diff --git a/Changelog b/Changelog
index df0e8d3..ad15c25 100644
--- a/Changelog
+++ b/Changelog
@@ -1,1789 +1,406 @@
 ---------------------
-PatchSet 3976 
-Date: 2004/03/09 21:27:32
+PatchSet 4054 
+Date: 2004/04/07 15:19:26
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-David Anders (prpplague) submitted this patch to allow login to work
-when the device nodes are symlinks on a read only file system.
+Update changelog for release
 
 Members: 
-	loginutils/login.c:1.13->1.14 
+	Changelog:1.290->1.291 
 
 ---------------------
-PatchSet 3977 
-Date: 2004/03/09 21:32:57
+PatchSet 4055 
+Date: 2004/04/07 15:19:41
+Author: andersen
+Branch: HEAD
+Tag: busybox_1_00_pre9 
+Log:
+Update for release
+
+Members: 
+	docs/busybox.net/news.html:1.12->1.13 
+
+---------------------
+PatchSet 4056 
+Date: 2004/04/07 16:07:55
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Note that /proc must be mounted for filesystem type autodetection
-to work.  Without /proc mounted, one must explicitly specify the
-type of every filesystem being mounted.
+Document insmod -o
 
 Members: 
-	include/usage.h:1.192->1.193 
+	include/usage.h:1.201->1.202 
 
 ---------------------
-PatchSet 3978 
-Date: 2004/03/10 07:42:37
-Author: mjn3
-Branch: HEAD
-Tag: (none) 
-Log:
-In spite of the feature freeze, check in a complete rework of route which
-fixes some bugs, adds some error checking, and removes _lots_ of bloat.
-Text size on i386...
-              old     new
-   ipv6      5425    3523
-   no ipv6   3143    2193
-
-Members: 
-	include/inet_common.h:1.3->1.4 
-	include/usage.h:1.193->1.194 
-	libbb/inet_common.c:1.7->1.8 
-	networking/route.c:1.23->1.24 
-
----------------------
-PatchSet 3979 
-Date: 2004/03/10 09:10:53
-Author: bug1
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch by Seth W. Klein, the -l switch was reversed
-
-Members: 
-	coreutils/du.c:1.58->1.59 
-
----------------------
-PatchSet 3980 
-Date: 2004/03/10 09:58:51
-Author: bug1
-Branch: HEAD
-Tag: (none) 
-Log:
-When displaying the size in 1kB blocks round up if an odd number of
-blocks
-
-Members: 
-	coreutils/du.c:1.59->1.60 
-
----------------------
-PatchSet 3981 
-Date: 2004/03/10 10:47:37
-Author: bug1
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from Thomas Frohlich to fix an option ordering bug of mine.
-
-Members: 
-	util-linux/hwclock.c:1.8->1.9 
-
----------------------
-PatchSet 3982 
-Date: 2004/03/11 13:34:24
+PatchSet 4057 
+Date: 2004/04/07 17:59:59
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Paul Mundt, lethal at linux-sh dot org writes:
-
-Here's a follow-up replacement to the patch I sent earlier, this adjusts some
-of the semantics of the dynamic variable setting. Namely, dynamic vars can hook
-a set handler (which RANDOM uses to adjust the seed). They'll only lose their
-dynamic status if they're unset.
-
-I've used the same approach that bash does to come up with the random number,
-mostly just for consistency.
-
-For example:
-
-$ echo $RANDOM
-13759
-$ echo $RANDOM
-20057
-$ echo $RANDOM
-1502
-$ export RANDOM=42
-$ echo $RANDOM
-24179
-$ echo $RANDOM
-2046
-$ unset RANDOM
-$ echo $RANDOM
-
-$ export RANDOM=42
-$ echo $RANDOM
-42
-$
+Add the Tritton Technologies NAS120
 
 Members: 
-	shell/ash.c:1.90->1.91 
+	docs/busybox.net/shame.html:1.13->1.14 
 
 ---------------------
-PatchSet 3983 
-Date: 2004/03/12 22:07:10
+PatchSet 4058 
+Date: 2004/04/07 18:59:04
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Fix awk entry, which was not showing up in BusyBox.txt for some reason
+Vladimir N. Oleynik writes:
 
-Members: 
-	include/usage.h:1.194->1.195 
+Hi.
 
----------------------
-PatchSet 3984 
-Date: 2004/03/12 22:08:13
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Add prototypes for safe_strtol and friends
+Last changes (rev 1.12) to recursive_actions() by Christian Grigis
+have problem.
+Test for demonstrate:
 
-Members: 
-	include/libbb.h:1.127->1.128 
+$ mkdir aaa bbb ccc
+$ su
+# chown root bbb
+# chmod 700 bbb
+# exit
+$ busybox chmod 777 -R .
+./bbb: Permision denied
 
----------------------
-PatchSet 3985 
-Date: 2004/03/12 22:08:42
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix some goofy formatting
-
-Members: 
-	shell/lash.c:1.155->1.156 
-
----------------------
-PatchSet 3986 
-Date: 2004/03/12 22:10:40
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Hideki IWAMOTO writes:
-
-Current `tr' implementation has a problem, if `plain char' is signed.
-
-[current cvs version]
-
->echo a | _install/usr/bin/tr '\0' '\377'
-Segmentation fault (core dumped)
-
-[patched version]
-
->echo a | _install/usr/bin/tr '\0' '\377'
-a
-
-Members: 
-	coreutils/tr.c:1.36->1.37 
-
----------------------
-PatchSet 3987 
-Date: 2004/03/13 08:32:14
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix some doc generation problems
-
-Members: 
-	docs/autodocifier.pl:1.24->1.25 
-	docs/busybox_footer.pod:1.12->1.13 
-
----------------------
-PatchSet 3988 
-Date: 2004/03/13 08:33:10
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Update docs for start_stop_daemon to match reality.  Update
-the reality a bit to better match debian behavior.
-
-Members: 
-	debianutils/start_stop_daemon.c:1.12->1.13 
-	include/applets.h:1.111->1.112 
-	include/usage.h:1.195->1.196 
-
----------------------
-PatchSet 3989 
-Date: 2004/03/13 18:17:37
-Author: mjn3
-Branch: HEAD
-Tag: (none) 
-Log:
-I redid route.
-
-Members: 
-	AUTHORS:1.40->1.41 
-
----------------------
-PatchSet 3990 
-Date: 2004/03/15 08:28:13
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Remove trailing whitespace.  Update copyright to include 2004.
-
-Members: 
-	AUTHORS:1.41->1.42 
-	Changelog:1.289->1.290 
-	INSTALL:1.3->1.4 
-	Makefile:1.289->1.290 
-	README:1.30->1.31 
-	Rules.mak:1.28->1.29 
-	TODO:1.86->1.87 
-	applets/Makefile:1.4->1.5 
-	applets/Makefile.in:1.3->1.4 
-	applets/applets.c:1.23->1.24 
-	applets/busybox.c:1.144->1.145 
-	archival/Config.in:1.14->1.15 
-	archival/Makefile:1.6->1.7 
-	archival/Makefile.in:1.4->1.5 
-	archival/ar.c:1.47->1.48 
-	archival/cpio.c:1.14->1.15 
-	archival/dpkg.c:1.75->1.76 
-	archival/dpkg_deb.c:1.31->1.32 
-	archival/gunzip.c:1.78->1.79 
-	archival/gzip.c:1.61->1.62 
-	archival/rpm.c:1.5->1.6 
-	archival/rpm2cpio.c:1.11->1.12 
-	archival/tar.c:1.187->1.188 
-	archival/libunarchive/Makefile:1.4->1.5 
-	archival/libunarchive/Makefile.in:1.21->1.22 
-	archival/libunarchive/data_extract_all.c:1.18->1.19 
-	archival/libunarchive/decompress_bunzip2.c:1.11->1.12 
-	archival/libunarchive/decompress_uncompress.c:1.9->1.10 
-	archival/libunarchive/decompress_unzip.c:1.32->1.33 
-	archival/libunarchive/filter_accept_list_reassign.c:1.4->1.5 
-	archival/libunarchive/get_header_ar.c:1.8->1.9 
-	archival/libunarchive/get_header_cpio.c:1.8->1.9 
-	archival/libunarchive/get_header_tar.c:1.35->1.36 
-	archival/libunarchive/uncompress.c:1.9->1.10 
-	archival/libunarchive/unzip.c:1.32->1.33 
-	console-tools/Makefile:1.3->1.4 
-	console-tools/Makefile.in:1.4->1.5 
-	console-tools/chvt.c:1.21->1.22 
-	console-tools/clear.c:1.17->1.18 
-	console-tools/deallocvt.c:1.28->1.29 
-	console-tools/dumpkmap.c:1.17->1.18 
-	console-tools/loadkmap.c:1.27->1.28 
-	console-tools/openvt.c:1.7->1.8 
-	console-tools/reset.c:1.12->1.13 
-	console-tools/setkeycodes.c:1.14->1.15 
-	coreutils/Config.in:1.23->1.24 
-	coreutils/Makefile:1.2->1.3 
-	coreutils/Makefile.in:1.8->1.9 
-	coreutils/basename.c:1.22->1.23 
-	coreutils/cal.c:1.8->1.9 
-	coreutils/chgrp.c:1.17->1.18 
-	coreutils/chmod.c:1.16->1.17 
-	coreutils/chown.c:1.25->1.26 
-	coreutils/chroot.c:1.30->1.31 
-	coreutils/cut.c:1.27->1.28 
-	coreutils/date.c:1.44->1.45 
-	coreutils/df.c:1.55->1.56 
-	coreutils/dirname.c:1.19->1.20 
-	coreutils/dos2unix.c:1.17->1.18 
-	coreutils/du.c:1.60->1.61 
-	coreutils/echo.c:1.17->1.18 
-	coreutils/expr.c:1.16->1.17 
-	coreutils/false.c:1.3->1.4 
-	coreutils/id.c:1.23->1.24 
-	coreutils/install.c:1.8->1.9 
-	coreutils/ln.c:1.44->1.45 
-	coreutils/ls.c:1.106->1.107 
-	coreutils/md5_sha1_sum.c:1.5->1.6 
-	coreutils/mknod.c:1.25->1.26 
-	coreutils/mv.c:1.20->1.21 
-	coreutils/printf.c:1.21->1.22 
-	coreutils/rmdir.c:1.23->1.24 
-	coreutils/tail.c:1.46->1.47 
-	coreutils/tee.c:1.23->1.24 
-	coreutils/test.c:1.24->1.25 
-	coreutils/touch.c:1.27->1.28 
-	coreutils/tr.c:1.37->1.38 
-	coreutils/true.c:1.3->1.4 
-	coreutils/uudecode.c:1.21->1.22 
-	coreutils/wc.c:1.27->1.28 
-	coreutils/who.c:1.2->1.3 
-	coreutils/libcoreutils/Makefile:1.2->1.3 
-	coreutils/libcoreutils/Makefile.in:1.2->1.3 
-	debian/changelog:1.39->1.40 
-	debian/control:1.19->1.20 
-	debianutils/Config.in:1.6->1.7 
-	debianutils/Makefile:1.2->1.3 
-	debianutils/Makefile.in:1.4->1.5 
-	debianutils/mktemp.c:1.3->1.4 
-	debianutils/run_parts.c:1.6->1.7 
-	debianutils/which.c:1.8->1.9 
-	docs/busybox.sgml:1.53->1.54 
-	docs/busybox_header.pod:1.12->1.13 
-	docs/contributing.txt:1.9->1.10 
-	docs/new-applet-HOWTO.txt:1.8->1.9 
-	docs/style-guide.txt:1.16->1.17 
-	docs/busybox.net/about.html:1.1->1.2 
-	docs/busybox.net/busybox-growth.ps:1.1->1.2 
-	docs/busybox.net/copyright.txt:1.1->1.2 
-	docs/busybox.net/cvs_anon.html:1.10->1.11 
-	docs/busybox.net/cvs_howto.html:1.1->1.2 
-	docs/busybox.net/cvs_write.html:1.8->1.9 
-	docs/busybox.net/docs.html:1.1->1.2 
-	docs/busybox.net/download.html:1.1->1.2 
-	docs/busybox.net/footer.html:1.2->1.3 
-	docs/busybox.net/header.html:1.7->1.8 
-	docs/busybox.net/license.html:1.2->1.3 
-	docs/busybox.net/lists.html:1.2->1.3 
-	docs/busybox.net/news.html:1.11->1.12 
-	docs/busybox.net/oldnews.html:1.20->1.21 
-	docs/busybox.net/screenshot.html:1.9->1.10 
-	docs/busybox.net/images/busybox.png:1.1->1.2 
-	docs/busybox.net/images/ltbutton2.png:1.1->1.2 
-	editors/Config.in:1.9->1.10 
-	editors/Makefile:1.3->1.4 
-	editors/Makefile.in:1.4->1.5 
-	editors/awk.c:1.6->1.7 
-	editors/patch.c:1.1->1.2 
-	editors/sed.c:1.160->1.161 
-	editors/vi.c:1.33->1.34 
-	examples/busybox.spec:1.40->1.41 
-	examples/depmod.pl:1.3->1.4 
-	examples/inittab:1.8->1.9 
-	examples/undeb:1.2->1.3 
-	examples/unrpm:1.3->1.4 
-	examples/bootfloppy/bootfloppy.txt:1.3->1.4 
-	examples/bootfloppy/mkrootfs.sh:1.3->1.4 
-	examples/bootfloppy/syslinux.cfg:1.1->1.2 
-	examples/bootfloppy/etc/profile:1.1->1.2 
-	examples/udhcp/udhcpd.conf:1.2->1.3 
-	findutils/Config.in:1.9->1.10 
-	findutils/Makefile:1.3->1.4 
-	findutils/Makefile.in:1.3->1.4 
-	findutils/find.c:1.39->1.40 
-	findutils/grep.c:1.80->1.81 
-	findutils/xargs.c:1.33->1.34 
-	include/busybox.h:1.55->1.56 
-	include/libbb.h:1.128->1.129 
-	include/unarchive.h:1.22->1.23 
-	init/Makefile:1.4->1.5 
-	init/Makefile.in:1.7->1.8 
-	init/halt.c:1.23->1.24 
-	init/init.c:1.198->1.199 
-	init/init_shared.c:1.4->1.5 
-	init/poweroff.c:1.20->1.21 
-	init/reboot.c:1.31->1.32 
-	libbb/Makefile:1.9->1.10 
-	libbb/README:1.3->1.4 
-	libbb/bb_asprintf.c:1.3->1.4 
-	libbb/chomp.c:1.8->1.9 
-	libbb/concat_path_file.c:1.11->1.12 
-	libbb/copyfd.c:1.11->1.12 
-	libbb/correct_password.c:1.2->1.3 
-	libbb/device_open.c:1.4->1.5 
-	libbb/dump.c:1.8->1.9 
-	libbb/error_msg.c:1.5->1.6 
-	libbb/error_msg_and_die.c:1.4->1.5 
-	libbb/fgets_str.c:1.6->1.7 
-	libbb/find_mount_point.c:1.4->1.5 
-	libbb/find_pid_by_name.c:1.13->1.14 
-	libbb/find_root_device.c:1.11->1.12 
-	libbb/full_read.c:1.5->1.6 
-	libbb/full_write.c:1.5->1.6 
-	libbb/get_console.c:1.8->1.9 
-	libbb/get_line_from_file.c:1.6->1.7 
-	libbb/get_terminal_width_height.c:1.1->1.2 
-	libbb/hash_fd.c:1.5->1.6 
-	libbb/herror_msg.c:1.4->1.5 
-	libbb/herror_msg_and_die.c:1.5->1.6 
-	libbb/human_readable.c:1.8->1.9 
-	libbb/inode_hash.c:1.6->1.7 
-	libbb/interface.c:1.20->1.21 
-	libbb/isdirectory.c:1.4->1.5 
-	libbb/kernel_version.c:1.4->1.5 
-	libbb/loop.c:1.7->1.8 
-	libbb/messages.c:1.11->1.12 
-	libbb/module_syscalls.c:1.15->1.16 
-	libbb/mtab.c:1.4->1.5 
-	libbb/mtab_file.c:1.8->1.9 
-	libbb/my_getgrgid.c:1.6->1.7 
-	libbb/my_getgrnam.c:1.6->1.7 
-	libbb/my_getpwnam.c:1.6->1.7 
-	libbb/my_getpwnamegid.c:1.6->1.7 
-	libbb/my_getpwuid.c:1.6->1.7 
-	libbb/parse_mode.c:1.6->1.7 
-	libbb/parse_number.c:1.3->1.4 
-	libbb/perror_msg.c:1.4->1.5 
-	libbb/perror_msg_and_die.c:1.4->1.5 
-	libbb/print_file.c:1.8->1.9 
-	libbb/printf.c:1.3->1.4 
-	libbb/process_escape_sequence.c:1.4->1.5 
-	libbb/pw_encrypt.c:1.3->1.4 
-	libbb/read_package_field.c:1.8->1.9 
-	libbb/recursive_action.c:1.10->1.11 
-	libbb/run_parts.c:1.10->1.11 
-	libbb/run_shell.c:1.5->1.6 
-	libbb/safe_read.c:1.3->1.4 
-	libbb/safe_strncpy.c:1.3->1.4 
-	libbb/safe_write.c:1.2->1.3 
-	libbb/setup_environment.c:1.3->1.4 
-	libbb/syscalls.c:1.12->1.13 
-	libbb/syslog_msg_with_name.c:1.5->1.6 
-	libbb/trim.c:1.7->1.8 
-	libbb/u_signal_names.c:1.3->1.4 
-	libbb/vdprintf.c:1.4->1.5 
-	libbb/verror_msg.c:1.5->1.6 
-	libbb/vfork_daemon_rexec.c:1.2->1.3 
-	libbb/vherror_msg.c:1.6->1.7 
-	libbb/vperror_msg.c:1.4->1.5 
-	libbb/wfopen.c:1.4->1.5 
-	libbb/xconnect.c:1.12->1.13 
-	libbb/xfuncs.c:1.13->1.14 
-	libbb/xgetlarg.c:1.4->1.5 
-	libbb/xgetularg.c:1.1->1.2 
-	libbb/xreadlink.c:1.4->1.5 
-	libbb/xregcomp.c:1.4->1.5 
-	libpwdgrp/Makefile:1.2->1.3 
-	libpwdgrp/Makefile.in:1.2->1.3 
-	libpwdgrp/__getgrent.c:1.5->1.6 
-	libpwdgrp/__getpwent.c:1.3->1.4 
-	libpwdgrp/fgetgrent.c:1.3->1.4 
-	libpwdgrp/fgetpwent.c:1.2->1.3 
-	libpwdgrp/getgrgid.c:1.4->1.5 
-	libpwdgrp/getgrnam.c:1.4->1.5 
-	libpwdgrp/getpw.c:1.2->1.3 
-	libpwdgrp/getpwnam.c:1.3->1.4 
-	libpwdgrp/getpwuid.c:1.5->1.6 
-	libpwdgrp/grent.c:1.4->1.5 
-	libpwdgrp/initgroups.c:1.6->1.7 
-	libpwdgrp/putpwent.c:1.3->1.4 
-	libpwdgrp/pwent.c:1.5->1.6 
-	libpwdgrp/setgroups.c:1.4->1.5 
-	libpwdgrp/shadow.c:1.7->1.8 
-	loginutils/Makefile:1.2->1.3 
-	loginutils/Makefile.in:1.6->1.7 
-	loginutils/addgroup.c:1.11->1.12 
-	loginutils/adduser.c:1.8->1.9 
-	loginutils/getty.c:1.9->1.10 
-	loginutils/login.c:1.14->1.15 
-	loginutils/su.c:1.6->1.7 
-	miscutils/Config.in:1.13->1.14 
-	miscutils/Makefile:1.6->1.7 
-	miscutils/Makefile.in:1.11->1.12 
-	miscutils/adjtimex.c:1.5->1.6 
-	miscutils/dc.c:1.17->1.18 
-	miscutils/hdparm.c:1.10->1.11 
-	miscutils/last.c:1.1->1.2 
-	miscutils/makedevs.c:1.15->1.16 
-	miscutils/mt.c:1.24->1.25 
-	miscutils/rx.c:1.1->1.2 
-	miscutils/strings.c:1.12->1.13 
-	miscutils/time.c:1.5->1.6 
-	miscutils/watchdog.c:1.7->1.8 
-	modutils/Config.in:1.10->1.11 
-	modutils/Makefile:1.3->1.4 
-	modutils/Makefile.in:1.2->1.3 
-	modutils/insmod.c:1.112->1.113 
-	modutils/lsmod.c:1.40->1.41 
-	modutils/rmmod.c:1.26->1.27 
-	networking/Config.in:1.27->1.28 
-	networking/Makefile:1.6->1.7 
-	networking/Makefile.in:1.17->1.18 
-	networking/ftpgetput.c:1.15->1.16 
-	networking/httpd.c:1.24->1.25 
-	networking/ifconfig.c:1.28->1.29 
-	networking/ifupdown.c:1.35->1.36 
-	networking/nc.c:1.22->1.23 
-	networking/netstat.c:1.10->1.11 
-	networking/nslookup.c:1.31->1.32 
-	networking/ping.c:1.55->1.56 
-	networking/ping6.c:1.5->1.6 
-	networking/route.c:1.24->1.25 
-	networking/telnet.c:1.42->1.43 
-	networking/telnetd.c:1.10->1.11 
-	networking/tftp.c:1.25->1.26 
-	networking/traceroute.c:1.12->1.13 
-	networking/vconfig.c:1.4->1.5 
-	networking/wget.c:1.70->1.71 
-	networking/libiproute/Makefile:1.2->1.3 
-	networking/libiproute/Makefile.in:1.4->1.5 
-	networking/libiproute/ip_parse_common_args.c:1.5->1.6 
-	networking/libiproute/ipaddress.c:1.10->1.11 
-	networking/libiproute/iplink.c:1.8->1.9 
-	networking/libiproute/iproute.c:1.12->1.13 
-	networking/libiproute/iptunnel.c:1.6->1.7 
-	networking/libiproute/libnetlink.c:1.5->1.6 
-	networking/libiproute/ll_proto.c:1.5->1.6 
-	networking/libiproute/utils.h:1.2->1.3 
-	networking/libiproute/linux/pkt_sched.h:1.1->1.2 
-	networking/udhcp/AUTHORS:1.3->1.4 
-	networking/udhcp/ChangeLog:1.7->1.8 
-	networking/udhcp/Makefile:1.2->1.3 
-	networking/udhcp/Makefile.in:1.9->1.10 
-	networking/udhcp/README:1.3->1.4 
-	networking/udhcp/README.udhcpc:1.3->1.4 
-	networking/udhcp/README.udhcpd:1.1->1.2 
-	networking/udhcp/arpping.c:1.6->1.7 
-	networking/udhcp/arpping.h:1.3->1.4 
-	networking/udhcp/clientpacket.c:1.6->1.7 
-	networking/udhcp/common.c:1.5->1.6 
-	networking/udhcp/common.h:1.2->1.3 
-	networking/udhcp/dhcpc.c:1.16->1.17 
-	networking/udhcp/dhcpd.c:1.5->1.6 
-	networking/udhcp/dhcpd.h:1.5->1.6 
-	networking/udhcp/dumpleases.c:1.8->1.9 
-	networking/udhcp/files.c:1.13->1.14 
-	networking/udhcp/frontend.c:1.1->1.2 
-	networking/udhcp/leases.c:1.5->1.6 
-	networking/udhcp/options.c:1.7->1.8 
-	networking/udhcp/packet.c:1.4->1.5 
-	networking/udhcp/packet.h:1.2->1.3 
-	networking/udhcp/script.c:1.12->1.13 
-	networking/udhcp/serverpacket.c:1.4->1.5 
-	networking/udhcp/socket.c:1.7->1.8 
-	patches/eject.diff:1.1->1.2 
-	patches/tftp_timeout_multicast.diff:1.1->1.2 
-	patches/udhcp_additional_items.diff:1.1->1.2 
-	patches/udhcp_config_paths.diff:1.1->1.2 
-	patches/udhcpd_foreground.diff:1.1->1.2 
-	procps/Makefile:1.3->1.4 
-	procps/Makefile.in:1.5->1.6 
-	procps/free.c:1.21->1.22 
-	procps/kill.c:1.51->1.52 
-	procps/pidof.c:1.9->1.10 
-	procps/ps.c:1.51->1.52 
-	procps/renice.c:1.8->1.9 
-	procps/sysctl.c:1.2->1.3 
-	procps/top.c:1.10->1.11 
-	procps/uptime.c:1.17->1.18 
-	scripts/mkdep.c:1.2->1.3 
-	scripts/split-include.c:1.1->1.2 
-	scripts/config/Kconfig-language.txt:1.1->1.2 
-	scripts/config/Makefile:1.3->1.4 
-	scripts/config/checklist.c:1.1->1.2 
-	scripts/config/dialog.h:1.1->1.2 
-	scripts/config/lex.zconf.c_shipped:1.2->1.3 
-	scripts/config/mconf.c:1.3->1.4 
-	scripts/config/menu.c:1.2->1.3 
-	scripts/config/menubox.c:1.3->1.4 
-	scripts/config/util.c:1.1->1.2 
-	scripts/config/zconf.tab.c_shipped:1.3->1.4 
-	shell/Config.in:1.12->1.13 
-	shell/Makefile:1.3->1.4 
-	shell/Makefile.in:1.2->1.3 
-	shell/ash.c:1.91->1.92 
-	shell/hush.c:1.63->1.64 
-	shell/lash.c:1.156->1.157 
-	shell/msh.c:1.15->1.16 
-	sysdeps/linux/Config.in:1.13->1.14 
-	sysklogd/Config.in:1.6->1.7 
-	sysklogd/Makefile:1.4->1.5 
-	sysklogd/Makefile.in:1.2->1.3 
-	sysklogd/klogd.c:1.19->1.20 
-	sysklogd/logger.c:1.38->1.39 
-	sysklogd/logread.c:1.14->1.15 
-	sysklogd/syslogd.c:1.107->1.108 
-	util-linux/Config.in:1.10->1.11 
-	util-linux/Makefile:1.5->1.6 
-	util-linux/Makefile.in:1.5->1.6 
-	util-linux/dmesg.c:1.31->1.32 
-	util-linux/fbset.c:1.33->1.34 
-	util-linux/fdisk.c:1.17->1.18 
-	util-linux/freeramdisk.c:1.24->1.25 
-	util-linux/fsck_minix.c:1.38->1.39 
-	util-linux/hwclock.c:1.9->1.10 
-	util-linux/mkfs_minix.c:1.40->1.41 
-	util-linux/more.c:1.59->1.60 
-	util-linux/mount.c:1.115->1.116 
-	util-linux/nfsmount.c:1.26->1.27 
-	util-linux/pivot_root.c:1.7->1.8 
-	util-linux/swaponoff.c:1.35->1.36 
-	util-linux/umount.c:1.63->1.64 
-
----------------------
-PatchSet 3991 
-Date: 2004/03/15 08:46:37
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Oops.  Using the wrong variable was a rather stupid
-thing for me to do.
-
-Members: 
-	networking/ftpgetput.c:1.16->1.17 
-
----------------------
-PatchSet 3992 
-Date: 2004/03/16 05:14:10
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from vodz to fix the dynamic vars patch, which I should not
-have checked in.  Vladimir writes:
-
-Your patch have many problem.
-1. You always added + time(). This cannot reset RANDOM=value for debuging
-with
-replay sequential.
-2. Hmm. I examine bash 2.04 source. This pseudorandom generator use low bits
-of
-counter value. You use high bits. This make bad pseudorandom values after
-have
-0-value. For example, if + time() do remove, your generator always return 0
-after
-first generate 0.
-3. Memory leak per call. Use ash-unlike unecessary bb_strdup function.
-4. Unsupport show last $RANDOM value for "set" and "export" command.
-5. Bloat code. Busybox-unlike patch - added unstandart feature as default
-hardcode.
-
-Last patch attached.
-
-Erik, why you apply Paul patch with have 5-th point problem? :(
-
-Last patch have ash change xwrite() to fresh libbb/bb_full_write interfase
-(haved loop after EINTR).
+But "./ccc" mode not changed. Previous variant works fine,
+errors skiped and continued recursion.
 
 
 --w
 vodz
 
 Members: 
-	shell/Config.in:1.13->1.14 
-	shell/ash.c:1.92->1.93 
+	libbb/recursive_action.c:1.12->1.13 
 
 ---------------------
-PatchSet 3993 
-Date: 2004/03/19 10:53:52
+PatchSet 4059 
+Date: 2004/04/08 11:27:11
+Author: bug1
+Branch: HEAD
+Tag: (none) 
+Log:
+Fix ftp resume
+Terminate returned message at <CRLF> so strtoul returns without error
+
+Members: 
+	networking/wget.c:1.72->1.73 
+
+---------------------
+PatchSet 4060 
+Date: 2004/04/09 07:59:05
+Author: bug1
+Branch: HEAD
+Tag: (none) 
+Log:
+Add a comment explaining why we have to check for an extra \n
+
+Members: 
+	archival/libunarchive/get_header_ar.c:1.9->1.10 
+
+---------------------
+PatchSet 4061 
+Date: 2004/04/12 03:22:39
+Author: bug1
+Branch: HEAD
+Tag: (none) 
+Log:
+Fix up conditional compile of files needed by ip applets
+
+Members: 
+	networking/libiproute/Makefile.in:1.5->1.6 
+
+---------------------
+PatchSet 4062 
+Date: 2004/04/12 03:35:44
+Author: bug1
+Branch: HEAD
+Tag: (none) 
+Log:
+Fix compile error if CONFIG_FEATURE_IP_ADDR isnt enabled
+
+Members: 
+	networking/ip.c:1.3->1.4 
+
+---------------------
+PatchSet 4063 
+Date: 2004/04/12 16:02:53
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Fix broken arg parsing (was not passing pointer to items so p, argc, and argv
-were only modified locally).  Fix error reporting to properly describe why
-ioctls fail.
+make mount ignore -n when CONFIG_FEATURE_MTAB_SUPPORT is disabled
 
 Members: 
-	miscutils/hdparm.c:1.11->1.12 
+	util-linux/mount.c:1.116->1.117 
 
 ---------------------
-PatchSet 3994 
-Date: 2004/03/19 12:16:18
+PatchSet 4064 
+Date: 2004/04/12 16:03:51
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Only use R_68K_GOTOFF if it is defined
+Fix spelling.  "sort of" is two words.
 
 Members: 
-	modutils/insmod.c:1.113->1.114 
+	README:1.33->1.34 
+	shell/cmdedit.c:1.90->1.91 
 
 ---------------------
-PatchSet 3995 
-Date: 2004/03/19 12:17:04
+PatchSet 4065 
+Date: 2004/04/12 16:05:10
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Add missing ELFCLASSM for m68k
+"Mac OS X" is how it is written on the Apple website
 
 Members: 
-	modutils/insmod.c:1.114->1.115 
+	README:1.34->1.35 
 
 ---------------------
-PatchSet 3996 
-Date: 2004/03/19 21:00:03
+PatchSet 4066 
+Date: 2004/04/12 16:12:06
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-As noted in a patch from Kendrick Hamilton, rmmod was only
-half way converted, and still used the old delete_module(),
-call rather than a syscall, in one spot.
+Patch from Rob Landley to fix sed documentation.
+The -i option was not documented, and in genereal
+the formatting was a bit ugly.
 
 Members: 
-	modutils/rmmod.c:1.27->1.28 
+	include/usage.h:1.202->1.203 
 
 ---------------------
-PatchSet 3997 
-Date: 2004/03/19 23:27:08
-Author: mjn3
-Branch: HEAD
-Tag: (none) 
-Log:
-Oops.. got a bit to aggressive with size optimization and global replace.  :-(
-
-Members: 
-	networking/route.c:1.25->1.26 
-
----------------------
-PatchSet 3998 
-Date: 2004/03/20 00:56:46
+PatchSet 4067 
+Date: 2004/04/12 16:23:19
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Tito noticed a printf that should have been a bb_error_msg.
+Add an extra link
 
 Members: 
-	miscutils/hdparm.c:1.12->1.13 
+	docs/busybox.net/shame.html:1.14->1.15 
 
 ---------------------
-PatchSet 3999 
-Date: 2004/03/21 18:01:46
-Author: sandman
-Branch: HEAD
-Tag: (none) 
-Log:
-The utc variable was not modified according to the -u/-l command line
-parameters.
-
-Members: 
-	util-linux/hwclock.c:1.10->1.11 
-
----------------------
-PatchSet 4000 
-Date: 2004/03/22 21:27:39
-Author: sandman
-Branch: HEAD
-Tag: (none) 
-Log:
-Some corrections from vodz:
-- Make -u/-l mutually exclusive
-- Minor size reduction
-
-Members: 
-	util-linux/hwclock.c:1.11->1.12 
-
----------------------
-PatchSet 4001 
-Date: 2004/03/23 23:15:36
+PatchSet 4068 
+Date: 2004/04/12 18:59:23
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Brian Pomerantz writes:
+Jamie Guinan writes:
 
-I've noticed a bug in the "autowidth" feature more, and is probably in
-others.  The call to the function get_terminal_width_height() passes
-in a file descriptor but that file descriptor is never used, instead
-the ioctl() is called with 0.  In more_main() the call to
-get_terminal_width_height() passes 0 as the file descriptor instead of
-fileno(cin).  This isn't a problem when you more a file (e.g. "more
-/etc/passwd") but when you pipe a file to it (e.g. "cat /etc/passwd |
-more") the size of the terminal cannot be determined because file
-descriptor 0 is not a terminal.  The fix is simple, I've attached a
-patch for more.c and get_terminal_width_height.c.
+It looks like latest uClibc defines ARCH_HAS_MMU, but a few busybox files
+test UCLIBC_HAS_MMU, resulting in vfork() getting called instead of
+fork(), etc.
 
+Patch below.   Only tested for lash.
 
-BAPper
+Cheers,
+-Jamie
 
 Members: 
-	coreutils/ls.c:1.107->1.108 
-	libbb/get_terminal_width_height.c:1.2->1.3 
-	util-linux/more.c:1.60->1.61 
+	init/init.c:1.199->1.200 
+	shell/hush.c:1.66->1.67 
+	shell/lash.c:1.159->1.160 
 
 ---------------------
-PatchSet 4002 
-Date: 2004/03/27 09:40:15
+PatchSet 4069 
+Date: 2004/04/12 20:12:13
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Update docs
+Peter Milne writes:
+
+Just upgraded from 0.6 to 1.00-pre8
+
+Dot command handling handled args correctly (same as bash) in 0.60,
+but failed in 1.00:
+
+I fixed this by reverting the dotcmd function back to previous 0.60
+instantiation,
+please consider using the older version.
+
+Thanks
+
+
+Peter
 
 Members: 
-	README:1.31->1.32 
-	TODO:1.87->1.88(DEAD) 
-	docs/busybox_footer.pod:1.13->1.14 
-	docs/busybox_header.pod:1.13->1.14 
+	shell/ash.c:1.95->1.96 
 
 ---------------------
-PatchSet 4003 
-Date: 2004/03/27 09:49:57
+PatchSet 4070 
+Date: 2004/04/12 20:17:13
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Vladimir N. Oleynik (vodz) writes:
-
-Ok. Last patch reduce 73 bytes for compensate (and over) your changes ;-)
-
-Comments:
-Added cin_fileno variable, auto setted to 0 from BSS and have "eq" stdin
-descriptor if isatty(stout)==0, removed global variable FILE* cin.
-Removed default setting to terminal_width/terminal_height, this used
-only from main() and setted after call get_terminal_width_height()
-always correct.
-Variable please_display_more_prompt changed to bits logic, have size
-reducing.
---w
-vodz
+As reported by Quy Tonthat, init has problems with inittab's that
+contain only actions sysinit/wait/once. It does not clean up zombies
+in that case.
 
 Members: 
-	util-linux/more.c:1.61->1.62 
+	init/init.c:1.200->1.201 
 
 ---------------------
-PatchSet 4004 
-Date: 2004/03/27 10:02:41
+PatchSet 4071 
+Date: 2004/04/12 20:21:54
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-s/fileno\(stdin\)/STDIN_FILENO/g
-s/fileno\(stdout\)/STDOUT_FILENO/g
+Silly me
 
 Members: 
-	archival/bunzip2.c:1.17->1.18 
-	archival/cpio.c:1.15->1.16 
-	archival/gunzip.c:1.79->1.80 
-	archival/rpm2cpio.c:1.12->1.13 
-	archival/tar.c:1.188->1.189 
-	archival/uncompress.c:1.3->1.4 
-	archival/unzip.c:1.6->1.7 
-	archival/libunarchive/data_extract_to_stdout.c:1.4->1.5 
-	coreutils/ls.c:1.108->1.109 
-	coreutils/md5_sha1_sum.c:1.6->1.7 
-	libbb/dump.c:1.9->1.10 
-	libbb/print_file.c:1.9->1.10 
-	networking/ftpgetput.c:1.17->1.18 
-	networking/nc.c:1.23->1.24 
-	networking/tftp.c:1.26->1.27 
-	networking/wget.c:1.71->1.72 
-	patches/tftp_timeout_multicast.diff:1.2->1.3 
-	shell/cmdedit.c:1.89->1.90 
-	shell/hush.c:1.64->1.65 
-	shell/lash.c:1.157->1.158 
-	util-linux/more.c:1.62->1.63 
+	init/init.c:1.201->1.202 
 
 ---------------------
-PatchSet 4005 
-Date: 2004/03/27 10:08:53
+PatchSet 4072 
+Date: 2004/04/12 21:57:17
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-passwd and sulogin also need libcrypt, via libbb/pw_encrypt()
+Eric Spakman noticed that ifdown' will attempt to run 'ifconfig'
+even if built with CONFIG_FEATURE_IFUPDOWN_IP when shutting down
+a dhcp connection.
 
 Members: 
-	loginutils/Makefile.in:1.7->1.8 
+	networking/ifupdown.c:1.36->1.37 
 
 ---------------------
-PatchSet 4006 
-Date: 2004/03/27 11:26:32
+PatchSet 4073 
+Date: 2004/04/12 22:41:29
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Add missing include files
+Wolfgang Denk writes:
+
+He,
+
+there is a bug in HUSH's handling of "if" / "elif" commands:
+
+        $  if true
+        > then
+        > echo 1
+        > elif
+        > true
+        > then
+        > echo 2
+        > elif
+        > true
+        > then
+        > echo 3
+        > else
+        > echo 4
+        > fi
+        1
+        2
+        3
+        $
+
+The same bug exists in all versions of HUSH from BB v0.60.x up to and
+including v1.00-pre9. The attached patch fixes this:
+
+        $ if true
+        > then
+        > echo 1
+        > elif
+        > true
+        > then
+        > echo 2
+        > elif
+        > true
+        > then
+        > echo 3
+        > else
+        > echo 4
+        > fi
+        1
+        $
+
+
+
+Best regards,
+
+Wolfgang Denk
 
 Members: 
-	archival/libunarchive/data_extract_to_stdout.c:1.5->1.6 
-	libbb/dump.c:1.10->1.11 
-	libbb/print_file.c:1.10->1.11 
+	shell/hush.c:1.67->1.68 
 
 ---------------------
-PatchSet 4007 
-Date: 2004/03/27 11:35:46
+PatchSet 4074 
+Date: 2004/04/12 23:49:06
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Yet more doc cleanups
+Sigh.  The patch from David Anders (prpplague) broke standard
+securetty files since the /dev was not stripped.
 
 Members: 
-	docs/busybox_header.pod:1.14->1.15 
-	include/usage.h:1.196->1.197 
+	loginutils/login.c:1.15->1.16 
 
 ---------------------
-PatchSet 4008 
-Date: 2004/03/29 08:20:08
+PatchSet 4075 
+Date: 2004/04/13 17:31:41
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-As noted by Martin Schwenke, the example for find was wrong
+Put the glibc nss junk back at the end
 
 Members: 
-	include/usage.h:1.197->1.198 
+	docs/busybox_footer.pod:1.15->1.16 
+	docs/busybox_header.pod:1.16->1.17 
 
 ---------------------
-PatchSet 4009 
-Date: 2004/03/30 09:08:58
+PatchSet 4076 
+Date: 2004/04/13 19:28:46
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-The fdisk llseek junk was redundant, since both uClibc and glibc
-automatically promote lseek and friends to their 64 bit counterparts
-when CONFIG_LFS is enabled, since it enables __USE_FILE_OFFSET64
+Fix several problems with start-stop-daemon, add -m support
 
 Members: 
-	util-linux/Config.in:1.11->1.12 
-	util-linux/fdisk.c:1.18->1.19 
+	debianutils/start_stop_daemon.c:1.13->1.14 
+	include/usage.h:1.203->1.204 
 
 ---------------------
-PatchSet 4010 
-Date: 2004/03/30 09:13:05
+PatchSet 4077 
+Date: 2004/04/13 20:25:57
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-Go ahead and kill off the FDISK_SUPPORT_LARGE_DISKS option,
-as it is redundant....
+slightly clean the whacked out formatting
 
 Members: 
-	util-linux/Config.in:1.12->1.13 
+	networking/ipcalc.c:1.8->1.9 
 
 ---------------------
-PatchSet 4011 
-Date: 2004/03/30 09:21:54
+PatchSet 4078 
+Date: 2004/04/13 20:27:20
 Author: andersen
 Branch: HEAD
 Tag: (none) 
 Log:
-As waldi noticed, checks for the size of an off_t and casting
-etc was also redundant and possibly buggy...
+Fix incorrect ipcalc usage text
 
 Members: 
-	util-linux/fdisk.c:1.19->1.20 
-
----------------------
-PatchSet 4012 
-Date: 2004/03/30 09:33:18
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Sigh.  what a mess.
-
-Members: 
-	util-linux/fdisk.c:1.20->1.21 
-
----------------------
-PatchSet 4013 
-Date: 2004/03/31 11:12:51
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from Thomas Winkler -- vi -R did not work
-
-Members: 
-	editors/vi.c:1.34->1.35 
-
----------------------
-PatchSet 4014 
-Date: 2004/03/31 11:21:24
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from Thomas Winkler showing the the system time for each process
-when running 'top'
-
-Members: 
-	patches/top_system_cpu.diff:INITIAL->1.1 
-
----------------------
-PatchSet 4015 
-Date: 2004/03/31 11:30:08
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from Thomas Winkler:
-
-ifconfig did not look up hostnames, so
-	ifconfig lo localhost
-would not work, you have to do
-	ifconfig lo 127.0.0.1
-
-Members: 
-	networking/ifconfig.c:1.29->1.30 
-
----------------------
-PatchSet 4016 
-Date: 2004/03/31 11:42:40
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Junio Hamano, junio at twinsun dot com writes:
-
-The sed command in busybox 1.0.0-pre8 loses leading whitespace
-in 'a' command ('i' and 'c' commands are also affected).  A
-patch to fix this is attached at the end of this message.
-
-The following is a transcript that reproduces the problem.  The
-first run uses busybox 1.0.0-pre3 as "/bin/sed" command, which
-gets the expected result.  Later in the test, /bin/sed symlink
-is changed to point at busybox 1.0.0-pre8 and the test script is
-run again, which shows the failure.
-
-=== reproduction recipe ===
-* Part 1.  Use busybox 1.0.0-pre3 as sed; this works.
-
-root# cd /tmp
-root# cat 1.sh
-#!/bin/sh
-
-cd /tmp
-rm -f ipsec.conf ipsec.conf+
-cat >ipsec.conf <<\EOF
-version 2.0
-
-config setup
-        klipsdebug=none
-        plutodebug=none
-        plutostderrlog=/dev/null
-
-conn %default
-        keyingtries=1
-        ...
-EOF
-sed -e '/^config setup/a\
-	nat_traversal=yes' ipsec.conf >ipsec.conf+
-mv -f ipsec.conf+ ipsec.conf
-root# sh -x 1.sh
-+ cd /tmp
-+ rm -f ipsec.conf ipsec.conf+
-+ cat
-+ sed -e /^config setup/a\
-        nat_traversal=yes ipsec.conf
-+ mv -f ipsec.conf+ ipsec.conf
-root# cat ipsec.conf
-version 2.0
-
-config setup
-        nat_traversal=yes
-        klipsdebug=none
-        plutodebug=none
-        plutostderrlog=/dev/null
-
-conn %default
-        keyingtries=1
-        ...
-root# sed --version
-sed: invalid option -- -
-BusyBox v1.00-pre3 (2004.02.26-18:47+0000) multi-call binary
-
-Usage: sed [-nef] pattern [files...]
-
-* Part 2.  Continuing from the above, use busybox 1.0.0-pre8
-  as sed; this fails.
-
-root# ln -s busybox-pre8 /bin/sed-8
-root# mv /bin/sed-8 /bin/sed
-root# sed --version
-This is not GNU sed version 4.0
-root# sed --
-BusyBox v1.00-pre8 (2004.03.30-02:44+0000) multi-call binary
-
-Usage: sed [-nef] pattern [files...]
-root# sh -x 1.sh
-+ cd /tmp
-+ rm -f ipsec.conf ipsec.conf+
-+ cat
-+ sed -e /^config setup/a\
-        nat_traversal=yes ipsec.conf
-+ mv -f ipsec.conf+ ipsec.conf
-root# cat ipsec.conf
-version 2.0
-
-config setup
-nat_traversal=yes
-        klipsdebug=none
-        plutodebug=none
-        plutostderrlog=/dev/null
-
-conn %default
-        keyingtries=1
-        ...
-root#
-=== reproduction recipe ends here ===
-
-This problem was introduced in 1.0.0-pre4.  The problem is that
-the command argument parsing code strips leading whitespaces too
-aggressively.  When running the above example, the piece of code
-in question gets "\n\tnat_traversal=yes" as its argument in
-cmdstr variable (shown part in the following patch).  What it
-needs to do at this point is to strip the first newline and
-nothing else, but it instead strips all the leading whitespaces
-at the beginning of the string, thus losing the tab character.
-The following patch fixes this.
-
-Members: 
-	editors/sed.c:1.161->1.162 
-
----------------------
-PatchSet 4017 
-Date: 2004/03/31 11:53:37
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch from Hideki IWAMOTO adding support for 'cmp -n'
-
-Members: 
-	patches/cmp_n.diff:INITIAL->1.1 
-
----------------------
-PatchSet 4018 
-Date: 2004/04/01 09:23:30
-Author: landley
-Branch: HEAD
-Tag: (none) 
-Log:
-The last patch broke:
-sed -i "/^boo/a fred" ipsec.conf
-
-Which works in gnu sed.  (And is _supposed_ to strip all the whitespace before
-"fred".)
-
-It also broke:
-sed -i -e "/^boo/a \\" -e "   fred" ipsec.conf
-
-I.E. there can legally be spaces between the a and the backslash at the end of
-the line.
-
-And strangely enough, gnu sed accepts the following syntax as well:
-sed -i "/^boo/a \\  fred" ipsec.conf
-
-Which is a way of having the significant whitespace at the start of the line,
-all on one line.  (But notice that the whitespace BEFORE the slash is still
-stripped, as is the slash itself.  And notice that the naieve placement of
-"\n" there doesn't work, it puts an n at the start of the appended line.  The
-double slashing is for shell escapes because you could escape the quote, you
-see.  It's turned into a single backslash.  But \n there is _not_ turned into
-a newline by the shell.  So there.)
-
-This makes all three syntaxes work in my tests.  I should probably start
-writing better documentation at some point.  I posted my current sedtests.py
-file to the list, which needs a lot more tests added as well...
-
-Members: 
-	editors/sed.c:1.162->1.163 
-
----------------------
-PatchSet 4019 
-Date: 2004/04/03 12:36:03
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Everything should be made as simple as possible.  But no simpler.
-
-Members: 
-	util-linux/fdformat.c:1.3->1.4 
-
----------------------
-PatchSet 4020 
-Date: 2004/04/05 14:03:34
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-rename uncompress.c to decompress_uncompress.c
-rename unzip.c to decompress_unzip.c
-
-Members: 
-	archival/libunarchive/Makefile.in:1.22->1.23 
-	archival/libunarchive/uncompress.c:1.10->1.11(DEAD) 
-	archival/libunarchive/unzip.c:1.33->1.34(DEAD) 
-
----------------------
-PatchSet 4021 
-Date: 2004/04/05 14:08:08
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Tito, farmatito at tiscali dot it writes:
-
-Hi to all,
-I discovered a little bug in hdparm.c
-(really two little bugs...I've made...sigh! Mea culpa).
-Some vars were  modified only locally and this could lead to wrong
-results to be displayed with the -I switch and maybe with others.
-Attached is a patch that fix it ( +88b).
-
-Also attached is second patch that reduces the size a little bit:
-   text    data     bss     dec     hex filename
-    27984     624     900   29508    7344 hdparm.o (without bug-fix)
-    28072     624     900   29596    739c hdparm.o (with bug-fix)
-    28141     624     900   29665    73e1 hdparm.o (original)
-but maybe this one can wait as we are in a feature freeze.
-
-Ciao,
-Tito
-
-Members: 
-	miscutils/hdparm.c:1.13->1.14 
-
----------------------
-PatchSet 4022 
-Date: 2004/04/05 14:24:07
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Per suggestion by Pawel Sakowski, fix the dash_arith() prototype
-to return a long.  We were needlessly truncating to an int.
-
-Members: 
-	shell/ash.c:1.93->1.94 
-
----------------------
-PatchSet 4023 
-Date: 2004/04/05 15:30:15
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Patch adding support for ibs= and obs= to dd
-
-Members: 
-	patches/dd_ibs_and_obs.diff:INITIAL->1.1 
-
----------------------
-PatchSet 4024 
-Date: 2004/04/05 19:46:24
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Some test additions
-
-Members: 
-	testsuite/cp/cp-a-files-to-dir:INITIAL->1.1 
-	testsuite/cp/cp-a-preserves-links:INITIAL->1.1 
-	testsuite/cp/cp-d-files-to-dir:INITIAL->1.1 
-	testsuite/cp/cp-files-to-dir:INITIAL->1.1 
-	testsuite/cp/cp-preserves-links:1.1->1.2 
-
----------------------
-PatchSet 4025 
-Date: 2004/04/06 01:41:39
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix the test suite script so it actually works and actually flags
-all errors as such.  Make verbose mode exit on FAIL and provide a
-printout of the failed test run.
-
-Members: 
-	testsuite/runtest:1.6->1.7 
-
----------------------
-PatchSet 4026 
-Date: 2004/04/06 10:38:18
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix non standard 'date -R' formatting
-
-Members: 
-	coreutils/date.c:1.45->1.46 
-
----------------------
-PatchSet 4027 
-Date: 2004/04/06 12:09:47
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Kill off the old 'tests' stuff.  Write a ton of new tests for the
-'testsuite' dir.  Fix a bunch of broken tests.  Fix the testsuite
-'runtest' script so it actually reports all failures and provides
-meaningful feedback.
- -Erik
-
-Members: 
-	testsuite/runtest:1.7->1.8 
-	testsuite/basename/basename-works:INITIAL->1.1 
-	testsuite/cmp/cmp-detects-difference:1.2->1.3 
-	testsuite/cp/cp-a-files-to-dir:1.1->1.2 
-	testsuite/cp/cp-a-preserves-links:1.1->1.2 
-	testsuite/cp/cp-d-files-to-dir:1.1->1.2 
-	testsuite/cp/cp-does-not-copy-unreadable-file:1.1->1.2 
-	testsuite/cp/cp-preserves-links:1.2->1.3 
-	testsuite/date/date-R-works:INITIAL->1.1 
-	testsuite/date/date-format-works:INITIAL->1.1 
-	testsuite/date/date-u-works:INITIAL->1.1 
-	testsuite/date/date-works:INITIAL->1.1 
-	testsuite/dirname/dirname-works:INITIAL->1.1 
-	testsuite/du/du-h-works:INITIAL->1.1 
-	testsuite/du/du-k-works:INITIAL->1.1 
-	testsuite/du/du-l-works:INITIAL->1.1 
-	testsuite/du/du-m-works:INITIAL->1.1 
-	testsuite/du/du-s-works:INITIAL->1.1 
-	testsuite/du/du-works:INITIAL->1.1 
-	testsuite/echo/echo-prints-argument:1.1->1.2 
-	testsuite/expr/expr-works:INITIAL->1.1 
-	testsuite/grep/grep-matches-NUL:1.2->1.3 
-	testsuite/head/head-n-works:INITIAL->1.1 
-	testsuite/head/head-works:INITIAL->1.1 
-	testsuite/hostid/hostid-works:INITIAL->1.1 
-	testsuite/hostname/hostname-d-works:INITIAL->1.1 
-	testsuite/hostname/hostname-i-works:INITIAL->1.1 
-	testsuite/hostname/hostname-s-works:INITIAL->1.1 
-	testsuite/hostname/hostname-works:INITIAL->1.1 
-	testsuite/id/id-g-works:INITIAL->1.1 
-	testsuite/id/id-u-works:INITIAL->1.1 
-	testsuite/id/id-un-works:INITIAL->1.1 
-	testsuite/id/id-ur-works:INITIAL->1.1 
-	testsuite/ln/ln-creates-hard-links:INITIAL->1.1 
-	testsuite/ln/ln-creates-soft-links:INITIAL->1.1 
-	testsuite/ln/ln-force-creates-hard-links:INITIAL->1.1 
-	testsuite/ln/ln-force-creates-soft-links:INITIAL->1.1 
-	testsuite/ln/ln-preserves-hard-links:INITIAL->1.1 
-	testsuite/ln/ln-preserves-soft-links:INITIAL->1.1 
-	testsuite/ls/ls-1-works:INITIAL->1.1 
-	testsuite/ls/ls-h-works:INITIAL->1.1 
-	testsuite/ls/ls-l-works:INITIAL->1.1 
-	testsuite/ls/ls-s-works:INITIAL->1.1 
-	testsuite/mv/mv-files-to-dir:INITIAL->1.1 
-	testsuite/mv/mv-follows-links:INITIAL->1.1 
-	testsuite/mv/mv-moves-empty-file:INITIAL->1.1 
-	testsuite/mv/mv-moves-hardlinks:INITIAL->1.1 
-	testsuite/mv/mv-moves-large-file:INITIAL->1.1 
-	testsuite/mv/mv-moves-small-file:INITIAL->1.1 
-	testsuite/mv/mv-moves-symlinks:INITIAL->1.1 
-	testsuite/mv/mv-moves-unreadable-files:INITIAL->1.1 
-	testsuite/mv/mv-preserves-hard-links:INITIAL->1.1 
-	testsuite/mv/mv-preserves-links:INITIAL->1.1 
-	testsuite/mv/mv-refuses-mv-dir-to-subdir:INITIAL->1.1 
-	testsuite/mv/mv-removes-source-file:INITIAL->1.1 
-	testsuite/pwd/pwd-prints-working-directory:1.1->1.2 
-	testsuite/sed/sed-append-next-line:1.2->1.3 
-	testsuite/sort/sort-n-works:INITIAL->1.1 
-	testsuite/sort/sort-r-works:INITIAL->1.1 
-	testsuite/sort/sort-works:INITIAL->1.1 
-	testsuite/strings/strings-works-like-GNU:1.1->1.2 
-	testsuite/tail/tail-n-works:INITIAL->1.1 
-	testsuite/tail/tail-works:INITIAL->1.1 
-	testsuite/tar/tar-extracts-multiple-files:1.1->1.2 
-	testsuite/tr/tr-d-works:INITIAL->1.1 
-	testsuite/tr/tr-non-gnu:INITIAL->1.1 
-	testsuite/tr/tr-works:INITIAL->1.1 
-	testsuite/uptime/uptime-works:INITIAL->1.1 
-	testsuite/uuencode/uuencode-sets-standard-input-mode-correctly:1.1->1.2 
-	testsuite/which/which-uses-default-path:1.2->1.3 
-	testsuite/xargs/xargs-works:INITIAL->1.1 
-
----------------------
-PatchSet 4028 
-Date: 2004/04/06 12:10:50
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Simplify, make formatting better match the procps version
-
-Members: 
-	procps/uptime.c:1.18->1.19 
-
----------------------
-PatchSet 4029 
-Date: 2004/04/06 12:34:02
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Minor tar test update
-
-Members: 
-	testsuite/tar/tar-extracts-multiple-files:1.2->1.3 
-
----------------------
-PatchSet 4030 
-Date: 2004/04/06 12:46:56
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Make 'allyesconfig' be a bit less stupid
-
-Members: 
-	Makefile:1.290->1.291 
-
----------------------
-PatchSet 4031 
-Date: 2004/04/06 12:51:45
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Yet more 'make allyesconfig' adjustments
-
-Members: 
-	Makefile:1.291->1.292 
-
----------------------
-PatchSet 4032 
-Date: 2004/04/06 12:56:25
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Christian Grigis, christian.grigis at smartdata dot ch writes:
-
-Hello everyone,
-
-Busybox's insmod fails to locate a module when that module is the only one
-existing in the /lib/modules directory (with a unique name).
-
-Example:
-
-# find /lib/modules/ -type f
-/lib/modules/kernel/drivers/char/bios.o
-# insmod bios
-insmod: bios.o: no module by that name found
-# touch /lib/modules/dummy
-# find /lib/modules/ -type f
-/lib/modules/kernel/drivers/char/bios.o
-/lib/modules/dummy
-# insmod bios
-Using /lib/modules/kernel/drivers/char/bios.o
-
-As long as there is another file in the /lib/modules directory, insmod
-finds it OK.
-
-I tracked the problem down to 'check_module_name_match()' in insmod.c:
-
-It returns TRUE when a match is found, and FALSE otherwise. In the case
-where there is only one module in the /lib/modules directory (or more that
-one module, but all with the same name), 'recursive_action()' will return
-TRUE and we end up on line 4196 in 'insmod.c' which returns an error.
-[The reason it works with more than one module with different
-names is that in this case there will always be one not matching,
-'recursive_action()' will return FALSE and we end up in line 4189.]
-
-Now, from the implementation of 'recursive_action()' and from other
-usages of it (tar.c, etc.), it seems to me that FALSE should be returned
-to indicate that we want to stop the recursion, so TRUE and FALSE should
-be inverted in 'check_module_name_match()'.
-
-At the same time, 'recursive_action()' continues to recurse even after
-the recursive call has returned FALSE; again in my understanding and
-other usages of it, we can safely stop recursing at this point.
-
-
-Here is my patch against 1.00-pre8:
-
-Members: 
-	libbb/recursive_action.c:1.11->1.12 
-	modutils/insmod.c:1.115->1.116 
-
----------------------
-PatchSet 4033 
-Date: 2004/04/06 13:04:14
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Michael Tokarev, mjt at tls dot msk dot ru writes:
-
-Initialize all fields of struct dep_t.
-Without that, e.g. `busybox modprobe -v char-major-10-144' *sometimes*
-fails this way (strace):
-
- write(1, "insmod    nvram `\213\f\10\n", 21) = 21
-
-Note the garbage after module name which is taken from the m_options field,
-which is not initialized in the alias reading/parsing part.
-(Shell properly complains to this command, telling it can't find the
-closing backtick)
-
-Members: 
-	modutils/modprobe.c:1.28->1.29 
-
----------------------
-PatchSet 4034 
-Date: 2004/04/06 13:05:04
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Michael Tokarev, mjt at tls dot msk dot ru writes:
-
-alias 'off' parsing fix.
-It is not
- alias off module
-it is
- alias module off
-
-Members: 
-	modutils/modprobe.c:1.29->1.30 
-
----------------------
-PatchSet 4035 
-Date: 2004/04/06 13:06:03
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Michael Tokarev, mjt at tls dot msk dot ru writes:
-
-Fix parsing of all tag-value pairs (in modules.conf in particular).
-Without this fix, code chokes badly on lines where either value or
-both tag+value are missing, like bare
- alias
-line, or alias w/o the value like
- alias some-module
-(syntactically incorrect, but no need for coredumps either).
-
-Members: 
-	modutils/modprobe.c:1.30->1.31 
-
----------------------
-PatchSet 4036 
-Date: 2004/04/06 15:28:34
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix it so usage is _always_ in sync with applets.c.  Previously,
-broken depends allowed these to get out of sync.
-
-Members: 
-	Makefile:1.292->1.293 
-	Rules.mak:1.29->1.30 
-	applets/Makefile.in:1.4->1.5 
-	applets/applets.c:1.24->1.25 
-	applets/usage.c:1.59->1.60(DEAD) 
-
----------------------
-PatchSet 4037 
-Date: 2004/04/06 16:19:52
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix it so build dependancies actually work and do something useful
-
-Members: 
-	Makefile:1.293->1.294 
-
----------------------
-PatchSet 4038 
-Date: 2004/04/06 16:26:25
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Eliminate all trace of the sgml based docs.  It was a noble effort,
-but it just never worked out...
-
-Members: 
-	Makefile:1.294->1.295 
-	docs/autodocifier.pl:1.25->1.26 
-	docs/busybox.sgml:1.54->1.55(DEAD) 
-
----------------------
-PatchSet 4039 
-Date: 2004/04/06 16:39:19
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Yet more doc updates
-
-Members: 
-	README:1.32->1.33 
-	docs/busybox_header.pod:1.15->1.16 
-	docs/busybox.net/screenshot.html:1.10->1.11 
-
----------------------
-PatchSet 4040 
-Date: 2004/04/06 17:36:20
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-yet-more doc updates and cleanups
-
-Members: 
-	include/usage.h:1.198->1.199 
-
----------------------
-PatchSet 4041 
-Date: 2004/04/06 17:56:00
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix indenting
-
-Members: 
-	networking/Makefile.in:1.18->1.19 
-
----------------------
-PatchSet 4042 
-Date: 2004/04/06 17:59:43
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Seem not many people are using 'ipaddr' since it has
-never worked....  Most people use 'ip addr foo' I suppose.
-
-Members: 
-	include/applets.h:1.112->1.113 
-
----------------------
-PatchSet 4043 
-Date: 2004/04/06 18:16:36
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Yet more doc cleanups.  Many thanks to Robert P. J. Day for
-kindly reviewing the existing docs and providing helpful feedback.
-
-Members: 
-	include/usage.h:1.199->1.200 
-
----------------------
-PatchSet 4044 
-Date: 2004/04/06 18:52:02
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Yet more doc updates
-
-Members: 
-	AUTHORS:1.42->1.43 
-	docs/busybox_footer.pod:1.14->1.15 
-	include/usage.h:1.200->1.201 
-
----------------------
-PatchSet 4045 
-Date: 2004/04/06 18:53:09
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix buffalo url
-
-Members: 
-	docs/busybox.net/products.html:1.7->1.8 
-
----------------------
-PatchSet 4046 
-Date: 2004/04/06 18:58:37
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Bump version to -pre9
-
-Members: 
-	Rules.mak:1.30->1.31 
-
----------------------
-PatchSet 4047 
-Date: 2004/04/07 10:17:14
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Update the default config
-
-Members: 
-	sysdeps/linux/defconfig:1.6->1.7 
-
----------------------
-PatchSet 4048 
-Date: 2004/04/07 10:34:27
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Remove the CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN option.  It was sortof
-stupid and didn't work properly anyways.
-
-Members: 
-	debian/config-static:1.14->1.15 
-	debian/config-udeb:1.18->1.19 
-	debian/config-udeb-linux:1.1->1.2 
-	shell/Config.in:1.14->1.15 
-	shell/ash.c:1.94->1.95 
-	shell/hush.c:1.65->1.66 
-	shell/lash.c:1.158->1.159 
-	shell/msh.c:1.16->1.17 
-
----------------------
-PatchSet 4049 
-Date: 2004/04/07 11:34:16
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Add an example inetd.conf file
-
-Members: 
-	examples/inetd.conf:INITIAL->1.1 
-
----------------------
-PatchSet 4050 
-Date: 2004/04/07 13:26:57
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-More doc updates
-
-Members: 
-	docs/busybox.net/license.html:1.3->1.4 
-	docs/busybox.net/products.html:1.8->1.9 
-	docs/busybox.net/shame.html:1.9->1.10 
-
----------------------
-PatchSet 4051 
-Date: 2004/04/07 13:57:15
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Mention Acronis PartitionExpert
-
-Members: 
-	docs/busybox.net/shame.html:1.10->1.11 
-
----------------------
-PatchSet 4052 
-Date: 2004/04/07 15:02:40
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Minor update
-
-Members: 
-	docs/busybox.net/shame.html:1.11->1.12 
-
----------------------
-PatchSet 4053 
-Date: 2004/04/07 15:07:27
-Author: andersen
-Branch: HEAD
-Tag: (none) 
-Log:
-Fix url
-
-Members: 
-	docs/busybox.net/shame.html:1.12->1.13 
+	include/usage.h:1.204->1.205 
 
diff --git a/Rules.mak b/Rules.mak
index 79f3b50..dc27b67 100644
--- a/Rules.mak
+++ b/Rules.mak
@@ -19,7 +19,7 @@
 
 #--------------------------------------------------------
 PROG      := busybox
-VERSION   := 1.00-pre9
+VERSION   := 1.00-pre10
 BUILDTIME := $(shell TZ=UTC date -u "+%Y.%m.%d-%H:%M%z")
 
 
diff --git a/docs/busybox.net/news.html b/docs/busybox.net/news.html
index 1f55053..550a211 100644
--- a/docs/busybox.net/news.html
+++ b/docs/busybox.net/news.html
@@ -3,6 +3,25 @@
 
 <ul>
 
+  <li><b>13 April 2004 -- BusyBox 1.0.0-pre10 released</b><p>
+
+    Ok, I lied.  It turns out that -pre9 will not be the final BusyBox
+    pre-release.  With any luck however -pre10 will be, since I <b>really</b>
+    want to get BusyBox 1.0.0 released this week.  As usual, please do not
+    bother to send in patches adding cool new features at this time.  Only
+    bug-fix patches will be accepted.  It would also be <b>very</b> helpful if
+    people could continue to review the BusyBox documentation and submit
+    improvements.
+
+    <p>
+    The <a href="downloads/Changelog">changelog</a> has all the details.
+    And as usual you can <a href="downloads">download busybox here</a>.
+
+    <p>Have Fun!
+    <p>
+
+
+  <p>
   <li><b>6 April 2004 -- BusyBox 1.0.0-pre9 released</b><p>
 
     Here goes the final BusyBox pre-release...  This is your last chance for
@@ -53,95 +72,6 @@
     <p>
 
 
-  <p>
-  <li><b>4 February 2004 -- BusyBox 1.0.0-pre7 released</b><p>
-
-    There was a bug in -pre6 that broke argument parsing for a
-    number of applets, since a variable was not being zeroed out
-    properly.  This release is primarily intended to fix that one
-    problem.  In addition, this release fixes several other
-    problems, including a rewrite by mjn3 of the code for parsing
-    the busybox.conf file used for suid handling, some shell updates
-    from vodz, and a scattering of other small fixes.  We are still
-    aiming to finish off the -pre series in February and move on to
-    the final 1.0.0 release...  If you see any problems, of have
-    suggestions to make, as always, please feel free to email the
-    busybox mailing list.
-
-    <p>
-
-    The <a href="downloads/Changelog">changelog</a> has all
-    the details.  And as usual you can
-    <a href="downloads">download busybox here</a>.
-
-    <p>Have Fun!
-    <p>
-
-
-  <p>
-  <li><b>30 January 2004 -- BusyBox 1.0.0-pre6 released</b><p>
-
-    Here goes the next pre-release for the new BusyBox stable
-    series.  This release adds a number of size optimizations,
-    updates udhcp, fixes up 2.6 modutils support, updates ash
-    and the shell command line editing, and the usual pile of
-    bug fixes both large and small.  Things appear to be
-    settling down now, so with a bit of luck and some testing
-    perhaps we can finish off the -pre series in February and
-    move on to the final 1.0.0 release...  If you see any
-    problems, of have suggestions to make, as always, please
-    feel free to email the busybox mailing list.
-
-    <p>
-
-    People who rely on the <a href= "downloads/snapshots/">daily BusyBox snapshots</a>
-    should be aware that snapshots of the old busybox 0.60.x
-    series are no longer available.  Daily snapshots are now
-    only available for the BusyBox 1.0.0 series and now use
-    the naming scheme "busybox-&lt;date&gt;.tar.bz2".  Please
-    adjust any build scripts using the old naming scheme accordingly.
-
-    <p>
-
-    The <a href="downloads/Changelog">changelog</a> has all
-    the details.  And as usual you can
-    <a href="downloads">download busybox here</a>.
-
-    <p>Have Fun!
-    <p>
-
-
-  <p>
-  <li><b>23 December 2003 -- BusyBox 1.0.0-pre5 released</b><p>
-
-    Here goes the next pre-release for the new BusyBox stable
-    series.  The most obvious thing in this release is a fix for
-    a terribly stupid bug in mount that prevented it from working
-    properly unless you specified the filesystem type.  This
-    release also fixes a few compile problems, updates udhcp,
-    fixes a silly bug in fdisk, fixes ifup/ifdown to behave like
-    the Debian version, updates devfsd, updates the 2.6.x
-    modutils support, add a new 'rx' applet, removes the obsolete
-    'loadacm' applet, fixes a few tar bugs, fixes a sed bug, and
-    a few other odd fixes.
-
-    <p>
-
-    If you see any problems, of have suggestions to make, as
-    always, please feel free to send an email to the busybox
-    mailing list.
-
-    <p>
-
-    The <a href="downloads/Changelog">changelog</a> has all
-    the details.  And as usual you can
-    <a href="downloads">download busybox here</a>.
-
-    <p>Have Fun!
-    <p>
-
-
-
     <p>
     <li><b>Old News</b><p>
     <a href="/oldnews.html">Click here to read older news</a>
diff --git a/docs/busybox.net/oldnews.html b/docs/busybox.net/oldnews.html
index fa7566c..7882246 100644
--- a/docs/busybox.net/oldnews.html
+++ b/docs/busybox.net/oldnews.html
@@ -3,6 +3,94 @@
 
 <ul>
 
+  <li><b>4 February 2004 -- BusyBox 1.0.0-pre7 released</b><p>
+
+    There was a bug in -pre6 that broke argument parsing for a
+    number of applets, since a variable was not being zeroed out
+    properly.  This release is primarily intended to fix that one
+    problem.  In addition, this release fixes several other
+    problems, including a rewrite by mjn3 of the code for parsing
+    the busybox.conf file used for suid handling, some shell updates
+    from vodz, and a scattering of other small fixes.  We are still
+    aiming to finish off the -pre series in February and move on to
+    the final 1.0.0 release...  If you see any problems, of have
+    suggestions to make, as always, please feel free to email the
+    busybox mailing list.
+
+    <p>
+
+    The <a href="downloads/Changelog">changelog</a> has all
+    the details.  And as usual you can
+    <a href="downloads">download busybox here</a>.
+
+    <p>Have Fun!
+    <p>
+
+
+  <p>
+  <li><b>30 January 2004 -- BusyBox 1.0.0-pre6 released</b><p>
+
+    Here goes the next pre-release for the new BusyBox stable
+    series.  This release adds a number of size optimizations,
+    updates udhcp, fixes up 2.6 modutils support, updates ash
+    and the shell command line editing, and the usual pile of
+    bug fixes both large and small.  Things appear to be
+    settling down now, so with a bit of luck and some testing
+    perhaps we can finish off the -pre series in February and
+    move on to the final 1.0.0 release...  If you see any
+    problems, of have suggestions to make, as always, please
+    feel free to email the busybox mailing list.
+
+    <p>
+
+    People who rely on the <a href= "downloads/snapshots/">daily BusyBox snapshots</a>
+    should be aware that snapshots of the old busybox 0.60.x
+    series are no longer available.  Daily snapshots are now
+    only available for the BusyBox 1.0.0 series and now use
+    the naming scheme "busybox-&lt;date&gt;.tar.bz2".  Please
+    adjust any build scripts using the old naming scheme accordingly.
+
+    <p>
+
+    The <a href="downloads/Changelog">changelog</a> has all
+    the details.  And as usual you can
+    <a href="downloads">download busybox here</a>.
+
+    <p>Have Fun!
+    <p>
+
+
+  <p>
+  <li><b>23 December 2003 -- BusyBox 1.0.0-pre5 released</b><p>
+
+    Here goes the next pre-release for the new BusyBox stable
+    series.  The most obvious thing in this release is a fix for
+    a terribly stupid bug in mount that prevented it from working
+    properly unless you specified the filesystem type.  This
+    release also fixes a few compile problems, updates udhcp,
+    fixes a silly bug in fdisk, fixes ifup/ifdown to behave like
+    the Debian version, updates devfsd, updates the 2.6.x
+    modutils support, add a new 'rx' applet, removes the obsolete
+    'loadacm' applet, fixes a few tar bugs, fixes a sed bug, and
+    a few other odd fixes.
+
+    <p>
+
+    If you see any problems, of have suggestions to make, as
+    always, please feel free to send an email to the busybox
+    mailing list.
+
+    <p>
+
+    The <a href="downloads/Changelog">changelog</a> has all
+    the details.  And as usual you can
+    <a href="downloads">download busybox here</a>.
+
+    <p>Have Fun!
+    <p>
+
+
+
   <li><b>10 December 2003 -- BusyBox 1.0.0-pre4 released</b><p>
 
     Here goes the fourth pre-release for the new BusyBox stable