blob: 3785100634495f0e2d3b95a222bd8239b4ad819e [file] [log] [blame]
/* vi: set sw=4 ts=4: */
/*
* universal getopt32 implementation for busybox
*
* Copyright (C) 2003-2005 Vladimir Oleynik <dzo@simtreas.ru>
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
#if ENABLE_LONG_OPTS
# include <getopt.h>
#endif
#include "libbb.h"
//kbuild:lib-y += getopt32.o
/* Documentation
uint32_t
getopt32(char **argv, const char *applet_opts, ...)
The command line options are passed as the applet_opts string.
If one of the given options is found, a flag value is added to
the return value.
The flag value is determined by the position of the char in
applet_opts string. For example:
flags = getopt32(argv, "rnug");
"r" will set 1 (bit 0)
"n" will set 2 (bit 1)
"u" will set 4 (bit 2)
"g" will set 8 (bit 3)
and so on. You can also look at the return value as a bit
field and each option sets one bit.
On exit, global variable optind is set so that if you
will do argc -= optind; argv += optind; then
argc will be equal to number of remaining non-option
arguments, first one would be in argv[0], next in argv[1] and so on
(options and their parameters will be moved into argv[]
positions prior to argv[optind]).
"o:" If one of the options requires an argument, then add a ":"
after the char in applet_opts and provide a pointer to store
the argument. For example:
char *pointer_to_arg_for_a;
char *pointer_to_arg_for_b;
char *pointer_to_arg_for_c;
char *pointer_to_arg_for_d;
flags = getopt32(argv, "a:b:c:d:",
&pointer_to_arg_for_a, &pointer_to_arg_for_b,
&pointer_to_arg_for_c, &pointer_to_arg_for_d);
The type of the pointer may be controlled by "o::" or "o+" in
the external string opt_complementary (see below for more info).
"o::" If option can have an *optional* argument, then add a "::"
after its char in applet_opts and provide a pointer to store
the argument. Note that optional arguments _must_
immediately follow the option: -oparam, not -o param.
"o:+" This means that the parameter for this option is a nonnegative integer.
It will be processed with xatoi_positive() - allowed range
is 0..INT_MAX.
int param; // "unsigned param;" will also work
getopt32(argv, "p:+", &param);
"o:*" This means that the option can occur multiple times. Each occurrence
will be saved as a llist_t element instead of char*.
For example:
The grep applet can have one or more "-e pattern" arguments.
In this case you should use getopt32() as follows:
llist_t *patterns = NULL;
(this pointer must be initializated to NULL if the list is empty
as required by llist_add_to_end(llist_t **old_head, char *new_item).)
getopt32(argv, "e:*", &patterns);
$ grep -e user -e root /etc/passwd
root:x:0:0:root:/root:/bin/bash
user:x:500:500::/home/user:/bin/bash
"+" If the first character in the applet_opts string is a plus,
then option processing will stop as soon as a non-option is
encountered in the argv array. Useful for applets like env
which should not process arguments to subprograms:
env -i ls -d /
Here we want env to process just the '-i', not the '-d'.
"!" Report bad options, missing required options,
inconsistent options with all-ones return value (instead of abort).
"^" options string is "^optchars""\0""opt_complementary".
uint32_t
getopt32long(char **argv, const char *applet_opts, const char *logopts...)
This allows you to define long options:
static const char applet_longopts[] ALIGN1 =
//"name\0" has_arg val
"verbose\0" No_argument "v"
;
opt = getopt32long(argv, applet_opts, applet_longopts, ...);
The last element (val) typically is set to
matching short option from applet_opts. If there is no matching
char in applet_opts, then:
- return bit has next position after short options
- if has_arg is not "No_argument", use ptr for arg also
- opt_complementary affects it too
Note: a good applet will make long options configurable via the
config process and not a required feature. The current standard
is to name the config option CONFIG_FEATURE_<applet>_LONG_OPTIONS.
opt_complementary - option modifiers.
":" The colon (":") is used to separate groups of two or more chars
and/or groups of chars and special characters (stating some
conditions to be checked).
"abc" If groups of two or more chars are specified, the first char
is the main option and the other chars are secondary options.
Their flags will be turned on if the main option is found even
if they are not specified on the command line. For example:
flags = getopt32(argv, "^abcd""\0""abc")
If getopt() finds "-a" on the command line, then
getopt32's return value will be as if "-a -b -c" were
found.
"ww" Adjacent double options have a counter associated which indicates
the number of occurrences of the option.
For example the ps applet needs:
if w is given once, GNU ps sets the width to 132,
if w is given more than once, it is "unlimited"
int w_counter = 0; // must be initialized!
getopt32(argv, "^w""\0""ww", &w_counter);
if (w_counter)
width = (w_counter == 1) ? 132 : INT_MAX;
else
get_terminal_width(...&width...);
w_counter is a pointer to an integer. It has to be passed to
getopt32() after all other option argument sinks.
For example: accept multiple -v to indicate the level of verbosity
and for each -b optarg, add optarg to my_b. Finally, if b is given,
turn off c and vice versa:
llist_t *my_b = NULL;
int verbose_level = 0;
f = getopt32(argv, "^vb:*c"
"\0""vv:b-c:c-b"
, &my_b, &verbose_level);
if (f & 2) // -c after -b unsets -b flag
while (my_b) dosomething_with(llist_pop(&my_b));
if (my_b) // but llist is stored if -b is specified
free_llist(my_b);
if (verbose_level) printf("verbose level is %d\n", verbose_level);
Special characters:
"-N" A dash as the first char in a opt_complementary group followed
by a single digit (0-9) means that at least N non-option
arguments must be present on the command line
"=N" An equal sign as the first char in a opt_complementary group followed
by a single digit (0-9) means that exactly N non-option
arguments must be present on the command line
"?N" A "?" as the first char in a opt_complementary group followed
by a single digit (0-9) means that at most N arguments must be present
on the command line.
"V-" An option with dash before colon or end-of-line results in
bb_show_usage() being called if this option is encountered.
This is typically used to implement "print verbose usage message
and exit" option.
"a-b" A dash between two options causes the second of the two
to be unset (and ignored) if it is given on the command line.
[FIXME: what if they are the same? like "x-x"? Is it ever useful?]
For example:
The du applet has the options "-s" and "-d depth". If
getopt32 finds -s, then -d is unset or if it finds -d
then -s is unset. (Note: busybox implements the GNU
"--max-depth" option as "-d".) To obtain this behavior, you
set opt_complementary to "s-d:d-s". Only one flag value is
added to getopt32's return value depending on the
position of the options on the command line. If one of the
two options requires an argument pointer (":" in applet_opts
as in "d:") optarg is set accordingly.
char *smax_print_depth;
opt = getopt32(argv, "^sd:x""\0""s-d:d-s:x-x", &smax_print_depth);
if (opt & 2)
max_print_depth = atoi(smax_print_depth);
if (opt & 4)
printf("Detected odd -x usage\n");
"a--b" A double dash between two options, or between an option and a group
of options, means that they are mutually exclusive. Unlike
the "-" case above, an error will be forced if the options
are used together.
For example:
The cut applet must have only one type of list specified, so
-b, -c and -f are mutually exclusive and should raise an error
if specified together. In this case you must set
opt_complementary to "b--cf:c--bf:f--bc". If two of the
mutually exclusive options are found, getopt32 will call
bb_show_usage() and die.
"x--x" Variation of the above, it means that -x option should occur
at most once.
"o+" A plus after a char in opt_complementary means that the parameter
for this option is a nonnegative integer. It will be processed
with xatoi_positive() - allowed range is 0..INT_MAX.
int param; // "unsigned param;" will also work
getopt32(argv, "^p:""\0""p+", &param);
"o::" A double colon after a char in opt_complementary means that the
option can occur multiple times. Each occurrence will be saved as
a llist_t element instead of char*.
For example:
The grep applet can have one or more "-e pattern" arguments.
In this case you should use getopt32() as follows:
llist_t *patterns = NULL;
(this pointer must be initializated to NULL if the list is empty
as required by llist_add_to_end(llist_t **old_head, char *new_item).)
getopt32(argv, "^e:""\0""e::", &patterns);
$ grep -e user -e root /etc/passwd
root:x:0:0:root:/root:/bin/bash
user:x:500:500::/home/user:/bin/bash
"o+" and "o::" can be handled by "o:+" and "o:*" specifiers
in option string (and it is preferred), but this does not work
for "long options only" cases, such as tar --exclude=PATTERN,
wget --header=HDR cases.
"a?b" A "?" between an option and a group of options means that
at least one of them is required to occur if the first option
occurs in preceding command line arguments.
For example from "id" applet:
// Don't allow -n -r -rn -ug -rug -nug -rnug
flags = getopt32(argv, "^rnug""\0""r?ug:n?ug:u--g:g--u");
This example allowed only:
$ id; id -u; id -g; id -ru; id -nu; id -rg; id -ng; id -rnu; id -rng
"X" A opt_complementary group with just a single letter means
that this option is required. If more than one such group exists,
at least one option is required to occur (not all of them).
For example from "start-stop-daemon" applet:
// Don't allow -KS -SK, but -S or -K is required
flags = getopt32(argv, "^KS...""\0""K:S:K--S:S--K");
Don't forget to use ':'. For example, "?322-22-23X-x-a"
is interpreted as "?3:22:-2:2-2:2-3Xa:2--x" -
max 3 args; count uses of '-2'; min 2 args; if there is
a '-2' option then unset '-3', '-X' and '-a'; if there is
a '-2' and after it a '-x' then error out.
But it's far too obfuscated. Use ':' to separate groups.
*/
/* Code here assumes that 'unsigned' is at least 32 bits wide */
const char *const bb_argv_dash[] = { "-", NULL };
enum {
PARAM_STRING,
PARAM_LIST,
PARAM_INT,
};
typedef struct {
unsigned char opt_char;
smallint param_type;
unsigned switch_on;
unsigned switch_off;
unsigned incongruously;
unsigned requires;
void **optarg; /* char**, llist_t** or int *. */
int *counter;
} t_complementary;
uint32_t option_mask32;
#if ENABLE_LONG_OPTS
static const struct option bb_null_long_options[1] = {
{ 0, 0, 0, 0 }
};
#else
#define vgetopt32(argv,applet_opts,applet_long_options,p) \
vgetopt32(argv,applet_opts,p)
#endif
/* Please keep getopt32 free from xmalloc */
static uint32_t
vgetopt32(char **argv, const char *applet_opts, const char *applet_long_options, va_list p)
{
int argc;
unsigned flags = 0;
unsigned requires = 0;
unsigned len;
t_complementary complementary[33]; /* last stays zero-filled */
char dont_die_flag;
int c;
const unsigned char *s;
const char *opt_complementary;
t_complementary *on_off;
#if ENABLE_LONG_OPTS
const struct option *l_o;
struct option *long_options = (struct option *) &bb_null_long_options;
#endif
unsigned trigger;
int min_arg = 0;
int max_arg = -1;
int spec_flgs = 0;
#define SHOW_USAGE_IF_ERROR 1
on_off = complementary;
memset(on_off, 0, sizeof(complementary));
len = strlen(applet_opts);
/* skip bbox extension */
opt_complementary = NULL;
if (applet_opts[0] == '^') {
applet_opts++;
/* point it past terminating NUL */
opt_complementary = applet_opts + len;
}
/* skip another bbox extension */
dont_die_flag = applet_opts[0];
if (dont_die_flag == '!')
applet_opts++;
applet_opts = strcpy(alloca(len + 1), applet_opts);
/* skip GNU extension */
s = (const unsigned char *)applet_opts;
if (*s == '+' || *s == '-')
s++;
c = 0;
while (*s) {
if (c >= 32)
break;
on_off->opt_char = *s;
on_off->switch_on = (1U << c);
if (*++s == ':') {
on_off->optarg = va_arg(p, void **);
if (s[1] == '+' || s[1] == '*') {
/* 'o:+' or 'o:*' */
on_off->param_type = (s[1] == '+') ?
PARAM_INT : PARAM_LIST;
overlapping_strcpy((char*)s + 1, (char*)s + 2);
}
/* skip possible 'o::' (or 'o:+:' !) */
while (*++s == ':')
continue;
}
on_off++;
c++;
}
#if ENABLE_LONG_OPTS
if (applet_long_options) {
const char *optstr;
unsigned i, count;
count = 1;
optstr = applet_long_options;
while (optstr[0]) {
optstr += strlen(optstr) + 3; /* skip NUL, has_arg, val */
count++;
}
/* count == no. of longopts + 1 */
long_options = alloca(count * sizeof(*long_options));
memset(long_options, 0, count * sizeof(*long_options));
i = 0;
optstr = applet_long_options;
while (--count) {
long_options[i].name = optstr;
optstr += strlen(optstr) + 1;
long_options[i].has_arg = (unsigned char)(*optstr++);
/* long_options[i].flag = NULL; */
long_options[i].val = (unsigned char)(*optstr++);
i++;
}
for (l_o = long_options; l_o->name; l_o++) {
if (l_o->flag)
continue;
for (on_off = complementary; on_off->opt_char; on_off++)
if (on_off->opt_char == l_o->val)
goto next_long;
if (c >= 32)
break;
on_off->opt_char = l_o->val;
on_off->switch_on = (1U << c);
if (l_o->has_arg != no_argument)
on_off->optarg = va_arg(p, void **);
c++;
next_long: ;
}
}
#endif /* ENABLE_LONG_OPTS */
s = (const unsigned char *)opt_complementary;
if (s) for (; *s; s++) {
t_complementary *pair;
unsigned *pair_switch;
if (*s == ':')
continue;
c = s[1];
if (*s == '?') {
if (c < '0' || c > '9') {
spec_flgs |= SHOW_USAGE_IF_ERROR;
} else {
max_arg = c - '0';
s++;
}
continue;
}
if (*s == '-') {
if (c >= '0' && c <= '9') {
min_arg = c - '0';
s++;
}
continue;
}
if (*s == '=') {
min_arg = max_arg = c - '0';
s++;
continue;
}
for (on_off = complementary; on_off->opt_char; on_off++)
if (on_off->opt_char == *s)
goto found_opt;
/* Without this, diagnostic of such bugs is not easy */
bb_error_msg_and_die("NO OPT %c!", *s);
found_opt:
if (c == ':' && s[2] == ':') {
on_off->param_type = PARAM_LIST;
continue;
}
if (c == '+' && (s[2] == ':' || s[2] == '\0')) {
on_off->param_type = PARAM_INT;
s++;
continue;
}
if (c == ':' || c == '\0') {
requires |= on_off->switch_on;
continue;
}
if (c == '-' && (s[2] == ':' || s[2] == '\0')) {
flags |= on_off->switch_on;
on_off->incongruously |= on_off->switch_on;
s++;
continue;
}
if (c == *s) {
on_off->counter = va_arg(p, int *);
s++;
}
pair = on_off;
pair_switch = &pair->switch_on;
for (s++; *s && *s != ':'; s++) {
if (*s == '?') {
pair_switch = &pair->requires;
} else if (*s == '-') {
if (pair_switch == &pair->switch_off)
pair_switch = &pair->incongruously;
else
pair_switch = &pair->switch_off;
} else {
for (on_off = complementary; on_off->opt_char; on_off++)
if (on_off->opt_char == *s) {
*pair_switch |= on_off->switch_on;
break;
}
}
}
s--;
}
/* In case getopt32 was already called:
* reset libc getopt() internal state.
* run_nofork_applet() does this, but we might end up here
* also via gunzip_main() -> gzip_main(). Play safe.
*/
GETOPT_RESET();
/* skip 0: some applets cheat: they do not actually HAVE argv[0] */
argc = 1 + string_array_len(argv + 1);
/* Note: just "getopt() <= 0" will not work well for
* "fake" short options, like this one:
* wget $'-\203' "Test: test" http://kernel.org/
* (supposed to act as --header, but doesn't) */
#if ENABLE_LONG_OPTS
while ((c = getopt_long(argc, argv, applet_opts,
long_options, NULL)) != -1) {
#else
while ((c = getopt(argc, argv, applet_opts)) != -1) {
#endif
/* getopt prints "option requires an argument -- X"
* and returns '?' if an option has no arg, but one is reqd */
c &= 0xff; /* fight libc's sign extension */
for (on_off = complementary; on_off->opt_char != c; on_off++) {
/* c can be NUL if long opt has non-NULL ->flag,
* but we construct long opts so that flag
* is always NULL (see above) */
if (on_off->opt_char == '\0' /* && c != '\0' */) {
/* c is probably '?' - "bad option" */
goto error;
}
}
if (flags & on_off->incongruously)
goto error;
trigger = on_off->switch_on & on_off->switch_off;
flags &= ~(on_off->switch_off ^ trigger);
flags |= on_off->switch_on ^ trigger;
flags ^= trigger;
if (on_off->counter)
(*(on_off->counter))++;
if (optarg) {
if (on_off->param_type == PARAM_LIST) {
llist_add_to_end((llist_t **)(on_off->optarg), optarg);
} else if (on_off->param_type == PARAM_INT) {
//TODO: xatoi_positive indirectly pulls in printf machinery
*(unsigned*)(on_off->optarg) = xatoi_positive(optarg);
} else if (on_off->optarg) {
*(char **)(on_off->optarg) = optarg;
}
}
}
/* check depending requires for given options */
for (on_off = complementary; on_off->opt_char; on_off++) {
if (on_off->requires
&& (flags & on_off->switch_on)
&& (flags & on_off->requires) == 0
) {
goto error;
}
}
if (requires && (flags & requires) == 0)
goto error;
argc -= optind;
if (argc < min_arg || (max_arg >= 0 && argc > max_arg))
goto error;
option_mask32 = flags;
return flags;
error:
if (dont_die_flag != '!')
bb_show_usage();
return (int32_t)-1;
}
uint32_t FAST_FUNC
getopt32(char **argv, const char *applet_opts, ...)
{
uint32_t opt;
va_list p;
va_start(p, applet_opts);
opt = vgetopt32(argv, applet_opts, NULL, p);
va_end(p);
return opt;
}
#if ENABLE_LONG_OPTS
uint32_t FAST_FUNC
getopt32long(char **argv, const char *applet_opts, const char *longopts, ...)
{
uint32_t opt;
va_list p;
va_start(p, longopts);
opt = vgetopt32(argv, applet_opts, longopts, p);
va_end(p);
return opt;
}
#endif