/*
 * Copyright 2018 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#if defined(MBEDTLS_ECP_C)

#include "mbedtls/ecp.h"
#include "mbedtls/threading.h"
#include "mbedtls/platform_util.h"

#include <string.h>

#if defined(MBEDTLS_ECP_ALT)

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*******************************************************************************
 * Prototypes
 ******************************************************************************/

/*******************************************************************************
 * Variables
 ******************************************************************************/

/*******************************************************************************
 * Codes
 ******************************************************************************/
#if defined(MBEDTLS_MCUX_CASPER_ECC)

#if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) || defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) || \
    defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED)
#error "CASPER hw acceleration currently supported only for SECP256R1 and SECP384R1."
#endif

/* CASPER driver allows usage of 256 or 384 ECC, not both at once */
#if defined(CASPER_ECC_P256) && (CASPER_ECC_P256 > 0)
#define ECC_SIZE_BITS (256)
#elif defined(CASPER_ECC_P384) && (CASPER_ECC_P384 > 0)
#define ECC_SIZE_BITS (384)
#endif

/* Parameter validation macros based on platform_util.h */
#define ECP_VALIDATE_RET( cond )    \
    MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_ECP_BAD_INPUT_DATA )
#define ECP_VALIDATE( cond )        \
    MBEDTLS_INTERNAL_VALIDATE( cond )

#define ECC_SIZE_BYTES (ECC_SIZE_BITS / 8) /* 32 for 256 bits and 48 for 384 bits */

typedef struct _ecp
{
    union
    {
        uint8_t b[4 + ECC_SIZE_BYTES * 2];
        uint32_t w[(4 + ECC_SIZE_BYTES * 2) / 4];
    } data;
} casper_ecp_t;

static void reverse_array(uint8_t *src, size_t src_len)
{
    int i;

    for (i = 0; i < src_len / 2; i++)
    {
        uint8_t tmp;

        tmp                  = src[i];
        src[i]               = src[src_len - 1 - i];
        src[src_len - 1 - i] = tmp;
    }
}

#if defined(MBEDTLS_ECP_MUL_COMB_ALT)
int ecp_mul_comb(mbedtls_ecp_group *grp,
                 mbedtls_ecp_point *R,
                 const mbedtls_mpi *m,
                 const mbedtls_ecp_point *P,
                 int (*f_rng)(void *, unsigned char *, size_t),
                 void *p_rng,
                 mbedtls_ecp_restart_ctx *rs_ctx ) /* TBD: rs_ctx is not used MBEDTLS_ECP_RESTARTABLE is not supported */
{
    casper_ecp_t p                                = {0};
    uint32_t M[ECC_SIZE_BYTES / sizeof(uint32_t)] = {0};

    size_t olen = sizeof(casper_ecp_t);

    mbedtls_ecp_point_write_binary(grp, P, MBEDTLS_ECP_PF_UNCOMPRESSED, &olen, &p.data.b[3], sizeof(casper_ecp_t));
    reverse_array(&p.data.b[4], ECC_SIZE_BYTES);
    reverse_array(&p.data.b[4 + ECC_SIZE_BYTES], ECC_SIZE_BYTES);
    CASPER_ecc_init();

    if (mbedtls_mpi_size(m) > sizeof(M))
    {
        __BKPT(0);
        return MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
    }
    mbedtls_mpi_write_binary(m, (void *)M, ECC_SIZE_BYTES);
    reverse_array((void *)M, ECC_SIZE_BYTES);
#if (ECC_SIZE_BITS == 256)
    CASPER_ECC_SECP256R1_Mul(CASPER, &p.data.w[1], &p.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], &p.data.w[1],
                             &p.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)M);
#elif (ECC_SIZE_BITS == 384)
    CASPER_ECC_SECP384R1_Mul(CASPER, &p.data.w[1], &p.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], &p.data.w[1],
                             &p.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)M);
#endif
    reverse_array(&p.data.b[4], ECC_SIZE_BYTES);
    reverse_array(&p.data.b[4 + ECC_SIZE_BYTES], ECC_SIZE_BYTES);
    mbedtls_ecp_point_read_binary(grp, R, &p.data.b[3], 2 * ECC_SIZE_BYTES + 1);
    return 0;
}
#endif /* MBEDTLS_ECP_MUL_COMB_ALT */

#if defined(MBEDTLS_ECP_MULADD_ALT)
/*
 * Restartable linear combination
 * NOT constant-time
 */
int mbedtls_ecp_muladd_restartable(
             mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
             const mbedtls_mpi *m, const mbedtls_ecp_point *P,
             const mbedtls_mpi *n, const mbedtls_ecp_point *Q,
             mbedtls_ecp_restart_ctx *rs_ctx ) /* TBD restartable is not implemented */
{
    casper_ecp_t p1 = {0};
    casper_ecp_t p2 = {0};

    uint32_t M[ECC_SIZE_BYTES / sizeof(uint32_t)] = {0};
    uint32_t N[ECC_SIZE_BYTES / sizeof(uint32_t)] = {0};

    size_t olen1 = sizeof(casper_ecp_t);

    /* shortcut for (m == 1) && (n == 1). this case is point addition. */
    /* this shortcut follows original mbedtls_ecp_muladd() implementation */
    /* and is required for ecjpake_ecp_add3(). */
    if ((mbedtls_mpi_cmp_int(m, 1) == 0) && (mbedtls_mpi_cmp_int(n, 1) == 0))
    {
        return ecp_add(grp, R, P, Q);
    }

    mbedtls_ecp_point_write_binary(grp, P, MBEDTLS_ECP_PF_UNCOMPRESSED, &olen1, &p1.data.b[3], sizeof(casper_ecp_t));
    reverse_array(&p1.data.b[4], ECC_SIZE_BYTES);
    reverse_array(&p1.data.b[4 + ECC_SIZE_BYTES], ECC_SIZE_BYTES);

    CASPER_ecc_init();

    if (mbedtls_mpi_size(m) > sizeof(M))
    {
        __BKPT(0);
        return MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
    }
    mbedtls_mpi_write_binary(m, (void *)M, ECC_SIZE_BYTES);
    reverse_array((void *)M, ECC_SIZE_BYTES);
    /* */
    size_t olen2 = sizeof(casper_ecp_t);

    mbedtls_ecp_point_write_binary(grp, Q, MBEDTLS_ECP_PF_UNCOMPRESSED, &olen2, &p2.data.b[3], sizeof(casper_ecp_t));
    reverse_array(&p2.data.b[4], ECC_SIZE_BYTES);
    reverse_array(&p2.data.b[4 + ECC_SIZE_BYTES], ECC_SIZE_BYTES);

    if (mbedtls_mpi_size(n) > sizeof(N))
    {
        __BKPT(0);
        return MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL;
    }
    mbedtls_mpi_write_binary(n, (void *)N, ECC_SIZE_BYTES);
    reverse_array((void *)N, ECC_SIZE_BYTES);
#if (ECC_SIZE_BITS == 256)
    CASPER_ECC_SECP256R1_MulAdd(CASPER, &p1.data.w[1], &p1.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))],
                                &p1.data.w[1], &p1.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)M,
                                &p2.data.w[1], &p2.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)N);
#elif (ECC_SIZE_BITS == 384)
    CASPER_ECC_SECP384R1_MulAdd(CASPER, &p1.data.w[1], &p1.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))],
                                &p1.data.w[1], &p1.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)M,
                                &p2.data.w[1], &p2.data.w[1 + (ECC_SIZE_BYTES / sizeof(uint32_t))], (void *)N);
#endif
    reverse_array(&p1.data.b[4], ECC_SIZE_BYTES);
    reverse_array(&p1.data.b[4 + ECC_SIZE_BYTES], ECC_SIZE_BYTES);
    mbedtls_ecp_point_read_binary(grp, R, &p1.data.b[3], 2 * ECC_SIZE_BYTES + 1);
    return 0;
}

/*
 * Linear combination
 * NOT constant-time
 */
int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
             const mbedtls_mpi *m, const mbedtls_ecp_point *P,
             const mbedtls_mpi *n, const mbedtls_ecp_point *Q )
{
    ECP_VALIDATE_RET( grp != NULL );
    ECP_VALIDATE_RET( R   != NULL );
    ECP_VALIDATE_RET( m   != NULL );
    ECP_VALIDATE_RET( P   != NULL );
    ECP_VALIDATE_RET( n   != NULL );
    ECP_VALIDATE_RET( Q   != NULL );
    return( mbedtls_ecp_muladd_restartable( grp, R, m, P, n, Q, NULL ) );
}
#endif /* MBEDTLS_ECP_MULADD_ALT */

#endif /* MBEDTLS_MCUX_CASPER_ECC */

#endif /* MBEDTLS_ECP_ALT */
#endif /* MBEDTLS_ECP_C */