| #!/bin/sh |
| |
| debug=false |
| |
| # Linker flags used: |
| # |
| # Informational: |
| # --warn-common |
| # -Map $EXE.map |
| # --verbose |
| # |
| # Optimizations: |
| # --sort-common reduces padding |
| # --sort-section alignment reduces padding |
| # --gc-sections throws out unused sections, |
| # does not work for shared libs |
| # -On Not used, maybe useful? |
| # |
| # List of files to link: |
| # $l_list == --start-group -llib1 -llib2 --end-group |
| # --start-group $O_FILES $A_FILES --end-group |
| # |
| # Shared library link: |
| # -shared self-explanatory |
| # -fPIC position-independent code |
| # --enable-new-dtags ? |
| # -z,combreloc ? |
| # -soname="libbusybox.so.$BB_VER" |
| # --undefined=lbb_main Seed name to start pulling from |
| # (otherwise we'll need --whole-archive) |
| # -static Not used, but may be useful! manpage: |
| # "... This option can be used with -shared. |
| # Doing so means that a shared library |
| # is being created but that all of the library's |
| # external references must be resolved by pulling |
| # in entries from static libraries." |
| |
| |
| try() { |
| printf "%s\n" "Output of:" >$EXE.out |
| printf "%s\n" "$*" >>$EXE.out |
| printf "%s\n" "==========" >>$EXE.out |
| $debug && echo "Trying: $*" |
| "$@" >>$EXE.out 2>&1 |
| exitcode=$? |
| return $exitcode |
| } |
| |
| check_cc() { |
| if $CC $1 -shared -o /dev/null -xc /dev/null > /dev/null 2>&1; then |
| echo "$1"; |
| else |
| echo "$2"; |
| fi |
| } |
| |
| EXE="$1" |
| CC="$2" |
| LDFLAGS="$3" |
| O_FILES="$4" |
| A_FILES="$5" |
| LDLIBS="$6" |
| |
| # The -Wl,--sort-section option is not supported by older versions of ld |
| SORT_SECTION=`check_cc "-Wl,--sort-section -Wl,alignment" ""` |
| |
| # Sanitize lib list (dups, extra spaces etc) |
| LDLIBS=`echo "$LDLIBS" | xargs -n1 | sort | uniq | xargs` |
| |
| # First link with all libs. If it fails, bail out |
| echo "Trying libraries: $LDLIBS" |
| # "lib1 lib2 lib3" -> "-llib1 -llib2 -llib3" |
| l_list=`echo "$LDLIBS" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'` |
| test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group" |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -Wl,--start-group $O_FILES $A_FILES -Wl,--end-group \ |
| $l_list \ |
| || { |
| echo "Failed: $* $l_list" |
| cat $EXE.out |
| exit 1 |
| } |
| |
| # Now try to remove each lib and build without it. |
| # Stop when no lib can be removed. |
| while test "$LDLIBS"; do |
| $debug && echo "Trying libraries: $LDLIBS" |
| all_needed=true |
| for one in $LDLIBS; do |
| without_one=`echo " $LDLIBS " | sed "s/ $one / /g" | xargs` |
| # "lib1 lib2 lib3" -> "-llib1 -llib2 -llib3" |
| l_list=`echo "$without_one" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'` |
| test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group" |
| $debug && echo "Trying -l options: '$l_list'" |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -Wl,--start-group $O_FILES $A_FILES -Wl,--end-group \ |
| $l_list |
| if test $? = 0; then |
| echo "Library $one is not needed" |
| LDLIBS="$without_one" |
| all_needed=false |
| else |
| echo "Library $one is needed" |
| fi |
| done |
| # All libs were needed, can't remove any |
| $all_needed && break |
| # If there is no space char, the list has just one lib. |
| # I'm not sure that in this case lib really is 100% needed. |
| # Let's try linking without it anyway... thus commented out. |
| #{ echo "$LDLIBS" | grep -q ' '; } || break |
| done |
| |
| # Make the binary with final, minimal list of libs |
| echo "Final link with: $LDLIBS" |
| l_list=`echo "$LDLIBS" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'` |
| test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group" |
| # --verbose gives us gobs of info to stdout (e.g. linker script used) |
| if ! test -f busybox_ldscript; then |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -Wl,--start-group $O_FILES $A_FILES -Wl,--end-group \ |
| $l_list \ |
| -Wl,--warn-common \ |
| -Wl,-Map -Wl,$EXE.map \ |
| -Wl,--verbose \ |
| || { |
| cat $EXE.out |
| exit 1 |
| } |
| else |
| echo "Custom linker script 'busybox_ldscript' found, using it" |
| # Add SORT_BY_ALIGNMENT to linker script (found in $EXE.out): |
| # .rodata : { *(.rodata SORT_BY_ALIGNMENT(.rodata.*) .gnu.linkonce.r.*) } |
| # *(.data SORT_BY_ALIGNMENT(.data.*) .gnu.linkonce.d.*) |
| # *(.bss SORT_BY_ALIGNMENT(.bss.*) .gnu.linkonce.b.*) |
| # This will eliminate most of the padding (~3kb). |
| # Hmm, "ld --sort-section alignment" should do it too. |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -Wl,-T -Wl,busybox_ldscript \ |
| -Wl,--start-group $O_FILES $A_FILES -Wl,--end-group \ |
| $l_list \ |
| -Wl,--warn-common \ |
| -Wl,-Map -Wl,$EXE.map \ |
| -Wl,--verbose \ |
| || { |
| cat $EXE.out |
| exit 1 |
| } |
| fi |
| |
| . ./.config |
| |
| sharedlib_dir="0_lib" |
| |
| if test "$CONFIG_BUILD_LIBBUSYBOX" = y; then |
| mkdir "$sharedlib_dir" 2>/dev/null |
| test -d "$sharedlib_dir" || { |
| echo "Cannot make directory $sharedlib_dir" |
| exit 1 |
| } |
| ln -s "libbusybox.so.$BB_VER" "$sharedlib_dir"/libbusybox.so 2>/dev/null |
| |
| EXE="$sharedlib_dir/libbusybox.so.${BB_VER}_unstripped" |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -shared -fPIC \ |
| -Wl,--enable-new-dtags \ |
| -Wl,-z,combreloc \ |
| -Wl,-soname="libbusybox.so.$BB_VER" \ |
| -Wl,--undefined=lbb_main \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--start-group $A_FILES -Wl,--end-group \ |
| $l_list \ |
| -Wl,--warn-common \ |
| -Wl,-Map -Wl,$EXE.map \ |
| -Wl,--verbose \ |
| || { |
| echo "Linking $EXE failed" |
| cat $EXE.out |
| exit 1 |
| } |
| $STRIP -s --remove-section=.note --remove-section=.comment $EXE -o "$sharedlib_dir/libbusybox.so.$BB_VER" |
| chmod a+x "$sharedlib_dir/libbusybox.so.$BB_VER" |
| echo "libbusybox: $sharedlib_dir/libbusybox.so.$BB_VER" |
| fi |
| |
| if test "$CONFIG_FEATURE_SHARED_BUSYBOX" = y; then |
| EXE="$sharedlib_dir/busybox_unstripped" |
| try $CC $LDFLAGS \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -Wl,--start-group $O_FILES -Wl,--end-group \ |
| -L"$sharedlib_dir" -lbusybox \ |
| -Wl,--warn-common \ |
| -Wl,-Map -Wl,$EXE.map \ |
| -Wl,--verbose \ |
| || { |
| echo "Linking $EXE failed" |
| cat $EXE.out |
| exit 1 |
| } |
| $STRIP -s --remove-section=.note --remove-section=.comment $EXE -o "$sharedlib_dir/busybox" |
| echo "busybox linked against libbusybox: $sharedlib_dir/busybox" |
| fi |
| |
| if test "$CONFIG_FEATURE_INDIVIDUAL" = y; then |
| echo "Linking individual applets against libbusybox (see $sharedlib_dir/*)" |
| gcc -DNAME_MAIN_CNAME -E -include include/autoconf.h include/applets.h \ |
| | grep -v "^#" \ |
| | grep -v "^$" \ |
| > applet_lst.tmp |
| while read name main junk; do |
| |
| echo "\ |
| void lbb_prepare(const char *applet, char **argv); |
| int $main(int argc, char **argv); |
| |
| int main(int argc, char **argv) |
| { |
| lbb_prepare(\"$name\", argv); |
| return $main(argc, argv); |
| } |
| " >"$sharedlib_dir/applet.c" |
| |
| EXE="$sharedlib_dir/$name" |
| try $CC $LDFLAGS "$sharedlib_dir/applet.c" \ |
| -o $EXE \ |
| -Wl,--sort-common \ |
| $SORT_SECTION \ |
| -Wl,--gc-sections \ |
| -L"$sharedlib_dir" -lbusybox \ |
| -Wl,--warn-common \ |
| || { |
| echo "Linking $EXE failed" |
| cat $EXE.out |
| exit 1 |
| } |
| rm -- "$sharedlib_dir/applet.c" $EXE.out |
| $STRIP -s --remove-section=.note --remove-section=.comment $EXE |
| |
| done <applet_lst.tmp |
| fi |
| |
| # libbusybox.so is needed only for -lbusybox at link time, |
| # it is not needed at runtime. Deleting to reduce confusion. |
| rm "$sharedlib_dir"/libbusybox.so 2>/dev/null |
| exit 0 # or else we may confuse make |