| #!/bin/bash |
| set -e |
| |
| |
| # Sonar code quality |
| if ! [ -z ${SONAR+x} ]; then |
| if ([ "${TRAVIS_REPO_SLUG}" != "open62541/open62541" ] || |
| [ "${TRAVIS_PULL_REQUEST}" != "false" ] || |
| [ "${TRAVIS_BRANCH}" != "master" ]); then |
| echo "Skipping Sonarcloud on forks" |
| # Skip on forks |
| exit 0; |
| fi |
| mkdir -p build && cd build |
| build-wrapper-linux-x86-64 --out-dir ../bw-output cmake \ |
| -DCMAKE_BUILD_TYPE=Debug \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_DISCOVERY=ON \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=ON \ |
| -DUA_ENABLE_ENCRYPTION .. \ |
| && make -j |
| cd .. |
| sonar-scanner |
| exit 0 |
| fi |
| |
| # Docker build test |
| if ! [ -z ${DOCKER+x} ]; then |
| docker build -t open62541 . |
| docker run -d -p 127.0.0.1:4840:4840 --name open62541 open62541 /bin/sh |
| docker ps | grep -q open62541 |
| # disabled since it randomly fails |
| # docker ps | grep -q open62541 |
| exit 0 |
| fi |
| |
| # Cpplint checking |
| if ! [ -z ${LINT+x} ]; then |
| mkdir -p build |
| cd build |
| cmake .. |
| make cpplint |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| exit 0 |
| fi |
| |
| # Fuzzer build test |
| if ! [ -z ${FUZZER+x} ]; then |
| # First check if the build is successful |
| ./tests/fuzz/check_build.sh |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| |
| |
| # Test the corpus generator and use new corpus for fuzz test |
| ./tests/fuzz/generate_corpus.sh |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| |
| cd build_fuzz |
| make && make run_fuzzer |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| exit 0 |
| fi |
| |
| # INSTALL build test |
| if ! [ -z ${INSTALL+x} ]; then |
| echo "=== Install build, then compile examples ===" && echo -en 'travis_fold:start:script.build.install\\r' |
| # Use make install to deploy files and then test if we can build the examples based on the installed files |
| mkdir -p build |
| cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DUA_NAMESPACE_ZERO=FULL \ |
| -DUA_ENABLE_AMALGAMATION=OFF \ |
| -DCMAKE_INSTALL_PREFIX=$TRAVIS_BUILD_DIR/open62541_install .. |
| make -j install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.install\\r' |
| |
| echo -en 'travis_fold:start:script.build.mini-example\\r' |
| # Now create a simple CMake Project which uses the installed file |
| mkdir compile |
| cp -r examples compile/examples && cd compile/examples |
| cmake \ |
| -DCMAKE_PREFIX_PATH=$TRAVIS_BUILD_DIR/open62541_install \ |
| -DUA_NAMESPACE_ZERO=FULL . |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd ../.. |
| rm -rf compile |
| echo -en 'travis_fold:end:script.build.mini-example\\r' |
| exit 0 |
| fi |
| |
| if ! [ -z ${CLANG_FORMAT+x} ]; then |
| |
| # Only run clang format on Pull requests, not on direct push |
| if [ "$TRAVIS_PULL_REQUEST" = "false" ]; then |
| echo -en "\\nSkipping clang-format on non-pull request\\n" |
| exit 0 |
| fi |
| |
| echo "=== Running clang-format with diff against branch '$TRAVIS_BRANCH' ===" && echo -en 'travis_fold:start:script.clang-format\\r' |
| |
| # add clang-format-ci |
| curl -Ls "https://raw.githubusercontent.com/llvm-mirror/clang/c510fac5695e904b43d5bf0feee31cc9550f110e/tools/clang-format/git-clang-format" -o "$LOCAL_PKG/bin/git-clang-format" |
| chmod +x $LOCAL_PKG/bin/git-clang-format |
| |
| # Ignore files in the deps directory diff by resetting them to master |
| git diff --name-only $TRAVIS_BRANCH | grep 'deps/*' | xargs git checkout $TRAVIS_BRANCH -- |
| |
| # clang-format the diff to the target branch of the PR |
| difference="$($LOCAL_PKG/bin/git-clang-format --style=file --diff $TRAVIS_BRANCH)" |
| |
| if ! case $difference in *"no modified files to format"*) false;; esac; then |
| echo "====== clang-format did not find any issues. Well done! ======" |
| exit 0 |
| fi |
| if ! case $difference in *"clang-format did not modify any files"*) false;; esac; then |
| echo "====== clang-format did not find any issues. Well done! ======" |
| exit 0 |
| fi |
| |
| echo "====== clang-format Format Errors ======" |
| |
| echo "Uploading the patch to a pastebin page ..." |
| pastebinUrl="$($LOCAL_PKG/bin/git-clang-format --style=file --diff $TRAVIS_BRANCH | curl -F 'sprunge=<-' http://sprunge.us)" |
| |
| echo "Created a patch file under: $pastebinUrl" |
| |
| echo "Please fix the following issues.\n\n" |
| echo "You can also use the following command to apply the diff to your source locally:\n-------------\n" |
| echo "curl -o format.patch $pastebinUrl && git apply format.patch\n-------------\n" |
| echo "=============== DIFFERENCE - START =================\n" |
| # We want to get colored diff output into the variable |
| git config color.diff always |
| $LOCAL_PKG/bin/git-clang-format --binary=clang-format-6.0 --style=file --diff $TRAVIS_BRANCH |
| echo "\n============= DIFFERENCE - END ====================" |
| |
| echo -en 'travis_fold:start:script.clang-format\\r' |
| exit 1 |
| fi |
| |
| if ! [ -z ${ANALYZE+x} ]; then |
| echo "=== Running static code analysis ===" && echo -en 'travis_fold:start:script.analyze\\r' |
| if ! case $CC in clang*) false;; esac; then |
| mkdir -p build |
| cd build |
| scan-build-6.0 cmake \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_BUILD_UNIT_TESTS=ON .. |
| scan-build-6.0 -enable-checker security.FloatLoopCounter \ |
| -enable-checker security.insecureAPI.UncheckedReturn \ |
| --status-bugs -v \ |
| make -j |
| cd .. && rm build -rf |
| |
| mkdir -p build |
| cd build |
| scan-build-6.0 cmake \ |
| -DUA_ENABLE_PUBSUB=ON \ |
| -DUA_ENABLE_PUBSUB_DELTAFRAMES=ON \ |
| -DUA_ENABLE_PUBSUB_INFORMATIONMODEL=ON .. |
| scan-build-6.0 -enable-checker security.FloatLoopCounter \ |
| -enable-checker security.insecureAPI.UncheckedReturn \ |
| --status-bugs -v \ |
| make -j |
| cd .. && rm build -rf |
| |
| mkdir -p build |
| cd build |
| scan-build-6.0 cmake \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| scan-build-6.0 -enable-checker security.FloatLoopCounter \ |
| -enable-checker security.insecureAPI.UncheckedReturn \ |
| --status-bugs -v \ |
| make -j |
| cd .. && rm build -rf |
| |
| #mkdir -p build && cd build |
| #cmake -DUA_ENABLE_STATIC_ANALYZER=REDUCED .. |
| ## previous clang-format to reduce to non-trivial warnings |
| #make clangformat |
| #make |
| #cd .. && rm build -rf |
| else |
| cppcheck --template "{file}({line}): {severity} ({id}): {message}" \ |
| --enable=style --force --std=c++11 -j 8 \ |
| --suppress=duplicateBranch \ |
| --suppress=incorrectStringBooleanError \ |
| --suppress=invalidscanf --inline-suppr \ |
| -I include src plugins examples 2> cppcheck.txt |
| if [ -s cppcheck.txt ]; then |
| echo "====== CPPCHECK Static Analysis Errors ======" |
| cat cppcheck.txt |
| # flush output |
| sleep 5 |
| exit 1 |
| fi |
| fi |
| echo -en 'travis_fold:end:script.analyze\\r' |
| exit 0 |
| fi |
| |
| echo -en "\r\n=== Building ===\r\n" |
| |
| echo -e "\r\n== Documentation build ==" && echo -en 'travis_fold:start:script.build.doc\\r' |
| mkdir -p build |
| cd build |
| cmake \ |
| -DCMAKE_BUILD_TYPE=Release \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON .. |
| make doc |
| make doc_pdf |
| cp -r doc ../../ |
| cp -r doc_latex ../../ |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.doc\\r' |
| |
| # cross compilation only with gcc |
| if ! [ -z ${MINGW+x} ]; then |
| echo -e "\r\n== Cross compile release build for MinGW 32 bit ==" && echo -en 'travis_fold:start:script.build.cross_mingw32\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-win32 \ |
| -DCMAKE_TOOLCHAIN_FILE=../tools/cmake/Toolchain-mingw32.cmake \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| make install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. |
| zip -r open62541-win32.zip ../doc_latex/open62541.pdf LICENSE AUTHORS README.md open62541-win32/* |
| rm build -rf |
| echo -en 'travis_fold:end:script.build.cross_mingw32\\r' |
| |
| echo -e "\r\n== Cross compile release build for MinGW 64 bit ==" && echo -en 'travis_fold:start:script.build.cross_mingw64\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-win64 \ |
| -DCMAKE_TOOLCHAIN_FILE=../tools/cmake/Toolchain-mingw64.cmake \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| make install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. |
| zip -r open62541-win64.zip ../doc_latex/open62541.pdf LICENSE AUTHORS README.md open62541-win64/* |
| rm build -rf |
| echo -en 'travis_fold:end:script.build.cross_mingw64\\r' |
| |
| echo -e "\r\n== Cross compile release build for 32-bit linux ==" && echo -en 'travis_fold:start:script.build.cross_linux\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-linux32 \ |
| -DCMAKE_TOOLCHAIN_FILE=../tools/cmake/Toolchain-gcc-m32.cmake \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| make install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. |
| tar -pczf open62541-linux32.tar.gz ../doc_latex/open62541.pdf LICENSE AUTHORS README.md open62541-linux32/* |
| rm build -rf |
| echo -en 'travis_fold:end:script.build.cross_linux\\r' |
| |
| echo -e "\r\n== Cross compile release build for RaspberryPi ==" && echo -en 'travis_fold:start:script.build.cross_raspi\\r' |
| mkdir -p build && cd build |
| git clone https://github.com/raspberrypi/tools |
| export PATH=$PATH:${TRAVIS_BUILD_DIR}/build/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/ |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-raspberrypi \ |
| -DCMAKE_TOOLCHAIN_FILE=../tools/cmake/Toolchain-rpi64.cmake \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| make install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. |
| tar -pczf open62541-raspberrypi.tar.gz ../doc_latex/open62541.pdf LICENSE AUTHORS README.md open62541-raspberrypi/* |
| rm build -rf |
| echo -en 'travis_fold:end:script.build.cross_raspi\\r' |
| fi |
| |
| echo -e "\r\n== Compile release build for 64-bit linux ==" && echo -en 'travis_fold:start:script.build.linux_64\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-linux64 \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| make install |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. |
| tar -pczf open62541-linux64.tar.gz ../doc_latex/open62541.pdf LICENSE AUTHORS README.md open62541-linux64/* |
| rm build -rf |
| echo -en 'travis_fold:end:script.build.linux_64\\r' |
| |
| echo -e "\r\n== Compile with amalgamation ==" && echo -en 'travis_fold:start:script.build.amalgamate\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DCMAKE_BUILD_TYPE=RelWithDebInfo \ |
| -DCMAKE_INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/open62541-linux64 \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=OFF \ |
| -DUA_ENABLE_AMALGAMATION=ON \ |
| -DUA_ENABLE_HISTORIZING=ON .. |
| make -j |
| cp open62541.h ../.. # copy single file-release |
| cp open62541.c ../.. # copy single file-release |
| gcc -std=c99 -c open62541.c |
| g++ ../examples/server.cpp -I./ open62541.o -lrt -o cpp-server |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.amalgamate\\r' |
| |
| echo "Compile as shared lib version" && echo -en 'travis_fold:start:script.build.shared_libs\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DBUILD_SHARED_LIBS=ON \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_AMALGAMATION=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.shared_libs\\r' |
| |
| if [ "$CC" != "tcc" ]; then |
| echo -e "\r\n==Compile multithreaded version==" && echo -en 'travis_fold:start:script.build.multithread\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_MULTITHREADING=200 .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.multithread\\r' |
| fi |
| |
| echo -e "\r\n== Compile with encryption ==" && echo -en 'travis_fold:start:script.build.encryption\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_ENCRYPTION=ON .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.encryption\\r' |
| |
| echo -e "\r\n== Compile without discovery version ==" && echo -en 'travis_fold:start:script.build.discovery\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_DISCOVERY=OFF \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=OFF .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.discovery\\r' |
| |
| if [ "$CC" != "tcc" ]; then |
| echo -e "\r\n== Compile multithreaded version with discovery ==" && echo -en 'travis_fold:start:script.build.multithread_discovery\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_ENABLE_DISCOVERY=ON \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=ON \ |
| -DUA_MULTITHREADING=200 .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.multithread_discovery\\r' |
| fi |
| |
| echo -e "\r\n== Compile JSON encoding ==" && echo -en 'travis_fold:start:script.build.json\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_ENABLE_JSON_ENCODING=ON .. |
| make -j |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.json\\r' |
| |
| echo -e "\r\n== Unit tests (full NS0) ==" && echo -en 'travis_fold:start:script.build.unit_test_ns0_full\\r' |
| mkdir -p build && cd build |
| # Valgrind cannot handle the full NS0 because the generated file is too big. Thus run NS0 full without valgrind |
| cmake \ |
| -DCMAKE_BUILD_TYPE=Debug \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_BUILD_UNIT_TESTS=ON \ |
| -DUA_ENABLE_COVERAGE=OFF \ |
| -DUA_ENABLE_DA=ON \ |
| -DUA_ENABLE_DISCOVERY=ON \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=ON \ |
| -DUA_ENABLE_ENCRYPTION=ON \ |
| -DUA_ENABLE_JSON_ENCODING=ON \ |
| -DUA_ENABLE_PUBSUB=ON \ |
| -DUA_ENABLE_PUBSUB_DELTAFRAMES=ON \ |
| -DUA_ENABLE_PUBSUB_INFORMATIONMODEL=ON \ |
| -DUA_ENABLE_SUBSCRIPTIONS=ON \ |
| -DUA_ENABLE_SUBSCRIPTIONS_EVENTS=ON \ |
| -DUA_ENABLE_UNIT_TESTS_MEMCHECK=OFF \ |
| -DUA_NAMESPACE_ZERO=FULL .. |
| make -j && make test ARGS="-V" |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.unit_test_ns0_full\\r' |
| |
| if ! [ -z ${DEBIAN+x} ]; then |
| echo -e "\r\n== Building the Debian package ==" && echo -en 'travis_fold:start:script.build.debian\\r' |
| /usr/bin/$PYTHON ./tools/prepare_packaging.py |
| echo -e "\r\n --- New debian changelog content ---" |
| echo "--------------------------------------" |
| cat ./debian/changelog |
| echo "--------------------------------------" |
| # Create a backup copy. We need the clean debian directory for later packaging |
| cp -r debian debian_bak |
| dpkg-buildpackage -b |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| rm -rf debian |
| mv debian_bak debian |
| cp ../libopen62541*.deb . |
| # Copy for github release script |
| cp ../libopen62541*.deb ../.. |
| echo -en 'travis_fold:end:script.build.debian\\r' |
| fi |
| |
| |
| if [ "$CC" != "tcc" ]; then |
| echo -e "\r\n== Unit tests (minimal NS0) ==" && echo -en 'travis_fold:start:script.build.unit_test_ns0_minimal\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DCMAKE_BUILD_TYPE=Debug \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_BUILD_UNIT_TESTS=ON \ |
| -DUA_ENABLE_COVERAGE=ON \ |
| -DUA_ENABLE_DA=ON \ |
| -DUA_ENABLE_DISCOVERY=ON \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=ON \ |
| -DUA_ENABLE_ENCRYPTION=ON \ |
| -DUA_ENABLE_JSON_ENCODING=ON \ |
| -DUA_ENABLE_PUBSUB=ON \ |
| -DUA_ENABLE_PUBSUB_DELTAFRAMES=ON \ |
| -DUA_ENABLE_PUBSUB_INFORMATIONMODEL=OFF \ |
| -DUA_ENABLE_UNIT_TESTS_MEMCHECK=ON \ |
| -DUA_NAMESPACE_ZERO=MINIMAL .. |
| make -j && make test ARGS="-V" |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.unit_test_ns0_minimal\\r' |
| |
| echo -e "\r\n== Unit tests (reduced NS0) ==" && echo -en 'travis_fold:start:script.build.unit_test_ns0_reduced\\r' |
| mkdir -p build && cd build |
| cmake \ |
| -DCMAKE_BUILD_TYPE=Debug \ |
| -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/$PYTHON \ |
| -DUA_BUILD_EXAMPLES=ON \ |
| -DUA_BUILD_UNIT_TESTS=ON \ |
| -DUA_ENABLE_COVERAGE=ON \ |
| -DUA_ENABLE_DA=ON \ |
| -DUA_ENABLE_DISCOVERY=ON \ |
| -DUA_ENABLE_DISCOVERY_MULTICAST=ON \ |
| -DUA_ENABLE_ENCRYPTION=ON \ |
| -DUA_ENABLE_JSON_ENCODING=ON \ |
| -DUA_ENABLE_PUBSUB=ON \ |
| -DUA_ENABLE_PUBSUB_DELTAFRAMES=ON \ |
| -DUA_ENABLE_PUBSUB_INFORMATIONMODEL=ON \ |
| -DUA_ENABLE_UNIT_TESTS_MEMCHECK=ON \ |
| -DUA_NAMESPACE_ZERO=REDUCED .. |
| make -j && make test ARGS="-V" |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| echo -en 'travis_fold:end:script.build.unit_test_ns0_reduced\\r' |
| |
| # only run coveralls on main repo and when MINGW=true |
| # We only want to build coveralls once, so we just take the travis run where MINGW=true which is only enabled once |
| echo -e "\r\n== -> Current repo: ${TRAVIS_REPO_SLUG} ==" |
| if [ $MINGW = "true" ] && [ "${TRAVIS_REPO_SLUG}" = "open62541/open62541" ]; then |
| echo -en "\r\n== Building codecov.io for ${TRAVIS_REPO_SLUG} ==" && echo -en 'travis_fold:start:script.build.codecov\\r' |
| cd .. |
| /bin/bash -c "bash <(curl -s https://codecov.io/bash)" |
| if [ $? -ne 0 ] ; then exit 1 ; fi |
| cd build |
| echo -en 'travis_fold:end:script.build.codecov\\r' |
| |
| echo -en "\r\n== Building coveralls for ${TRAVIS_REPO_SLUG} ==" && echo -en 'travis_fold:start:script.build.coveralls\\r' |
| coveralls -E '.*/build/CMakeFiles/.*' -E '.*/examples/.*' -E '.*/tests/.*' -E '.*\.h' -E '.*CMakeCXXCompilerId\.cpp' -E '.*CMakeCCompilerId\.c' -r ../ || true # ignore result since coveralls is unreachable from time to time |
| cd .. && rm build -rf |
| echo -en 'travis_fold:end:script.build.coveralls\\r' |
| |
| if [ "${TRAVIS_PULL_REQUEST}" = "false" ]; then |
| REAL_BRANCH="${TRAVIS_BRANCH}" |
| echo -en "== Checking branch for packing: BRANCH_FOR_TAG='$BRANCH_FOR_TAG' and TRAVIS_TAG='${TRAVIS_TAG}'. \n" |
| if [ "${TRAVIS_TAG}" = "${TRAVIS_BRANCH}" ]; then |
| REAL_BRANCH="$BRANCH_FOR_TAG" |
| echo -en "== Commit is tag build for '${TRAVIS_TAG}'. Detected branch for tag = '$BRANCH_FOR_TAG' \n" |
| fi |
| |
| if [ "${REAL_BRANCH}" = "master" ] || [ "${REAL_BRANCH}" = "1.0" ]; then |
| # Create a separate branch with the `pack/` prefix. This branch has the correct debian/changelog set, and |
| # The submodules are directly copied |
| echo -e "\r\n== Pushing 'pack/${REAL_BRANCH}' branch ==" && echo -en 'travis_fold:start:script.build.pack-branch\\r' |
| |
| git checkout -b pack-tmp/${REAL_BRANCH} |
| cp -r deps/mdnsd deps/mdnsd_back |
| cp -r deps/ua-nodeset deps/ua-nodeset_back |
| git rm -rf --cached deps/mdnsd |
| git rm -rf --cached deps/ua-nodeset |
| mv deps/mdnsd_back deps/mdnsd |
| rm -rf deps/mdnsd/.git |
| mv deps/ua-nodeset_back deps/ua-nodeset |
| rm -rf deps/ua-nodeset/.git |
| rm -rf .gitmodules |
| git add deps/* |
| git add debian/* |
| git add CMakeLists.txt |
| git commit -m "[ci skip] Pack with inline submodules" |
| git remote add origin-auth https://$GITAUTH@github.com/${TRAVIS_REPO_SLUG} |
| git push -uf origin-auth pack-tmp/${REAL_BRANCH}:pack/${REAL_BRANCH} |
| |
| echo -en 'travis_fold:end:script.build.pack-branch\\r' |
| else |
| echo -en "== Skipping push to pack/ because branch does not match: REAL_BRANCH='${REAL_BRANCH}' \n" |
| fi |
| else |
| echo -en "== Skipping push to pack/ because TRAVIS_PULL_REQUEST=false \n" |
| fi |
| |
| |
| fi |
| fi |