| .. |
| Copyright 2019,2020 NXP |
| |
| |
| |
| .. highlight:: bat |
| |
| .. _ex-se05x-info: |
| |
| ======================================================================= |
| SE05X Get Info example |
| ======================================================================= |
| |
| This project can be used to get SE05X platform information with or without applet installed. |
| |
| |
| Building the Demo |
| ======================================================================= |
| |
| - Build Plug & Trust middleware stack. (Refer :ref:`building`) |
| - Project: ``se05x_GetInfo`` |
| |
| |
| Running the Example |
| ======================================================================= |
| |
| If you have built a binary, flash the binary on to the board and reset |
| the board. |
| |
| If you have built an *exe* to be run from Windows using VCOM, run as:: |
| |
| se05x_GetInfo.exe <PORT NAME> |
| |
| Where **<PORT NAME>** is the VCOM COM port. |
| |
| On Raspberry-Pi or iMX board, run as:: |
| |
| ./se05x_GetInfo |
| |
| |
| Console output |
| ======================================================================= |
| |
| If everything is successful, the output will be similar to: |
| |
| .. literalinclude:: out_se05x_GetInfo.rst.txt |
| :start-after: Opening connection to JRCP server on 127.0.0.1:8050 |