.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
.TH L2TEST "1" "April 2018"
.SH NAME
l2test \- L2CAP testing tool
.SH DESCRIPTION
l2test \- L2CAP testing tool
Usage:
.IP
l2test <mode> [options] [bdaddr]
.SS "Modes:"
.HP
\fB\-r\fR listen and receive
.HP
\fB\-w\fR listen and send
.HP
\fB\-d\fR listen and dump incoming data
.HP
\fB\-x\fR listen, then send, then dump incoming data
.HP
\fB\-t\fR listen, then send and receive at the same time
.HP
\fB\-q\fR connect, then send and receive at the same time
.HP
\fB\-s\fR connect and send
.HP
\fB\-u\fR connect and receive
.HP
\fB\-n\fR connect and be silent
.HP
\fB\-y\fR connect, then send, then dump incoming data
.HP
\fB\-c\fR connect, disconnect, connect, ...
.HP
\fB\-m\fR multiple connects
.HP
\fB\-p\fR trigger dedicated bonding
.HP
\fB\-z\fR information request
.SH OPTIONS
.IP
[\-b bytes] [\-i device] [\-P psm] [\-J cid]
[\-I imtu] [\-O omtu]
[\-L seconds] enable SO_LINGER
[\-W seconds] enable deferred setup
[\-B filename] use data packets from file
[\-N num] send num frames (default = infinite)
[\-C num] send num frames before delay (default = 1)
[\-D milliseconds] delay after sending num frames (default = 0)
[\-K milliseconds] delay before receiving (default = 0)
[\-g milliseconds] delay before disconnecting (default = 0)
[\-X mode] l2cap mode (help for list, default = basic)
[\-a policy] chan policy (help for list, default = bredr)
[\-F fcs] use CRC16 check (default = 1)
[\-Q num] Max Transmit value (default = 3)
[\-Z size] Transmission Window size (default = 63)
[\-Y priority] socket priority
[\-H size] Maximum receive buffer size
[\-R] reliable mode
[\-G] use connectionless channel (datagram)
[\-U] use sock stream
[\-A] request authentication
[\-E] request encryption
[\-S] secure connection
[\-M] become master
[\-T] enable timestamps
[\-V type] address type (help for list, default = bredr)
[\-e seq] initial sequence value (default = 0)
.SS "Usage:"
.IP
l2test <mode> [options] [bdaddr]
.SS "Modes:"
.HP
\fB\-r\fR listen and receive
.HP
\fB\-w\fR listen and send
.HP
\fB\-d\fR listen and dump incoming data
.HP
\fB\-x\fR listen, then send, then dump incoming data
.HP
\fB\-t\fR listen, then send and receive at the same time
.HP
\fB\-q\fR connect, then send and receive at the same time
.HP
\fB\-s\fR connect and send
.HP
\fB\-u\fR connect and receive
.HP
\fB\-n\fR connect and be silent
.HP
\fB\-y\fR connect, then send, then dump incoming data
.HP
\fB\-c\fR connect, disconnect, connect, ...
.HP
\fB\-m\fR multiple connects
.HP
\fB\-p\fR trigger dedicated bonding
.HP
\fB\-z\fR information request
.IP
[\-b bytes] [\-i device] [\-P psm] [\-J cid]
[\-I imtu] [\-O omtu]
[\-L seconds] enable SO_LINGER
[\-W seconds] enable deferred setup
[\-B filename] use data packets from file
[\-N num] send num frames (default = infinite)
[\-C num] send num frames before delay (default = 1)
[\-D milliseconds] delay after sending num frames (default = 0)
[\-K milliseconds] delay before receiving (default = 0)
[\-g milliseconds] delay before disconnecting (default = 0)
[\-X mode] l2cap mode (help for list, default = basic)
[\-a policy] chan policy (help for list, default = bredr)
[\-F fcs] use CRC16 check (default = 1)
[\-Q num] Max Transmit value (default = 3)
[\-Z size] Transmission Window size (default = 63)
[\-Y priority] socket priority
[\-H size] Maximum receive buffer size
[\-R] reliable mode
[\-G] use connectionless channel (datagram)
[\-U] use sock stream
[\-A] request authentication
[\-E] request encryption
[\-S] secure connection
[\-M] become master
[\-T] enable timestamps
[\-V type] address type (help for list, default = bredr)
[\-e seq] initial sequence value (default = 0)