate\n" \
" losetup [-f] - show"
#define losetup_full_usage "\n\n" \
"Options:" \
"\n -o OFS Start OFS bytes into FILE" \
"\n -f Show first free loop device" \
#define losetup_notes_usage \
"No arguments will display all current associations.\n" \
"One argument (losetup /dev/loop1) will display the current association\n" \
"(if any), or disassociate it (with -d). The display shows the offset\n" \
"and filename of the file the loop device is currently bound to.\n\n" \
"Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
"with an optional offset (-o 12345). Encryption is not yet supported.\n" \
"losetup -f will show the first loop free loop device\n\n"
#define lpd_trivial_usage \
"SPOOLDIR [HELPER [ARGS...]]"
#define lpd_full_usage "\n\n" \
"SPOOLDIR must contain (symlinks to) device nodes or directories" \
"\nwith names matching print queue names. In the first case, jobs are" \
"\nsent directly to the device. Otherwise each job is stored in queue" \
"\ndirectory and HELPER program is called. Name of file to print" \
"\nis passed in $DATAFILE variable." \
"\nExample:" \
"\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
#define lpq_trivial_usage \
"[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]"
#define lpq_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)" \
"\n -d Delete jobs" \
"\n -f Force any waiting job to be printed" \
"\n -s Short display" \
#define lpr_trivial_usage \
"-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE...]"
/* -C CLASS exists too, not shown.
* CLASS is supposed to be printed on banner page, if one is requested */
#define lpr_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)"\
"\n -m Send mail on completion" \
"\n -h Print banner page too" \
"\n -V Verbose" \
#define ls_trivial_usage \
"[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \
USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
USE_SELINUX("K") "] [filenames...]"
#define ls_full_usage "\n\n" \
"List directory contents\n" \
"\nOptions:" \
"\n -1 List in a single column" \
"\n -A Don't list . and .." \
"\n -a Don't hide entries starting with ." \
"\n -C List by columns" \
USE_FEATURE_LS_TIMESTAMPS( \
"\n -c With -l: sort by ctime") \
USE_FEATURE_LS_COLOR( \
"\n --color[={always,never,auto}] Control coloring") \
"\n -d List directory entries instead of contents" \
USE_FEATURE_LS_TIMESTAMPS( \
"\n -e List full date and time") \
USE_FEATURE_LS_FILETYPES( \
"\n -F Append indicator (one of */=@|) to entries") \
"\n -i List inode numbers" \
"\n -l Long listing format" \
"\n -n List numeric UIDs and GIDs instead of names" \
USE_FEATURE_LS_FILETYPES( \
"\n -p Append indicator (one of /=@|) to entries") \
USE_FEATURE_LS_FOLLOWLINKS( \
"\n -L List entries pointed to by symlinks") \
USE_FEATURE_LS_RECURSIVE( \
"\n -R List subdirectories recursively") \
USE_FEATURE_LS_SORTFILES( \
"\n -r Sort in reverse order") \
USE_FEATURE_LS_SORTFILES( \
"\n -S Sort by file size") \
"\n -s List the size of each file, in blocks" \
USE_FEATURE_AUTOWIDTH( \
"\n -T NUM Assume tabstop every NUM columns") \
USE_FEATURE_LS_TIMESTAMPS( \
"\n -t With -l: sort by modification time") \
USE_FEATURE_LS_TIMESTAMPS( \
"\n -u With -l: sort by access time") \
USE_FEATURE_LS_SORTFILES( \
"\n -v Sort by version") \
USE_FEATURE_AUTOWIDTH( \
"\n -w NUM Assume the terminal is NUM columns wide") \
"\n -x List by lines" \
USE_FEATURE_LS_SORTFILES( \
"\n -X Sort by extension") \
USE_FEATURE_HUMAN_READABLE( \
"\n -h List sizes in human readable format (1K 243M 2G)") \
USE_SELINUX( \
"\n -k List security context") \
USE_SELINUX( \
"\n -K List security context in long format") \
USE_SELINUX( \
"\n -Z List security context and permission") \
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
#define lsattr_full_usage "\n\n" \
"List file attributes on an ext2 fs\n" \
"\nOptions:" \
"\n -R Recursively list subdirectories" \
"\n -a Do not hide entries starting with ." \
"\n -d List directory entries instead of contents" \
"\n -l List long flag names" \
"\n -v List the file's version/generation number" \
#define lsmod_trivial_usage \
""
#define lsmod_full_usage "\n\n" \
"List the currently loaded kernel modules"
#if ENABLE_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage "\n\n" \
"Create a range of block or character special files" \
"\n" \
"\nTYPE is:" \
"\n b Block device" \
"\n c Character device" \
"\n f FIFO, MAJOR and MINOR are ignored" \
"\n" \
"\nFIRST..LAST specify numbers appended to NAME." \
"\nIf 's' is the last argument, the base device is created as well." \
"\n" \
"\nExamples:" \
"\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
"\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
"# makedevs /dev/ttyS c 4 66 2 63\n" \
"[creates ttyS2-ttyS63]\n" \
"# makedevs /dev/hda b 3 0 0 8 s\n" \
"[creates hda,hda1-hda8]\n"
#endif
#if ENABLE_FEATURE_MAKEDEVS_TABLE
#define makedevs_trivial_usage \
"[-d device_table] rootdir"
#define makedevs_full_usage "\n\n" \
"Create a range of special files as specified in a device table.\n" \
"Device table entries take the form of:\n" \
"<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
"Where name is the file name, type can be one of:\n" \
" f Regular file\n" \
" d Directory\n" \
" c Character device\n" \
" b Block device\n" \
" p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"to device special files. A '-' may be used for blank entries."
#define makedevs_example_usage \
"For example:\n" \
"<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
"/dev d 755 0 0 - - - - -\n" \
"/dev/console c 666 0 0 5 1 - - -\n" \
"/dev/null c 666 0 0 1 3 0 0 -\n" \
"/dev/zero c 666 0 0 1 5 0 0 -\n" \
"/dev/hda b 640 0 0 3 0 0 0 -\n" \
"/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
"Will Produce:\n" \
"/dev\n" \
"/dev/console\n" \
"/dev/null\n" \
"/dev/zero\n" \
"/dev/hda\n" \
"/dev/hda[0-15]\n"
#endif
#define makemime_trivial_usage \
"[OPTION]... [FILE]..."
#define makemime_full_usage "\n\n" \
"Create MIME-encoded message\n" \
"\nOptions:" \
"\n -C Charset" \
"\n -e Tranfer encoding. Ignored. base64 is assumed" \
"\n" \
"\nOther options are silently ignored." \
#define man_trivial_usage \
"[OPTION]... [MANPAGE]..."
#define man_full_usage "\n\n" \
"Format and display manual page\n" \
"\nOptions:" \
"\n -a Display all pages" \
"\n -w Show page locations" \
#define matchpathcon_trivial_usage \
"[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
#define matchpathcon_full_usage "\n\n" \
" -n Do not display path" \
"\n -N Do not use translations" \
"\n -f Use alternate file_context file" \
"\n -p Use prefix to speed translations" \
"\n -V Verify file context on disk matches defaults" \
#define md5sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage "\n\n" \
"Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
"\n -c Check MD5 sums against given list" \
"\n -s Don't output anything, status code shows success" \
"\n -w Warn about improperly formatted MD5 checksum lines") \
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
"$ md5sum busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
"$ md5sum -c -\n" \
"6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
"busybox: OK\n" \
"^D\n"
#define mdev_trivial_usage \
"[-s]"
#define mdev_full_usage "\n\n" \
" -s Scan /sys and populate /dev during system boot\n" \
"\n" \
"Called with no options (via hotplug) it uses environment variables\n" \
"to determine which device to add/remove."
#define mdev_notes_usage "" \
USE_FEATURE_MDEV_CONFIG( \
"The mdev config file contains lines that look like:\n" \
" hd[a-z][0-9]* 0:3 660\n\n" \
"That's device name (with regex match), uid:gid, and permissions.\n\n" \
USE_FEATURE_MDEV_EXEC( \
"Optionally, that can be followed (on the same line) by a special character\n" \
"and a command line to run after creating/before deleting the corresponding\n" \
"device(s). The environment variable $MDEV indicates the active device node\n" \
"(which is useful if it's a regex match). For example:\n\n" \
" hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
"The special characters are @ (run after creating), $ (run before deleting),\n" \
"and * (run both after creating and before deleting). The commands run in\n" \
"the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
"Config file parsing stops on the first matching line. If no config\n" \
"entry is matched, devices are created with default 0:0 660. (Make\n" \
"the last line match .* to override this.)\n\n" \
)
#define mesg_trivial_usage \
"[y|n]"
#define mesg_full_usage "\n\n" \
"Control write access to your terminal\n" \
" y Allow write access to your terminal\n" \
" n Disallow write access to your terminal"
#define microcom_trivial_usage \
"[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
#define microcom_full_usage "\n\n" \
"Copy bytes for stdin to TTY and from TTY to stdout\n" \
"\nOptions:" \
"\n -d Wait up to DELAY ms for TTY output before sending every" \
"\n next byte to it" \
"\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
"\n -s Set serial line to SPEED" \
"\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage "\n\n" \
"Create DIRECTORY\n" \
"\nOptions:" \
"\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \
"\n -p No error if existing, make parent directories as needed" \
USE_SELINUX( \
"\n -Z Set security context" \
)
#define mkdir_example_usage \
"$ mkdir /tmp/foo\n" \
"$ mkdir /tmp/foo\n" \
"/tmp/foo: File exists\n" \
"$ mkdir /tmp/foo/bar/baz\n" \
"/tmp/foo/bar/baz: No such file or directory\n" \
"$ mkdir -p /tmp/foo/bar/baz\n"
#define mke2fs_trivial_usage \
"[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
"[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
"[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
"[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
"[-M last-mounted-directory] [-S] [-T filesystem-type] " \
"device [blocks-count]"
#define mke2fs_full_usage "\n\n" \
" -b size Block size in bytes" \
"\n -c Check for bad blocks before creating" \
"\n -E opts Set extended options" \
"\n -f size Fragment size in bytes" \
"\n -F Force (ignore sanity checks)" \
"\n -g num Number of blocks in a block group" \
"\n -i ratio The bytes/inode ratio" \
"\n -j Create a journal (ext3)" \
"\n -J opts Set journal options (size/device)" \
"\n -l file Read bad blocks list from file" \
"\n -L lbl Set the volume label" \
"\n -m percent Percent of fs blocks to reserve for admin" \
"\n -M dir Set last mounted directory" \
"\n -n Do not actually create anything" \
"\n -N num Number of inodes to create" \
"\n -o os Set the 'creator os' field" \
"\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" \
"\n -q Quiet" \
"\n -r rev Set filesystem revision" \
"\n -S Write superblock and group descriptors only" \
"\n -T fs-type Set usage type (news/largefile/largefile4)" \
"\n -v Verbose" \
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage "\n\n" \
"Create named pipe (identical to 'mknod name p')\n" \
"\nOptions:" \
"\n -m MODE Mode (default a=rw)" \
USE_SELINUX( \
"\n -Z Set security context" \
)
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage "\n\n" \
"Make a MINIX filesystem\n" \
"\nOptions:" \
"\n -c Check device for bad blocks" \
"\n -n [14|30] Maximum length of filenames" \
"\n -i INODES Number of inodes for the filesystem" \
"\n -l FILENAME Read bad blocks list from FILENAME" \
"\n -v Make version 2 filesystem" \
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage "\n\n" \
"Create a special file (block, character, or pipe)\n" \
"\nOptions:" \
"\n -m Create the special file using the specified mode (default a=rw)" \
"\nTYPEs include:" \
"\n b: Make a block device" \
"\n c or u: Make a character device" \
"\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
USE_SELINUX( \
"\n -Z Set security context" \
)
#define mknod_example_usage \
"$ mknod /dev/fd0 b 2 0\n" \
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
"DEVICE"
#define mkswap_full_usage "\n\n" \
"Prepare block device to be used as swap partition"
#if 0
"[-c] [-v0|-v1] DEVICE [BLOCKS]"
"\nOptions:"
"\n -c Check for readability"
"\n -v0 Make swap version 0 (max 128M)"
"\n -v1 Make swap version 1 (default for kernels > 2.1.117)"
"\n BLOCKS Number of blocks to use (default is entire partition)"
#endif
#define mktemp_trivial_usage \
"[-dt] [-p DIR] [TEMPLATE]"
#define mktemp_full_usage "\n\n" \
"Create a temporary file with name based on TEMPLATE and print its name.\n" \
"TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
"\nOptions:" \
"\n -d Make a directory instead of a file" \
/* "\n -q Fail silently if an error occurs" - we ignore it */ \
"\n -t Generate a path rooted in temporary directory" \
"\n -p DIR Use DIR as a temporary directory (implies -t)" \
"\n" \
"\nFor -t or -p, directory is chosen as follows:" \
"\n$TMPDIR if set, else -p DIR, else /tmp" \
#define mktemp_example_usage \
"$ mktemp /tmp/temp.XXXXXX\n" \
"/tmp/temp.mWiLjM\n" \
"$ ls -la /tmp/temp.mWiLjM\n" \
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
"[-knqrsv] MODULE [symbol=value...]"
#define modprobe_full_usage "\n\n" \
"Options:" \
USE_FEATURE_2_4_MODULES( \
"\n -k Make module autoclean-able" \
) \
"\n -n Dry run" \
"\n -q Quiet" \
"\n -r Remove module (stacks) or do autoclean" \
"\n -s Report via syslog instead of stderr" \
"\n -v Verbose" \
USE_FEATURE_MODPROBE_BLACKLIST( \
"\n -b Apply blacklist to module names too" \
)
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
"pass each module it loads.\n" \
"\n" \
"The configuration file is searched (in order) amongst:\n" \
"\n" \
" /etc/modprobe.conf (2.6 only)\n" \
" /etc/modules.conf\n" \
" /etc/conf.modules (deprecated)\n" \
"\n" \
"They all have the same syntax (see below). If none is present, it is\n" \
"_not_ an error; each loaded module is then expected to load without\n" \
"options. Once a file is found, the others are tested for.\n" \
"\n" \
"/etc/modules.conf entry format:\n" \
"\n" \
" alias <alias_name> <mod_name>\n" \
" Makes it possible to modprobe alias_name, when there is no such module.\n" \
" It makes sense if your mod_name is long, or you want a more representative\n" \
" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
" This makes it also possible to use a different set of options (below) for\n" \
" the module and the alias.\n" \
" A module can be aliased more than once.\n" \
"\n" \
" options <mod_name|alias_name> <symbol=value...>\n" \
" When loading module mod_name (or the module aliased by alias_name), pass\n" \
" the \"symbol=value\" pairs as option to that module.\n" \
"\n" \
"Sample /etc/modules.conf file:\n" \
"\n" \
" options tulip irq=3\n" \
" alias tulip tulip2\n" \
" options tulip2 irq=4 io=0x308\n" \
"\n" \
"Other functionality offered by 'classic' modprobe is not available in\n" \
"this implementation.\n" \
"\n" \
"If module options are present both in the config file, and on the command line,\n" \
"then the options from the command line will be passed to the module _after_\n" \
"the options from the config file. That way, you can have defaults in the config\n" \
"file, and override them for a specific usage from the command line.\n"
#define modprobe_example_usage \
"(with the above /etc/modules.conf):\n\n" \
"$ modprobe tulip\n" \
" will load the module 'tulip' with default option 'irq=3'\n\n" \
"$ modprobe tulip irq=5\n" \
" will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
"$ modprobe tulip2\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
" which are the default for alias 'tulip2'\n\n" \
"$ modprobe tulip2 irq=8\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
" which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
" from the command line\n\n" \
"$ modprobe tulip2 irq=2 io=0x210\n" \
" will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
" which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
" from the command line\n"
#define more_trivial_usage \
"[FILE...]"
#define more_full_usage "\n\n" \
"View FILE or standard input one screenful at a time"
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage "\n\n" \
"Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \
"\nOptions:" \
"\n -a Mount all filesystems in fstab" \
USE_FEATURE_MOUNT_FAKE( \
"\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \
) \
USE_FEATURE_MTAB_SUPPORT( \
"\n -n Don't update /etc/mtab" \
) \
"\n -r Read-only mount" \
"\n -t fs-type Filesystem type" \
"\n -w Read-write mount (default)" \
"\n" \
"-o option:\n" \
USE_FEATURE_MOUNT_LOOP( \
" loop Ignored (loop devices are autodetected)\n" \
) \
USE_FEATURE_MOUNT_FLAGS( \
" [a]sync Writes are asynchronous / synchronous\n" \
" [no]atime Disable / enable updates to inode access times\n" \
" [no]diratime Disable / enable atime updates to directories\n" \
" [no]relatime Disable / enable atime updates relative to modification time\n" \
" [no]dev Allow use of special device files / disallow them\n" \
" [no]exec Allow use of executable files / disallow them\n" \
" [no]suid Allow set-user-id-root programs / disallow them\n" \
" [r]shared Convert [recursively] to a shared subtree\n" \
" [r]slave Convert [recursively] to a slave subtree\n" \
" [r]private Convert [recursively] to a private subtree\n" \
" [un]bindable Make mount point [un]able to be bind mounted\n" \
" bind Bind a directory to an additional location\n" \
" move Relocate an existing mount point\n" \
) \
" remount Remount a mounted filesystem, changing its flags\n" \
" ro/rw Mount for read-only / read-write\n" \
"\n" \
"There are EVEN MORE flags that are specific to each filesystem\n" \
"You'll have to see the written documentation for those filesystems" \
#define mount_example_usage \
"$ mount\n" \
"/dev/hda3 on / type minix (rw)\n" \
"proc on /proc type proc (rw)\n" \
"devpts on /dev/pts type devpts (rw)\n" \
"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
"$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
"$ mount cd_image.iso mydir\n"
#define mount_notes_usage \
"Returns 0 for success, number of failed mounts for -a, or errno for one mount."
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage "\n\n" \
"mountpoint checks if the directory is a mountpoint\n" \
"\nOptions:" \
"\n -q Quiet" \
"\n -d Print major/minor device number of the filesystem" \
"\n -x Print major/minor device number of the blockdevice" \
#define mountpoint_example_usage \
"$ mountpoint /proc\n" \
"/proc is not a mountpoint\n" \
"$ mountpoint /sys\n" \
"/sys is a mountpoint\n"
#define mt_trivial_usage \
"[-f device] opcode value"
#define mt_full_usage "\n\n" \
"Control magnetic tape drive operation\n" \
"\n" \
"Available Opcodes:\n" \
"\n" \
"bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
"fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
"ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
"setpart tell unload unlock weof wset" \
#define mv_trivial_usage \
"[OPTION]... SOURCE DEST\n" \
"or: mv [OPTION]... SOURCE... DIRECTORY"
#define mv_full_usage "\n\n" \
"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -f Don't prompt before overwriting" \
"\n -i Interactive, prompt before overwrite" \
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage "\n\n" \
"Rename network interface while it in the down state\n" \
"\nOptions:" \
"\n -c FILE Use configuration file (default is /etc/mactab)" \
"\n -s Use syslog (LOCAL0 facility)" \
"\n IFNAME MACADDR new_interface_name interface_mac_address" \
#define nameif_example_usage \
"$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
" or\n" \
"$ nameif -c /etc/my_mactab_file\n" \
#if !ENABLE_DESKTOP
#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
#define NC_OPTIONS_STR "\n\nOptions:"
#else
#define NC_OPTIONS_STR
#endif
#define nc_trivial_usage \
USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \
"["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]")
#define nc_full_usage "\n\n" \
"Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
NC_OPTIONS_STR \
USE_NC_EXTRA( \
"\n -e Exec rest of command line after connect" \
"\n -i SECS Delay interval for lines sent" \
"\n -w SECS Timeout for connect" \
"\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
) \
USE_NC_SERVER( \
"\n -l Listen mode, for inbound connects" \
USE_NC_EXTRA( \
"\n (use -l twice with -e for persistent server)") \
"\n -p PORT Local port number" \
)
#define nc_notes_usage "" \
USE_NC_EXTRA( \
"To use netcat as a terminal emulator on a serial port:\n\n" \
"$ stty 115200 -F /dev/ttyS0\n" \
"$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
)
#define nc_example_usage \
"$ nc foobar.somedomain.com 25\n" \
"220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
"help\n" \
"214-Commands supported:\n" \
"214- HELO EHLO MAIL RCPT DATA AUTH\n" \
"214 NOOP QUIT RSET HELP\n" \
"quit\n" \
"221 foobar closing connection\n"
#else /* DESKTOP nc - much more compatible with nc 1.10 */
#define nc_trivial_usage \
"[-options] hostname port - connect" \
USE_NC_SERVER("\n" \
"nc [-options] -l -p port [hostname] [port] - listen")
#define nc_full_usage "\n\n" \
"Options:" \
"\n -e prog [args] Program to exec after connect (must be last)" \
USE_NC_SERVER( \
"\n -l Listen mode, for inbound connects" \
) \
"\n -n Don't do DNS resolution" \
"\n -s addr Local address" \
"\n -p port Local port" \
"\n -u UDP mode" \
"\n -v Verbose (cumulative: -vv)" \
"\n -w secs Timeout for connects and final net reads" \
USE_NC_EXTRA( \
"\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \
"\n -o file Hex dump of traffic" \
"\n -z Zero-I/O mode (scanning)" \
) \
/* "\n -r Randomize local and remote ports" */
/* "\n -g gateway Source-routing hop point[s], up to 8" */
/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
#endif
#define netstat_trivial_usage \
"[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")USE_FEATURE_NETSTAT_PRG("p")"]"
#define netstat_full_usage "\n\n" \
"Display networking information\n" \
"\nOptions:" \
"\n -l Display listening server sockets" \
"\n -a Display all sockets (default: connected)" \
"\n -e Display other/more information" \
"\n -n Don't resolve names" \
"\n -t Tcp sockets" \
"\n -u Udp sockets" \
"\n -w Raw sockets" \
"\n -x Unix sockets" \
"\n -r Display routing table" \
USE_FEATURE_NETSTAT_WIDE( \
"\n -W Display with no column truncation" \
) \
USE_FEATURE_NETSTAT_PRG( \
"\n -p Display PID/Program name for sockets" \
)
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG]...]"
#define nice_full_usage "\n\n" \
"Run a program with modified scheduling priority\n" \
"\nOptions:" \
"\n -n ADJUST Adjust the scheduling priority by ADJUST" \
#define nmeter_trivial_usage \
"format_string"
#define nmeter_full_usage "\n\n" \
"Monitor system in real time\n\n" \
"Format specifiers:\n" \
"%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
" (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
"%[niface] Monitor network interface 'iface'\n" \
"%m Monitor allocated memory\n" \
"%[mf] Monitor free memory\n" \
"%[mt] Monitor total memory\n" \
"%s Monitor allocated swap\n" \
"%f Monitor number of used file descriptors\n" \
"%Ni Monitor total/specific IRQ rate\n" \
"%x Monitor context switch rate\n" \
"%p Monitor forks\n" \
"%[pn] Monitor # of processes\n" \
"%b Monitor block io\n" \
"%Nt Show time (with N decimal points)\n" \
"%Nd Milliseconds between updates (default=1000)\n" \
"%r Print <cr> instead of <lf> at EOL" \
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
"COMMAND [ARGS]"
#define nohup_full_usage "\n\n" \
"Run a command immune to hangups, with output to a non-tty"
#define nohup_example_usage \
"$ nohup make &"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define nslookup_full_usage "\n\n" \
"Query the nameserver for the IP address of the given HOST\n" \
"optionally using a specified DNS server"
#define nslookup_example_usage \
"$ nslookup localhost\n" \
"Server: default\n" \
"Address: default\n" \
"\n" \
"Name: debian\n" \
"Address: 127.0.0.1\n"
#define od_trivial_usage \
"[-aBbcDdeFfHhIiLlOovXx] " USE_DESKTOP("[-t TYPE] ") "[FILE]"
#define od_full_usage "\n\n" \
"Write an unambiguous representation, octal bytes by default, of FILE\n" \
"to standard output. With no FILE or when FILE is -, read standard input."
#define openvt_trivial_usage \
"[-c NUM] [-sw] [COMMAND [ARGS]]"
#define openvt_full_usage "\n\n" \
"Start COMMAND on a new virtual terminal\n" \
"\nOptions:" \
"\n -c Use specified VT" \
"\n -s Switch to the VT" \
/* "\n -l Run COMMAND as login shell (by prepending '-')" */ \
"\n -w Wait for COMMAND to exit" \
#define openvt_example_usage \
"openvt 2 /bin/ash\n"
#define parse_trivial_usage \
"[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
#define parse_full_usage "\n\n" \
"[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..."
#define passwd_trivial_usage \
"[OPTION] [name]"
#define passwd_full_usage "\n\n" \
"Change user's password. If no name is specified,\n" \
"changes the password for the current user.\n" \
"\nOptions:" \
"\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \
"\n -d Delete password for the account" \
"\n -l Lock (disable) account" \
"\n -u Unlock (re-enable) account" \
#define chpasswd_trivial_usage \
USE_GETOPT_LONG("[--md5|--encrypted]") SKIP_GETOPT_LONG("[-m|-e]")
#define chpasswd_full_usage "\n\n" \
"Read user:password information from stdin " \
"and update /etc/passwd accordingly.\n" \
"\nOptions:" \
USE_GETOPT_LONG( \
"\n -e,--encrypted Supplied passwords are in encrypted form" \
"\n -m,--md5 Use MD5 encryption instead of DES" \
) \
SKIP_GETOPT_LONG( \
"\n -e Supplied passwords are in encrypted form" \
"\n -m Use MD5 encryption instead of DES" \
)
#define patch_trivial_usage \
"[-p NUM] [-i DIFF] [-R]"
#define patch_full_usage "\n\n" \
" -p NUM Strip NUM leading components from file names" \
"\n -i DIFF Read DIFF instead of stdin" \
"\n -R Reverse patch" \
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
#define pgrep_trivial_usage \
"[-flnovx] pattern"
#define pgrep_full_usage "\n\n" \
"Display process(es) selected by regex pattern\n" \
"\nOptions:" \
"\n -l Show command name too" \
"\n -f Match against entire command line" \
"\n -n Show the newest process only" \
"\n -o Show the oldest process only" \
"\n -v Negate the matching" \
"\n -x Match whole name (not substring)" \
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define pidof_trivial_usage \
"[OPTION] [NAME...]"
#define USAGE_PIDOF "\n\nOptions:"
#else
#define pidof_trivial_usage \
"[NAME...]"
#define USAGE_PIDOF /* none */
#endif
#define pidof_full_usage "\n\n" \
"List PIDs of all processes with names that match NAMEs" \
USAGE_PIDOF \
USE_FEATURE_PIDOF_SINGLE( \
"\n -s Show only one PID") \
USE_FEATURE_PIDOF_OMIT( \
"\n -o PID Omit given pid" \
"\n Use %PPID to omit pid of pidof's parent") \
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
USE_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh\n20351 5973 5950\n") \
USE_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh -o %PPID\n20351 5950")
#if !ENABLE_FEATURE_FANCY_PING
#define ping_trivial_usage \
"host"
#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#define ping6_trivial_usage \
"host"
#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
"[OPTION]... host"
#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -4, -6 Force IPv4 or IPv6 hostname resolution" \
"\n -c CNT Send only CNT pings" \
"\n -s SIZE Send SIZE data bytes in packets (default=56)" \
"\n -I iface/IP Use interface or IP address as source" \
"\n -W timeout Seconds to wait for the first response (default:10)" \
"\n (after all -c CNT packets are sent)" \
"\n -w deadline Seconds until ping exits (default:infinite)" \
"\n (can exit earlier with -c CNT)" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
#define ping6_trivial_usage \
"[OPTION]... host"
#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -c CNT Send only CNT pings" \
"\n -s SIZE Send SIZE data bytes in packets (default=56)" \
"\n -I iface/IP Use interface or IP address as source" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
#endif
#define ping_example_usage \
"$ ping localhost\n" \
"PING slag (127.0.0.1): 56 data bytes\n" \
"64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
"\n" \
"--- debian ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define ping6_example_usage \
"$ ping6 ip6-localhost\n" \
"PING ip6-localhost (::1): 56 data bytes\n" \
"64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
"\n" \
"--- ip6-localhost ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define pipe_progress_trivial_usage NOUSAGE_STR
#define pipe_progress_full_usage ""
#define pivot_root_trivial_usage \
"NEW_ROOT PUT_OLD"
#define pivot_root_full_usage "\n\n" \
"Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
"the new root file system"
#define pkill_trivial_usage \
"[-l] | [-fnovx] [-signal] pattern"
#define pkill_full_usage "\n\n" \
"Send a signal to process(es) selected by regex pattern\n" \
"\nOptions:" \
"\n -l List all signals" \
"\n -f Match against entire command line" \
"\n -n Signal the newest process only" \