BlueZ D-Bus Device API description
**********************************


Device hierarchy
================

Service		org.bluez
Interface	org.bluez.Device1
Object path	[variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX

Methods		void Connect()

			This is a generic method to connect any profiles
			the remote device supports that can be connected
			to and have been flagged as auto-connectable on
			our side.

			Possible errors: org.bluez.Error.NotReady
					 org.bluez.Error.Failed
					 org.bluez.Error.InProgress
					 org.bluez.Error.AlreadyConnected

		void CancelConnect()

			This method can be used to cancel a preceeding
			Connect call before a reply to it has been received.

		void Disconnect()

			This method disconnects a specific remote device by
			terminating the low-level ACL connection. The use of
			this method should be restricted to administrator
			use.

			Possible errors: org.bluez.Error.NotConnected

		void ConnectProfile(string uuid)

			This method connects a specific profile of this
			device. The UUID provided is the remote service
			UUID for the profile.

			Possible errors: org.bluez.Error.DoesNotExist
					 org.bluez.Error.AlreadyConnected
					 org.bluez.Error.ConnectFailed

		void DisconnectProfile(string uuid)

			This method disconnects a specific profile of
			this device. The profile needs to be registered
			client profile.

			There is no connection tracking for a profile, so
			as long as the profile is registered this will always
			succeed.

			Possible errors: org.bluez.Error.DoesNotExist
					 org.bluez.Error.NotConnected

		void Pair()

			This method will connect to the remote device,
			initiate pairing and then retrieve all SDP records
			(or GATT primary services).

			If the application has registered its own agent,
			then that specific agent will be used. Otherwise
			it will use the default agent.

			Only for applications like a pairing wizard it
			would make sense to have its own agent. In almost
			all other cases the default agent will handle
			this just fine.

			In case there is no application agent and also
			no default agent present, this method will fail.

			Possible errors: org.bluez.Error.InvalidArguments
					 org.bluez.Error.Failed

		void CancelPairing()

			This method can be used to cancel a pairing
			operation initiated by the Pair method.

			Possible errors: org.bluez.Error.DoesNotExist
					 org.bluez.Error.Failed

Properties	string Address [readonly]

			The Bluetooth device address of the remote device.

		string Name [readonly]

			The Bluetooth remote name. This value can not be
			changed. Use the Alias property instead.

			This value is only present for completeness. It is
			better to always use the Alias property when
			displaying the devices name.

			If the Alias property is unset, it will reflect
			this value which makes it more convenient.

		string VendorSource [readonly] [optional]

			Vendor source numeric identifier.

			Only "bluetooth" and "usb" sources are supported.

		uint16 Vendor [readonly] [optional]

			Vendor unique numeric identifier.

		uint16 Product [readonly] [optional]

			Product unique numeric identifier.

		uint16 Version [readonly] [optional]

			Version unique numeric identifier.

		string Icon [readonly] [optional]

			Proposed icon name according to the freedesktop.org
			icon naming specification.

		uint32 Class [readonly] [optional]

			The Bluetooth class of device of the remote device.

		uint16 Appearance [readonly] [optional]

			External appearance of device, as found on GAP service.

		array{string} UUIDs [readonly]

			List of 128-bit UUIDs that represents the available
			remote services.

		boolean Paired [readonly]

			Indicates if the remote device is paired.

		boolean Connected [readonly]

			Indicates if the remote device is currently connected.
			A PropertiesChanged signal indicate changes to this
			status.

		boolean Trusted [readwrite]

			Indicates if the remote is seen as trusted. This
			setting can be changed by the application.

		boolean Blocked [readwrite]

			If set to true any incoming connections from the
			device will be immediately rejected. Any device
			drivers will also be removed and no new ones will
			be probed as long as the device is blocked.

		string Alias [readwrite]

			The name alias for the remote device. The alias can
			be used to have a different friendly name for the
			remote device.

			In case no alias is set, it will return the remote
			device name. Setting an empty string as alias will
			convert it back to the remote device name.

			When resetting the alias with an empty string, the
			emitted PropertiesChanged signal will show the remote
			name again.

		object Adapter [readonly]

			The object path of the adapter the device belongs to.

		boolean LegacyPairing [readonly]

			Set to true if the device only supports the pre-2.1
			pairing mechanism. This property is useful in the
			Adapter.DeviceFound signal to anticipate whether
			legacy or simple pairing will occur.

			Note that this property can exhibit false-positives
			in the case of Bluetooth 2.1 (or newer) devices that
			have disabled Extended Inquiry Response support.