diff --git a/docs/ipv4_ipv6.txt b/docs/ipv4_ipv6.txt
deleted file mode 100644
index 92010b5..0000000
--- a/docs/ipv4_ipv6.txt
+++ /dev/null
@@ -1,223 +0,0 @@
-We need better network address conv helpers.
-This is what our applets want:
-
-          sockaddr -> hostname
-udhcp:    hostname -> ipv4 addr
-nslookup: hostname -> list of names - done
-tftp:     host,port -> sockaddr
-nc:       host,port -> sockaddr
-inetd: ?
-traceroute: ?, hostname -> ipv4 addr
-arping    hostname -> ipv4 addr
-ping6     hostname -> ipv6 addr
-ifconfig  hostname -> ipv4 addr (FIXME error check?)
-ipcalc    ipv4 addr -> hostname
-syslogd   hostname -> sockaddr
-inet_common.c: buggy. hostname -> ipv4 addr
-mount     hostname -> sockaddr_in
-
-==================
-HOWTO get rid of inet_ntoa/aton:
-
-foo.sin_addr.s_addr = inet_addr(cp);
--
-inet_pton(AF_INET, cp, &foo.sin_addr);
-
-inet_aton(cp, &foo.sin_addr);
--
-inet_pton(AF_INET, cp, &foo.sin_addr);
-
-ptr = inet_ntoa(foo.sin_addr);
--
-char str[INET_ADDRSTRLEN];
-ptr = inet_ntop(AF_INET, &foo.sin_addr, str, sizeof(str));
-
-===================
-
-       struct addrinfo {
-           int     ai_flags;
-           int     ai_family;
-           int     ai_socktype;
-           int     ai_protocol;
-           size_t  ai_addrlen;
-           struct sockaddr *ai_addr;
-           char   *ai_canonname;
-           struct addrinfo *ai_next;
-       };
-       int getaddrinfo(const char *node, const char *service,
-                       const struct addrinfo *hints,
-                       struct addrinfo **res);
-
-       void freeaddrinfo(struct addrinfo *res);
-
-       const char *gai_strerror(int errcode);
-
-       The members ai_family, ai_socktype, and ai_protocol have the same  meaning
-       as  the corresponding parameters in the socket(2) system call.  The getad-
-       drinfo(3) function returns socket addresses in either IPv4 or IPv6 address
-       family, (ai_family will be set to either AF_INET or AF_INET6).
-
-       The  hints  parameter specifies the preferred socket type, or protocol.  A
-       NULL hints specifies that any network address or protocol  is  acceptable.
-       If  this  parameter  is  not NULL it points to an addrinfo structure whose
-       ai_family, ai_socktype, and  ai_protocol  members  specify  the  preferred
-       socket type.  AF_UNSPEC in ai_family specifies any protocol family (either
-       IPv4 or IPv6, for example).  0 in  ai_socktype  or  ai_protocol  specifies
-       that any socket type or protocol is acceptable as well.  The ai_flags mem-
-       ber specifies additional options, defined below.  Multiple flags are spec-
-       ified  by  logically  OR-ing  them together.  All the other members in the
-       hints parameter must contain either 0, or a null pointer.
-
-       The node or service parameter, but not both, may be NULL.  node  specifies
-       either  a  numerical network address (dotted-decimal format for IPv4, hex-
-       adecimal format for IPv6) or a network hostname, whose  network  addresses
-       are looked up and resolved.  If hints.ai_flags contains the AI_NUMERICHOST
-       flag then the node parameter must be a  numerical  network  address.   The
-       AI_NUMERICHOST  flag  suppresses  any  potentially  lengthy  network  host
-       address lookups.
-
-       The getaddrinfo(3) function creates a linked list of addrinfo  structures,
-       one  for  each  network address subject to any restrictions imposed by the
-       hints parameter.  The ai_canonname field of the first  of  these  addrinfo
-       structures  is  set  to  point  to  the  official  name  of  the  host, if
-       hints.ai_flags includes the AI_CANONNAME  flag.   ai_family,  ai_socktype,
-       and  ai_protocol specify the socket creation parameters.  A pointer to the
-       socket address is placed in the ai_addr member,  and  the  length  of  the
-       socket address, in bytes, is placed in the ai_addrlen member.
-
-       If  node is NULL, the network address in each socket structure is initial-
-       ized according to the AI_PASSIVE flag, which  is  set  in  hints.ai_flags.
-       The  network  address in each socket structure will be left unspecified if
-       AI_PASSIVE flag is set.  This is used by server applications, which intend
-       to  accept client connections on any network address.  The network address
-       will be set to the loopback interface address if the  AI_PASSIVE  flag  is
-       not  set.  This is used by client applications, which intend to connect to
-       a server running on the same network host.
-
-       If hints.ai_flags includes the AI_ADDRCONFIG flag, then IPv4 addresses are
-       returned  in the list pointed to by result only if the local system has at
-       least has at least one IPv4 address configured,  and  IPv6  addresses  are
-       only  returned  if  the local system has at least one IPv6 address config-
-       ured.
-
-       If hint.ai_flags specifies the AI_V4MAPPED flag, and  hints.ai_family  was
-       specified as AF_INET6, and no matching IPv6 addresses could be found, then
-       return IPv4-mapped IPv6 addresses in the list pointed to  by  result.   If
-       both  AI_V4MAPPED and AI_ALL are specified in hints.ai_family, then return
-       both IPv6 and IPv4-mapped IPv6 addresses in the list pointed to by result.
-       AI_ALL is ignored if AI_V4MAPPED is not also specified.
-
-       service  sets the port number in the network address of each socket struc-
-       ture.  If service is NULL the port number will be left uninitialized.   If
-       AI_NUMERICSERV  is  specified  in  hints.ai_flags and service is not NULL,
-       then service must point to a string  containing  a  numeric  port  number.
-       This  flag  is used to inhibit the invocation of a name resolution service
-       in cases where it is known not to be required.
-
-
-==============
-
-       int getnameinfo(const struct sockaddr *sa, socklen_t salen,
-                       char *host, size_t hostlen,
-                       char *serv, size_t servlen, int flags);
-
-       The  getnameinfo(3)  function is defined for protocol-independent
-       address-to-nodename translation.  It combines the functionality
-       of gethostbyaddr(3) and getservbyport(3) and is the inverse of
-       getaddrinfo(3).  The sa argument is a pointer to a generic socket address
-       structure (of type sockaddr_in or  sockaddr_in6)  of  size  salen  that
-       holds  the  input IP address and port number.  The arguments host and
-       serv are pointers to buffers (of size hostlen and servlen respectively)
-       to hold the return values.
-
-       The caller can specify that no hostname (or no service name) is required
-       by providing a NULL host (or serv) argument or a zero hostlen (or servlen)
-       parameter. However, at least one of hostname or service name must be requested.
-
-       The flags argument modifies the behaviour of getnameinfo(3) as follows:
-
-       NI_NOFQDN
-              If set, return only the hostname part of the FQDN for local hosts.
-
-       NI_NUMERICHOST
-              If set, then the numeric form of the hostname is returned.
-              (When not set, this will still happen in case the node's name
-              cannot be looked up.)
-
-       NI_NAMEREQD
-              If set, then a error is returned if the hostname cannot be looked up.
-
-       NI_NUMERICSERV
-              If set, then the service address is returned in numeric form,
-              for example by its port number.
-
-       NI_DGRAM
-              If  set, then the service is datagram (UDP) based rather than stream
-              (TCP) based. This is required for the few ports (512-514) that have different
-              services for UDP and TCP.
-
-=================
-
-Modified IPv6-aware C code:
-
-    struct addrinfo *res, *aip;
-    struct addrinfo hints;
-    int sock = -1;
-    int error;
-
-    /* Get host address. Any type of address will do. */
-    memset(&hints, 0, sizeof(hints));
-    hints.ai_flags = AI_ALL|AI_ADDRCONFIG;
-    hints.ai_socktype = SOCK_STREAM;
-
-    error = getaddrinfo(hostname, servicename, &hints, &res);
-    if (error != 0) {
-       (void) fprintf(stderr,
-          "getaddrinfo: %s for host %s service %s\n",
-          gai_strerror(error), hostname, servicename);
-       return -1;
-    }
-    /* Try all returned addresses until one works */
-    for (aip = res; aip != NULL; aip = aip->ai_next) {
-       /*
-       * Open socket. The address type depends on what
-       * getaddrinfo() gave us.
-       */
-       sock = socket(aip->ai_family, aip->ai_socktype, aip->ai_protocol);
-       if (sock == -1) {
-          perror("socket");
-          freeaddrinfo(res);
-          return -1;
-       }
-
-       /* Connect to the host. */
-       if (connect(sock, aip->ai_addr, aip->ai_addrlen) == -1) {
-          perror("connect");
-          (void) close(sock);
-          sock = -1;
-          continue;
-       }
-       break;
-    }
-    freeaddrinfo(res);
-
-Note that for new applications, if you write address-family-agnostic data structures,
-there is no need for porting.
-
-However, when it comes to server-side programming in C/C++, there is an additional wrinkle.
-Namely, depending on whether your application is written for a dual-stack platform, such
-as Solaris or Linux, or a single-stack platform, such as Windows, you would need to
-structure the code differently.
-
-Here's the corresponding server C code for a dual-stack platform:
-
-    int ServSock, csock;
-    /* struct sockaddr is too small! */
-    struct sockaddr_storage addr, from;
-    ...
-    ServSock = socket(AF_INET6, SOCK_STREAM, PF_INET6);
-    bind(ServSock, &addr, sizeof(addr));
-    do {
-       csock = accept(ServSocket, &from, sizeof(from));
-       doClientStuff(csock);
-    } while (!finished);
diff --git a/docs/new-applet-HOWTO.txt b/docs/new-applet-HOWTO.txt
index 37a78e9..6f89cbe 100644
--- a/docs/new-applet-HOWTO.txt
+++ b/docs/new-applet-HOWTO.txt
@@ -46,6 +46,7 @@
 int mu_main(int argc, char **argv)
 {
 	int fd;
+	ssize_t n;
 	char mu;
 
 	fd = xopen("/dev/random", O_RDONLY);
@@ -123,7 +124,7 @@
 
 Add the applet to Config.in in the chosen directory:
 
-config CONFIG_MU
+config MU
 	bool "MU"
 	default n
 	help