| .. |
| Copyright 2019,2020 NXP |
| |
| |
| |
| .. highlight:: bat |
| |
| .. _ex-se05x-ReadState: |
| |
| ======================================================================= |
| SE05X Read State example |
| ======================================================================= |
| |
| This project can be used to get SE05X state information. |
| The state information is w.r.t |
| |
| 1) LockState |
| #) Restriction on Object Creation |
| #) Platform SCP mandate state |
| |
| Refer to :cpp:type:`SE05x_LockState_t` |
| Refer to :cpp:type:`SE05x_RestrictMode_t` |
| Refer to :cpp:type:`SE05x_PlatformSCPRequest_t` |
| |
| .. literalinclude:: se05x_ReadState.c |
| :language: c |
| :dedent: 4 |
| :start-after: /* doc:start:read state variables */ |
| :end-before: /* doc:end:read state variables*/ |
| |
| |
| Building the Demo |
| ======================================================================= |
| |
| - Build Plug & Trust middleware stack. (Refer :ref:`building`) |
| - Project: ``se05x_ReadState`` |
| |
| |
| Running the Example |
| ======================================================================= |
| |
| If you have built a binary, flash the binary on to the board and reset |
| the board. |
| |
| If you have built an *exe* to be run from Windows using VCOM, run as:: |
| |
| se05x_ReadState.exe <PORT NAME> |
| |
| Where **<PORT NAME>** is the VCOM COM port. |
| |
| On Raspberry-Pi or iMX board, run as:: |
| |
| ./se05x_ReadState |
| |
| |
| Console output |
| ======================================================================= |
| |
| If everything is successful, the output will be similar to: |
| |
| .. literalinclude:: out_se05x_ReadState.rst.txt |
| :start-after: sss :WARN :!!!Not recommended for production use.!!! |
