..
    Copyright 2019,2020 NXP


.. highlight:: bat

.. _ex-se05x-info:

=======================================================================
 SE05X Get Info example
=======================================================================

This project can be used to get SE05X platform information with or without applet installed.


Building the Demo
=======================================================================

- Build Plug & Trust middleware stack. (Refer :ref:`building`)
- Project: ``se05x_GetInfo``


Running the Example
=======================================================================

If you have built a binary, flash the binary on to the board and reset
the board.

If you have built an *exe* to be run from Windows using VCOM, run as::

    se05x_GetInfo.exe <PORT NAME>

Where **<PORT NAME>** is the VCOM COM port.

On Raspberry-Pi or iMX board, run as::

    ./se05x_GetInfo


Console output
=======================================================================

If everything is successful, the output will be similar to:

.. literalinclude:: out_se05x_GetInfo.rst.txt
   :start-after: Opening connection to JRCP server on 127.0.0.1:8050